What 60 foot time, 1/8 MPH and 1/4 Mile Trap Speed to you need to run a 12.99?
What 60 foot time, 1/8 MPH and 1/4 Mile Trap Speed to you need to run a 12.99?
Looking for some numbers. What is a good guide to get me into that 12.99 I so desperatly seek?
60 Foot?
1/8 mile?
1/4 Mile Trap Speed?
I was thinking a 1.9 60 Foot with a trap speed over 105MPH? Is that about right?
60 Foot?
1/8 mile?
1/4 Mile Trap Speed?
I was thinking a 1.9 60 Foot with a trap speed over 105MPH? Is that about right?
I am close myself, see sig. I would need to pull
a 1.83 in the 60 to get into the 12's with a 104
trap speed. Your first estimate is very close;
1.9's 60 ft with 105 trap.
The trap speed in my case is with a manual tranny.
a 1.83 in the 60 to get into the 12's with a 104
trap speed. Your first estimate is very close;
1.9's 60 ft with 105 trap.
The trap speed in my case is with a manual tranny.
Last edited by 84305HO; Oct 31, 2002 at 11:33 AM.
I'd say you wouldn't necessarilly need a 1.90 60' for a 12 second pass, but it would help, I think w/higher MPH it's safe to say 105-106 is the norm for a 13-flat to a 12.85. There's always exceptions though. For the 1/8th, probably 8.25-8.35, traction off the line being the big factor.
I've run a 12.93 @ only 102.5 mph but that was into a strong headwind on a 1.68 60 foot. If you can hit 103.5 mph with a high stall torque converter and E/T streets I'd say you could get a 12.99. Keep in mind you'll lose mph with the installation of a high stall torque converter and slicks so your car will probably be need to be pulling 105 mph trap speeds before the install.
Originally posted by Kreinmc
Hmmm looks like i might need to trap 115mph to make it into the 12's lol.
Hmmm looks like i might need to trap 115mph to make it into the 12's lol.
No disrespect intended. A while back I raced an LS1 SS Camaro that was running 12.9s at 114-115mph with about 2.1 60ft times. Is ET vs MPH affected by track elevation and ambient temp?
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM



