FS: LT1 396 all Forged Rotating assembly/pistons/rods
Thread Starter
Registered User
Joined: Dec 2003
Posts: 81
FS: LT1 396 all Forged Rotating assembly/pistons/rods
Lunati Forged 396 racer series Crank,
Lunati Forged 6.0" pro mod rods
Lunati Forged 4032 flattop pistons.
Crank has been balanced.
Asking $1500US.
Also selling 4 polished Firehawk wheels (98+ version)
Four 275/40/17 tires mounted and balanced included, center caps, lugnuts.
asking
$850 US
Lunati Forged 6.0" pro mod rods
Lunati Forged 4032 flattop pistons.
Crank has been balanced.
Asking $1500US.
Also selling 4 polished Firehawk wheels (98+ version)
Four 275/40/17 tires mounted and balanced included, center caps, lugnuts.
asking
$850 US
Thread Starter
Registered User
Joined: Dec 2003
Posts: 81
Re: FS: LT1 396 all Forged Rotating assembly/pistons/rods
Jazen93z.
The rotating assembly is used, but it is in "like new" state.
I can supply the main and rod bearings used so that you can see it has not been abused.
93 4mula,
I want to sell as a complete set but if not sold in a few weeks I may consider selling without the pistons, but I can't reduce the price much to remove them.
What would you be willing to pay without pistons?
You would have rebalancing costs if using another piston also so consider that as well in you rebuild costs.
race24x
I was in Portland Maine last weekend, too bad I didn't know, I could have got them reasonably close ot you. I'm a 6-7 hour drive from Portland.
I would have to ship them to you unless you want to drive and pick em up. The cost is about $150US but I could go half on shipping for these wheels.
The wheels are the same design as the wheels on this firehawk
http://www.nofearmotorsports.com/ind...ar_page&id=135
The rotating assembly is used, but it is in "like new" state.
I can supply the main and rod bearings used so that you can see it has not been abused.
93 4mula,
I want to sell as a complete set but if not sold in a few weeks I may consider selling without the pistons, but I can't reduce the price much to remove them.
What would you be willing to pay without pistons?
You would have rebalancing costs if using another piston also so consider that as well in you rebuild costs.
race24x
I was in Portland Maine last weekend, too bad I didn't know, I could have got them reasonably close ot you. I'm a 6-7 hour drive from Portland.
I would have to ship them to you unless you want to drive and pick em up. The cost is about $150US but I could go half on shipping for these wheels.
The wheels are the same design as the wheels on this firehawk
http://www.nofearmotorsports.com/ind...ar_page&id=135
Registered User
Joined: Dec 2003
Posts: 484
Re: FS: LT1 396 all Forged Rotating assembly/pistons/rods
very interested in the rotating assembly. do you have pics of it? LT1TA1994@aol.com What compression are the pistons set up for?
Thread Starter
Registered User
Joined: Dec 2003
Posts: 81
Re: FS: LT1 396 all Forged Rotating assembly/pistons/rods
Serge805,
Seems to be about $105US. for shipping
94ta_Lt1,
the pistons have -3cc valve reliefs. You compression will be based on what your chamber volume is. You have some adjustment here if your willing to grind out either the piston or chamber, gasket thickness, ect.
I'll work on some pics for later tonight.
Seems to be about $105US. for shipping
94ta_Lt1,
the pistons have -3cc valve reliefs. You compression will be based on what your chamber volume is. You have some adjustment here if your willing to grind out either the piston or chamber, gasket thickness, ect.
I'll work on some pics for later tonight.
Registered User
Joined: Mar 2002
Posts: 595
From: Missouri
Registered User
Joined: Nov 2003
Posts: 11