FS or Trade: Show and go Formula.

Performin Norman
10-22-2005, 09:25 AM
http://performin.homeip.net/images/formula/100_5658.jpg
http://performin.homeip.net/images/formula/engine.jpg
ENGINE:
414 cu inches
Cola 4" stroke crank
Lunati Pro-mod rods
JE flat top pistons
Total Seal moly rings
Comp Cams solid roller
AFR 220 ported heads
Ported and Extrude honed manifold
BBk 58mm throttlebody
NX direct port fogger adjustable from 200-600hp w/ digital .......progressive controller

SUSPENSION:
BMR Xtreme torque arm
BMR Xtreme sway bar
BMR K-member
BMR Xtreme control arms
BMR A-arms
Hotchkis panhard rod, and strut brace

CHASSIS/DRIVELINE:
Moser 9" with 3.89 gears
Racermaker's 8-point cage and Sub Frame Connectors

I will sell this car for $12,000 and would consider trades on just about anything of value between 12 and 15k. I would consider a nice modern muscle car, a classic car or a very nice driver. Yes, I'd even consider economy cars such as a Honda Accord or equivalent.

Interested? Email me at Nmah@kc.rr.com and put Formula in the subject line. Yes I have more pictures available or can shoot just the right one if you wish.

Thanks!

BMoney
10-22-2005, 11:06 PM
would you be interested in trading for a 79 malibu show/strip car. its real fast mid 10's on motor and mid 9's on 200 shot. car is in perfect condition, new viper red paint. i have a ad on racingjunk.com #512100. check it out and let me know thanks Brian

jamilz28
10-22-2005, 11:11 PM
Thats too much power, You should give it too me

Performin Norman
10-23-2005, 10:16 AM
would you be interested in trading for a 79 malibu show/strip car. its real fast mid 10's on motor and mid 9's on 200 shot. car is in perfect condition, new viper red paint. i have a ad on racingjunk.com #512100. check it out and let me know thanks Brian

Thanks so much for the offer. I'm not really interested in that car. If you had something a little more tame, I'd prefer it. I already have another project car and really only like to have one at a time.

Thanks again.

MikeyG
11-02-2005, 12:40 PM
A4 or M6?

Performin Norman
11-02-2005, 01:11 PM
A4 or M6?

M6. I have a sale pending but if you need more info, just let me know.