steves
04-27-2005, 12:36 AM
Sorry if repost.
http://www.cobaltss.net/forums/showthread.php?t=535
http://www.cobaltss.net/forums/showthread.php?t=535
|
||
Cobalt SS Dyno #'ssteves 04-27-2005, 12:36 AM Sorry if repost. http://www.cobaltss.net/forums/showthread.php?t=535 Z284ever 04-27-2005, 12:49 AM Cobalt SS is a really fun and cool car. BTW, I'm told by a good source that the ECM programming restricts engine power. The very same engine, with less conservative ECM gets 245 hp. Why? Powertrain hasn't yet certified it's durability at that power level. steves 04-27-2005, 12:56 AM Cobalt SS is a really fun and cool car. BTW, I'm told by a good source that the ECM programming restricts engine power. The very same engine, with less conservative ECM gets 245 hp. Why? Powertrain hasn't yet certified it's durability at that power level. Doesn't an SRT-4 have 230hp. If I was a kid with a Cobalt SS I'd want the bragging rights. I forgot if it makes sense do the opposite. :rolleyes: Pandamonkey 04-27-2005, 01:00 AM Nice..........really close the quoted hp..... morb|d 04-27-2005, 01:52 AM OMG look at that torque curve!!! it's hardly even below peak level at redline! at that rate, the HP still has plenty of room to GROW for another 500rpm before even starting to slightly drop off. If that Ecotec could reliably rev to about 8 grand it would be unstoppable. It's almost scary how much untapped potential there is there. I can't even imagine how things would look with a good turbo setup. IF (big if) GM were inclined to go after the EVO/WRX market they could hit like a huge meteor. an entrance worthy of the world's #1 automaker. Then again.... forget it, I'm going to hold the cynicism this time. AWESOME news. 90 Z28SS 04-27-2005, 02:42 AM This car is looking to be my new daily driver more and more everyday , hmmmmmm . Nice stock #'s , even nicer un-stock potential :D If they eeeeeeeeever get to northern Indiana I will have to go drive one . indieaz 04-27-2005, 02:48 AM I find it funny how the one guy in that thread states how torque and HP should always be equal at 5252 RPMs then the guy "Tiny" chimes in thinking he knows what he's talking about and says "No, that depends ont he car :lol: " - what a tool. At any rate, i'm liking this cobalt SS more and more every day as a daily driver. It will be on my shopping list when i finish up school and am int he market for a new car. morb|d 04-27-2005, 03:22 AM I find it funny how the one guy in that thread states how torque and HP should always be equal at 5252 RPMs then the guy "Tiny" chimes in thinking he knows what he's talking about and says "No, that depends ont he car :lol: " - what a tool. At any rate, i'm liking this cobalt SS more and more every day as a daily driver. It will be on my shopping list when i finish up school and am int he market for a new car. seriously. it took them 2 pages to figure out the torque and HP curves aren't graphed on the same scale. PacerX 04-27-2005, 07:57 AM seriously. it took them 2 pages to figure out the torque and HP curves aren't graphed on the same scale. Someday, when you're really bored, we'll talk about senior management types and Finite Element Analysis presentations... "Oh GOD! It's red! We've got a hot spot! Oh NOOOOO!" "Erm, Mr. Vice President of Engineering guy with the multiple degrees from the University of Michigan... you might want to look at the color scale on the left of the page." 96_Camaro_B4C 04-27-2005, 08:11 AM Someday, when you're really bored, we'll talk about senior management types and Finite Element Analysis presentations... "Oh GOD! It's red! We've got a hot spot! Oh NOOOOO!" "Erm, Mr. Vice President of Engineering guy with the multiple degrees from the University of Michigan... you might want to look at the color scale on the left of the page."Bahahahahaha!! :lol: PacerX 04-27-2005, 08:22 AM Bahahahahaha!! :lol: Every once in a while you have one of those: "I Can't Believe Someone this Stupid Became a Vice President" moments in meetings. I had a Director of Quality ask me how a go/no-go pin on a gage works once. It was all I could do not burst into a laughing fit of the first magnitude. 90 Z28SS 04-27-2005, 02:40 PM Every once in a while you have one of those: "I Can't Believe Someone this Stupid Became a Vice President" moments in meetings. I had a Director of Quality ask me how a go/no-go pin on a gage works once. It was all I could do not burst into a laughing fit of the first magnitude. My QA inspecter routinely asks me if my parts are ok , Im like uhhhhhhh :D :D ProjectRS 04-30-2005, 09:21 PM I can't wait to get my SS. Oh the fun we'll have this summer :cool: | ||