Didn't know this would work

I put a ODBI pcm into a 97 TA :eek: Car picked up 2mph at the track,

Car ran like a champ after i tuned the WOT, VE, and Misc,(EGR,EVAP,KNOCK)

PCM plugged right in, tuned it with tuner cat and a ODBII cable from AKM.

The old ODBII pcm was too rich, is was programmed for a cc306 with ported heads, which are not on the car yet. So to lean it out we just plugged in an old pcm out of a 94 auto Z. I leaned it out and the TA ran faster, not a bad quick fix :cool:

Sure does work but keep in mind you either have to put in an OBD1 knock sensor or add the resistor in the PCM to make it work....

NO i am saying that it did work and the car picked up two mph at the track.

I turned off all knock pull, so i dont have to have a resistor.

I wouldn't recomend trying this but just FYI it does work.