DarkHorse
04-28-2005, 04:37 PM
Headed out to the track yesterday with my cousin and speed2much - unfortunately the track was closed so we headed back. On the way Speed2much and I decided to go from a roll.
From 50mph we hit it - Lou says he left early but it wouldn't have mattered anyway - he pulled a car at first and from there it was a steady pull away from me till about 110mph.
Killed
I'm running 12.3-12.4 @110/111 and Lou has run a 13.0@113 on street tires. He's got a full bolt on Z with LE2 head/cam package. Car runs good - real good IMO.
He's got a mover that's for sure. I'm sure he'll hit low 12's maybe 11's with some DR's on it.
Here's his mods:
LE2 Ported and Polished Heads/Cam
Ported and Polished Manifold
SLP CAI
Vortec Metal Elbow
58MM TB
38# Injectors
Beehive Springs
Hyd. Roller Lifters
Comp R 1.6 Rocker Arms
Chromoly Pushrods
Double Roller Timing Chain
Pacesetter Long Tubes/Y-Pipe
(no cats)
Hooker exhaust System
3.73's
4000 Stall
TransGo Shift Kit
Electric Water Pump
ODB1 Conversion
Subframe Connectors
From 50mph we hit it - Lou says he left early but it wouldn't have mattered anyway - he pulled a car at first and from there it was a steady pull away from me till about 110mph.
Killed
I'm running 12.3-12.4 @110/111 and Lou has run a 13.0@113 on street tires. He's got a full bolt on Z with LE2 head/cam package. Car runs good - real good IMO.
He's got a mover that's for sure. I'm sure he'll hit low 12's maybe 11's with some DR's on it.
Here's his mods:
LE2 Ported and Polished Heads/Cam
Ported and Polished Manifold
SLP CAI
Vortec Metal Elbow
58MM TB
38# Injectors
Beehive Springs
Hyd. Roller Lifters
Comp R 1.6 Rocker Arms
Chromoly Pushrods
Double Roller Timing Chain
Pacesetter Long Tubes/Y-Pipe
(no cats)
Hooker exhaust System
3.73's
4000 Stall
TransGo Shift Kit
Electric Water Pump
ODB1 Conversion
Subframe Connectors