Okay, I am selling a brand new, never installed BMR Trak Pak. The torque-arm is black as well as the cross brace. Has all necessary hardware. I was selling this a while ago, and it kinda fizzled over the winter, but I am gonna resurrect it as I need to get rid of it.

I took some pics of it, and you can see them here:
http://www.phantomss.com/forsale/
(I also have the hardware kit, but that is not shown in the pic.)

As you can see, the angle finder is still attached in the arm the way it came shipped to me. It is that new, the only thing I did was take it out of the box, looked at it and said "Neat!". I can even supply the original boxes. This is just as new as what you would get anywhere else. This currently costs around $380 not including shipping, looking to get $325 locally. Willing to drive to meet someone withing reasonable distance from Detroit area if necessary.

I hate to do this but since my car is lowered and isn't going to see hardly any track use, it is time to move it out and get a regular trans-mount version to ensure my ground clearance.

Speak up if you want it!

 

Jason, I'm interested, I'll PM you

 

I have my PMs turned off...e-mail me!

 

I realised that and did e-mail you

 

Didn't get it. Did you send to jason@camaroz28.com?

 

Hmmmm, I'll send it again.

 

Got both...must have been a delay in the system. I fired back a reply, please keep me posted!

 

Sent ya one back.....hopefully you get it.

 

Sold!

 

question: If you are getting heads/cam and NX why isn't your car gonna see much track use? I would be itching to get to the track every opportunity I got. Is it gonna be more of a street cruiser/show car?

 

Correct. My car won't be much of a track car but is more for street/show. The heads/cam will put me into 400rwhp+ and the NX will be just for fun now and then. I don't know if I will see 11.0s anytime soon or at least not very often, and that is what the standard torque arm is rated to (limitation of the trans tailshaft where it mounts, not the limitation of the torque arm). If I need to, BMR just came out with a trans brace that let's you move the torque arm mounting point off the trans and onto the brace.

 

Now I know what Brett's other parts are.......

Can you wait until the 28th of May? We might be able to help you out earlier too.

Roman

 

I don't mind holding it until then, as long as Brett doesn't need it sooner. I will be having one of my "basement meetings" on the 28th, and I expect the usual gang to attend. I am not sure if I told Taner about it yet, but I will soon and you are more than welcome to be a part of it. Looks like you might be here that day anyway!

 

Thanks for the invite, but the 28 th of May is the grand opening of our business.

But you are more than welcome over here too.


Roman

 

I guess that means Taner won't be making it.

Perhaps I should reschedule mine, I wouldn't want to miss the big opening.