|
||
Just a thought about the Concepts Platform...stars1010 12-08-2005, 02:08 PM Since we know GM won’t use the CV6 production platform under the NAIAS concept...... Does anyone think they may use the current GTO's? In my eyes the concept we've seen would fit the general proportions of the production GTO. Any thoughts? turbo96z28 12-08-2005, 02:20 PM my first thought is you need to put down the pipe and walk away for awhile :p j/k. i think the concept is either gonna sport a GTO platform or a modified Sigma chassis. 91_z28_4me 12-08-2005, 02:44 PM Since we know GM won’t use the CV6 production platform under the NAIAS concept...... Does anyone think they may use the current GTO's? In my eyes the concept we've seen would fit the general proportions of the production GTO. Any thoughts? CZ6. And my bet is that the chassis under the conept doesn't matter but still I think Kappa components will be used. 94Camaro_Z_28 12-08-2005, 02:48 PM ^I agree...though I'm not sure why.... dfmoeller 12-08-2005, 07:51 PM They publicly announced last week already that they would be showing a Camaro concept built on a stretched Kappa. Pay attention, please! Reds been telling us for months not to pay any attention to the concept platform, its merely a mule to show the body on. The real question is, "what, exactly, are those CAD drawings showing"? stars1010 12-08-2005, 07:57 PM They publicly announced last week already that they would be showing a Camaro concept built on a stretched Kappa. Pay attention, please! Reds been telling us for months not to pay any attention to the concept platform, its merely a mule to show the body on. The real question is, "what, exactly, are those CAD drawings showing"? :rolleyes: MEEEE? Pay attention? Wow....and who are you again? Why dont you go read post #18 in this thread from...."last week"....:rolleyes: http://64.65.63.61/forums/showthread.php?t=411289 The CAD drawing are Sigma-lite, which from what I know is a mix of Zeta and Sigma.... :Owned: anything else I need to pay attention to? geeez..... 30thZ286speed 12-08-2005, 09:29 PM :rolleyes: MEEEE? Pay attention? Wow....and who are you again? Why dont you go read post #18 in this thread from...."last week"....:rolleyes: http://64.65.63.61/forums/showthread.php?t=411289 The CAD drawing are Sigma-lite, which from what I know is a mix of Zeta and Sigma.... :Owned: anything else I need to pay attention to? geeez..... LOL.......Its already happening......Stars we are going to have a few months of this and its only going to get worse. :Owned: This smilely is going to get a workout around here. 30thZ286speed 12-08-2005, 09:31 PM I saw a illustration of some rear suspension components that looked like Kappa componets, but I don't know what they were from. I've been going through way too many threads the last couple of days. stars1010 12-08-2005, 09:57 PM LOL.......Its already happening......Stars we are going to have a few months of this and its only going to get worse. :Owned: This smilely is going to get a workout around here. :D Yup, I'm so not looking forward to everybody and their brother coming in here and telling us regulars how its ganna be.... Capn Pete 12-08-2005, 10:38 PM You must have missed this thread (http://web.camaross.com/forums/showthread.php?t=414380) then?;) It shows a couple pics underneath the CTS. The rear looks IDENTICAL to the Camaro chassis:thumb:. The front is a little different I think?:think: I think that's where the "sigma-lite" is coming from?:confused: Or shall I say, "zegma"??:D RussStang 12-08-2005, 10:48 PM :D Yup, I'm so not looking forward to everybody and their brother coming in here and telling us regulars how its ganna be.... Boy, won't that be a blast. stars1010 12-09-2005, 12:02 AM Ok for those of you who didn’t read my first post….. I’M TALKING ABOUT THE CONCEPT NOT THE PRODUCTION CAR I know the PRODUCTION CAR will use sigma-lite, I was one of the first here to say it when the CV6 tech drawings were posted this week. I’m talking about the NAIAS concept…… I’m thinking the current GTO may be used, Its in production, Its about the right size to fit the concept around it, It has all the right hardware in it already…. Geez its just a theory, stars1010 12-09-2005, 12:03 AM You must have missed this thread (http://web.camaross.com/forums/showthread.php?t=414380) then?;) It shows a couple pics underneath the CTS. The rear looks IDENTICAL to the Camaro chassis:thumb:. The front is a little different I think?:think: I think that's where the "sigma-lite" is coming from?:confused: Or shall I say, "zegma"??:D Why dont you go check out who posted the CTS-v pics:rolleyes: I for the life of me cant find a undercarrage pic of a CTS , SRX or STS . I did however find one of a GTO . Not tooo many similarities goin on there . Go re-read my first post in this thread....I'm not talking about the production car:mad: Since we know GM won’t use the CV6 production platform under the NAIAS concept...... Does anyone think they may use the current GTO's? In my eyes the concept we've seen would fit the general proportions of the production GTO. Any thoughts? guesswhoo 12-09-2005, 05:34 AM Sounds like the upcoming Camaro will have IRS problems like the CTSv does. :lol: Capn Pete 12-09-2005, 10:57 AM Why dont you go check out who posted the CTS-v pics:rolleyes: I KNOW you posted them! ;) I for the life of me cant find a undercarrage pic of a CTS , SRX or STS . I did however find one of a GTO . I posted the link to your other thread for his benefit :thumb:. :cool: Big Als Z 12-09-2005, 11:58 AM If it runs or moves, maybe some sort of crazy Kappa construction. If its turntable only model, tube steel and jack stands....like the picutres!! :lol: stars1010 12-09-2005, 03:11 PM I KNOW you posted them! ;) I posted the link to your other thread for his benefit :thumb:. :cool: oooooh, I thought that post was aimed towards me..... sorry:D | ||