Fire bird Trans Am
I have some interior plastic froma 98 for sale...
2 C pannels
2 rear side pannels
Speaker covers
Stock Front springs
Stock upper A arms
Driver side lower A arm
Stock Rear springs
Rear shocks
2 sets of Stock Rear lower control arms.
LS1 brake kit. 2 spindals 2 rotors 2 calipers 2 brake lines one brake hose bolt.
1 Stock Insterment cluster(guages)
1 grey insterment cover with vent
1 black dash with red alarm light.
electric Trunk release
Glove box
Gas tank heat shields
windshield washer fluid tank
Rear Trunk speaker pannels
Jack
spare tire for LT1 brakes.
Master brake cylinder
Brake booster
Pedal assembly for A4.
rear spring seats
Stock LS1 intake without filter. (Plastic lid. IAT sensor installed. NO MAF.)
1 hood support strut
1 ABS unit
2 front Hubs with ABS sensors
Rear bumper cover. Black with grey race stripes
Rear crush zone plastic piece.
Fuel vapor canister.

LT1
-----CHEAP...---------------------------
exhaust I pipe
single cat Y pipe
muffler and tail assembly No tips
--------------------------------------------
LT1
valve covers, center bolt
Radiator with tranny cooler A4
Stock Torque converter
Crank
Rods
pistons
metal cooling line assembly for Heater core. Rubber can be replaced and clamped.
Head coolant line. connects head in back of motor
Stock Front springs
95 Tail lights (rectangle boxes not honeycomb)

Hopefully more to come. Please make offer with shipping inmind to FL 32547

 

How much would you be askin' for the passenger side rear tailight assembly? Mine's cracked pretty bad, and thanx!

 

what kind of shape are the "LS1 brake kit. 2 spindals 2 rotors 2 calipers 2 brake lines one brake hose bolt" in. How much before shipping? Email me at joebellman@yahoo.com Thanks

 

how much for the back bumper? will you ship to tx

 

By 2 front hubs are you referring to this piece?

Picture

If so I need those, I sent you an email as well.