TrouserSnake 06-19-2005, 06:51 PM I ran one 12.9 missing third gear my mph was 111.
My Run that everything went perfect except for Traction looked like this
R/T ... 1.034
60 ... 2.314
330 ... 6.158
1/8 ... 9.007
mph ... 87.20
1000 ... 11.408
1/4 ... 13.399
mph ... 114.47
This was third Run Hot lapping it the temp was 81* in stanton..
mavricki18 06-19-2005, 08:41 PM with good 60ft time 1.8 or so you should be deep in to the 12s. I have had enough with my crappy 60ft times. 2.0 being my best ever. Im gitting a 4.10 with T/A cover, pro stars with big oll mickey thompson street radials, LCAs and some other goodies to make the damn thing stick.
stereomandan 06-19-2005, 10:48 PM Dang, you need traction bad. Can't wait to see how you do once you can hook.
Dan
IrocSS85 06-19-2005, 11:41 PM Im gonna guess 12.5's at about 115mph on a good pass. but clearly theres tons of room for improvement with better air and some good traction. what are you shifting at? curious with that cam cause I just helped a buddy put that same cam in. and its time for a 4.10 huh?
chris
TrouserSnake 06-20-2005, 09:14 AM Im not sure Where im shifting at im thinking about 6400 or 6500..
When I hit the Rev limiter As soon as I go through the Traps at the top of 3rd
QUASAR BLU 06-20-2005, 10:05 AM still in 3rd? you got a 3.42 in that, or neumerically smaller (like 3.23?)
00Z28SS 06-20-2005, 04:51 PM 114 is a mid 12 trap. What a beast. Can't wait for the stickys to be on there and see what she really runs. :cool:
Bill'sWS6 06-20-2005, 07:19 PM 114 is a mid 12 trap. What a beast. Can't wait for the stickys to be on there and see what she really runs. :cool:
I guess it all depends on the car. My car trapped at 110Mph and I ran a 12.3 with a 1.8? sixty time.
Bill
one wicked element 06-20-2005, 08:07 PM I guess it all depends on the car. My car trapped at 110Mph and I ran a 12.3 with a 1.8? sixty time.
Bill
I ran 110mph at 13.6 in my old Z. :(
No traction.
AL SS590 M6 06-21-2005, 09:20 PM I ran 110mph at 13.6 in my old Z. :(
No traction.
And I ran a 12.15 when I was running 110mph. I cheat though. Auto with a converter. :D
CamaroChic5 06-21-2005, 09:36 PM I've ran an 11.84 @ 110mph.
Bill'sWS6 06-21-2005, 11:01 PM I've ran an 11.84 @ 110mph.
Holy Crap, 11.80's at 110Mph.
It has to be an auto with a huge converter, right.
Do give details on the car.
Thanks,
Bill
Bill'sWS6 06-21-2005, 11:05 PM And I ran a 12.15 when I was running 110mph. I cheat though. Auto with a converter. :D
Hey Al,
11.40's now............ Nice. What size converter are you running. What tires?
I am looking at upgrading my 2800 converter. I did my 12.3 @ 110Mph with a 1.85 60' at Milan on Eagle F1's. I have a new set of 275/40/17 Nitto Drag radials going on the car Saturday. I hope with going to a 3600-3800 converter and Nittos I can get the car down to a 1.6? 60' time and get the car into the high 11's.
Later,
Bill
mavricki18 06-22-2005, 03:04 AM What kinda ETs should i be running at 113?
00Z28SS 06-22-2005, 05:30 PM I think your 12.627 sounds about right.
CamaroChic5 06-22-2005, 06:12 PM Holy Crap, 11.80's at 110Mph.
It has to be an auto with a huge converter, right.
Do give details on the car.
Thanks,
Bill
Grand National..:) Its got a 3200 stall.
AL SS590 M6 06-23-2005, 12:46 AM Hey Al, 11.40's now............ Nice. What size converter are you running. What tires?
I am looking at upgrading my 2800 converter. I did my 12.3 @ 110Mph with a 1.85 60' at Milan on Eagle F1's. I have a new set of 275/40/17 Nitto Drag radials going on the car Saturday. I hope with going to a 3600-3800 converter and Nittos I can get the car down to a 1.6? 60' time and get the car into the high 11's. Bill
Actually I haven't updated my sig lately. New best is a 11.299 @ 118.59 on a 1.501 sixty foot. Race weight is still 3525 lbs.
Yank pro thruster 4400, 4.10 gears, spool, 26-11.50x16 ET streets.
A good 3800-4200 converter will over power the Nittos. I'd try the new MT ET street radials if I wanted to drive to the track.
AL SS590 M6 06-23-2005, 12:48 AM What kinda ETs should i be running at 113?
What gears and rear do you have? What's the race weight?
mavricki18 06-23-2005, 01:07 AM What gears and rear do you have? What's the race weight?
stock 10 bolt,3.42s for now (I am going with a 4.10 very soon) i dorve on the scales at 131 one time with about no gas and me in the car and it said 3400 but that seems a little on the light side.?
AL SS590 M6 06-24-2005, 12:35 AM stock 10 bolt,3.42s for now (I am going with a 4.10 very soon) i dorve on the scales at 131 one time with about no gas and me in the car and it said 3400 but that seems a little on the light side.?
You're about as far as you will get 'till you go 12 bolt and sticky tires so that you can launch hard.
mavricki18 06-24-2005, 04:21 AM 1bad86Z (Scott K) is about to put a 4.10 with solid crush sleeve and maybe ill get a TA cover in the near future and hopefully that will make it a little stronger. I have a deal with a guy to trade my BFG DRs for a set of MT streets 26/ 11.5/16s and than maybe i can launch better than a 2.XX 60 ft time.
AL SS590 M6 06-26-2005, 09:28 AM 1bad86Z (Scott K) is I have a deal with a guy to trade my BFG DRs for a set of MT streets 26/ 11.5/16s and than maybe i can launch better than a 2.XX 60 ft time.
Keep them at 21-22 psi so that they can spin a tiny little bit. Might save you rear so to speak :)
|