1995 Z28 6spd convertible (project)
Thread Starter
Registered User
Joined: Jan 1999
Posts: 3,051
From: Rochester, NY USA
1995 Z28 6spd convertible (project)
1995 Z28 convertible, M6. Teal exterior, dk.grey cloth (out of a 98) interior, black top (good shape), power windows, power locks, cruise, 108k miles on the body, 60k on engine. Paint/body is in good shape with only a couple minor imperfections, never wrecked. The engine bay was just painted black (professionally). The car has BMR subframe connectors welded in, 4.10 gears, 255lph inline pump. Florida car until last year, so zero rust anywhere. Its a nice car
The car does not have a transmission, hydraulics, or starter. It does come with the bellhousing, driveshaft, and a clutch w/flywheel. The engine/wiring/PCM is all there and hooked up. Motor ran perfect last fall. $800-1000 will get you up and running. Books for $6500-7500.
$2900
jhsformula@aol.com
Thanks, Jason
The car does not have a transmission, hydraulics, or starter. It does come with the bellhousing, driveshaft, and a clutch w/flywheel. The engine/wiring/PCM is all there and hooked up. Motor ran perfect last fall. $800-1000 will get you up and running. Books for $6500-7500.
$2900
jhsformula@aol.com
Thanks, Jason
Registered User
Joined: Jun 2000
Posts: 2,413
From: Marlton NJ
Re: 1995 Z28 6spd convertible (project)
pics to blue89bird@aol.com please.
Just to verify, with a new starter, tranny, and hydraulic lines ONLY this will be a running/driving car?
Just to verify, with a new starter, tranny, and hydraulic lines ONLY this will be a running/driving car?
Thread
Thread Starter
Forum
Replies
Last Post
Garcia5
General 1967-2002 F-Body Tech
15
Jul 7, 2022 06:51 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM