|
||
1993 6speed swapJKDZ28 05-08-2005, 04:54 PM i have a 1993 z28 with the 4L60 automatic tranny... i just did the M6 swap my speedo doesn't work now, what do i need to do in order for it to work? the 6speed came out of a 1997 Z28 MEAN LT1 05-08-2005, 05:21 PM i have a 1993 z28 with the 4L60 automatic tranny... i just did the M6 swap my speedo doesn't work now, what do i need to do in order for it to work? the 6speed came out of a 1997 Z28 You need to cut and splice a Vehicle speed sensor to the tranny. Thats why your speedo isnt working. Mines isnt working either b/c I havent spliced mine yet. BTW that pig tail is like 40 bucks. JKDZ28 05-08-2005, 07:56 PM You need to cut and splice a Vehicle speed sensor to the tranny. Thats why your speedo isnt working. Mines isnt working either b/c I havent spliced mine yet. BTW that pig tail is like 40 bucks. MAN 40$ for a pigtail :) is there a writeup on how to perform this? jay_lt4 05-08-2005, 08:00 PM you will also need your prom burned for the new trans, the auto trans have 40 pulses per revolution of the drive shaft, the manual trans have 17 pulses JKDZ28 05-08-2005, 08:22 PM and this leads to another problem after sitting for nearly a year and doing the conversion my car has developed a miss... the idle surges and doesn't act right, i have a COMPLETE loss of power, like its missing 100 horse could this be because of the tuning... i had this done by PCMforLESS the car is running pig rich now also | ||