MustangEater82 10-16-2005, 12:05 AM anyone want to come over and help pull a transmission, clutch and flywheel? also going to be putting a rear in.
Already have old rear out, brakes swapped over, drivesahft out.
Free beer, if you need it, I'll throw in some hard alcohol.
East orlando area avalon park. Post up if interested, I got at least one guy coming, maybe a few others.
louvit 10-16-2005, 06:43 AM I would but it a little far for me on a Sunday..lol I have the same job to do here.. clutch ds and loop and rear...lol
darkoverlift 10-16-2005, 09:31 PM back in town monday let me know if you need help next week.
spongebobrulz 10-18-2005, 01:13 AM so did you get your tranny out eric?
MustangEater82 10-18-2005, 02:07 AM for the most part rear swap is done...
tranny is out, I already pulled belhousing put in new clutch slave and reinstalled bellhousing.
Right now I am debating on the rear main seal, and I think I am screwed on the flywheel. Might have to order a new one, oddly enough GM seems to be the cheapest.
no finger prints on the flywheel, its been wiped down.
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20163.jpg
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20162.jpg
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20161.jpg
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20160.jpg
I still need to do my poly torque arm bushing, but what I mainly will need help with is putting hte tranny back in the car, other odds and ends I can take care of easily.
MustangEater82 10-18-2005, 02:12 AM yeeehaww....
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20085.jpg
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20102.jpg
http://www.porteighty.biz/uploads/Big%20fix%20on%20car%20166.jpg
Joe 1320 10-18-2005, 06:32 AM Right now I am debating on the rear main seal, and I think I am screwed on the flywheel. Might have to order a new one, oddly enough GM seems to be the cheapest.
.
How many miles?
MustangEater82 10-18-2005, 11:21 AM ~52k
Kwiksilverz28 10-18-2005, 06:55 PM Don't bother. You will fry another clutch in the future. You can do it then...
How much is the flywheel? That one is probably turnable. Looks a little hot spots.....
What did you do to the rear end?
Joe 1320 10-18-2005, 07:09 PM Don't bother. You will fry another clutch in the future. You can do it then...
How much is the flywheel? That one is probably turnable. Looks a little hot spots.....
lol, sorry Eric.... but I have to agree.
MustangEater82 10-18-2005, 07:09 PM Don't bother. You will fry another clutch in the future. You can do it then...
How much is the flywheel? That one is probably turnable. Looks a little hot spots.....
What did you do to the rear end?
nothing my rear is fine.
jsut got a deal on a '02 rear with an auburn and 3.42s. gonna try it out, if its good and helps me, then I will part out my rear, or sell it.
I got my 3.42 rear local for $120, I can sell my diff as is on a v6 board for $150 no problem.
as for the flywheel, looking at it, not going to trust resurfacing it. I just bought a new one. It looks worse then the pic suggests. I also decided not to swap the rear main seal.
MustangEater82 10-18-2005, 07:12 PM lol, sorry Eric.... but I have to agree.
hehe don't worry thought the same.
BTW in my half defense I have had hydraulic problems for awhile with this car. but all my hydraulics have been updated to the new 01-02 style.
86 IROC 10-18-2005, 07:34 PM Eric, did your car have 3.23's or 3.42's stock? Will it be ready to run tomorrow night? I'll be at OSW, w/o my car though... still broken. :rolleyes:
Look for a Silver 05' GTO if you go... I'll be around that car.
MustangEater82 10-18-2005, 08:54 PM Eric, did your car have 3.23's or 3.42's stock? Will it be ready to run tomorrow night? I'll be at OSW, w/o my car though... still broken. :rolleyes:
Look for a Silver 05' GTO if you go... I'll be around that car.
I had 3.23s stock.
no way it will be ready, I think it woudl be a small miracle and a full day of work to get it on the road tomorrow, and I have am giong to put a Spec II in, need to break it in first.
86 IROC 10-18-2005, 09:08 PM Bummer man, was hoping to see you get some clean passes in. Hope the new set up works out for you. My crap will be down until at least next spring... the money just ain't comming in fast enough. :(
Joe 1320 10-19-2005, 12:54 AM Eric, not to hijack the thread, but what gears were stock in your old 94? I've swapped around a few times and can't even remember.
MustangEater82 10-19-2005, 01:42 AM Eric, not to hijack the thread, but what gears were stock in your old 94? I've swapped around a few times and can't even remember.
When I sold it to you it had 3.42s in it(direct rear swap out of a 97 Ws6)
Factory car came with 3.23s
all v6 5-speed f-bodies came with 3.23s
all 3.4Ls came with 3.23s
most 3.8L a4 v6 f-bodies got 3.08s
some 3.8L a4 v6 f-bodies got 3.42s(and most of those generally had LSD)
Joe 1320 10-21-2005, 06:37 PM )
Factory car came with 3.23s
Gracias!
|
|