PNYKILR
03-01-2005, 11:19 AM
I'm from Albuquerque New Mexico. Track elevation is 5,300'. DA on Sunday was right at 6,000'. Best pass of the day was 11.33@122mph on a 1.58 60'. Corrected for Sea Level it came in at 10.41@131mph. I'll never find that out though as I'll never be down at a sea level track.
Motor still needs to break-in. I took it out there with about 5 miles on it plus it still needs more tunning on the FAST.
Break down of the motor is:
398 LT1
13.1 compression
Callies 3.875 crank
Oliver Billet 6" Rods
Ross .040 over pistons
Custom Joe Overton Solid Roller Cam
Victory JR EFI intake
Acufab 2100cfm TB
FAST
Everything from BMR is under the car
Currie 9" with 4.56's
On the Dyno it made SAE 500.4RWHP & 456.1RWTQ. Uncorrected for our elevation it made 413RWHP & 376RWTQ.
Here's a picutre for everyone. Yea for me. :D
http://www.abqdragway.com/spgm/gal/Gr_02_27_05/ts_6075.jpg
Neal
Motor still needs to break-in. I took it out there with about 5 miles on it plus it still needs more tunning on the FAST.
Break down of the motor is:
398 LT1
13.1 compression
Callies 3.875 crank
Oliver Billet 6" Rods
Ross .040 over pistons
Custom Joe Overton Solid Roller Cam
Victory JR EFI intake
Acufab 2100cfm TB
FAST
Everything from BMR is under the car
Currie 9" with 4.56's
On the Dyno it made SAE 500.4RWHP & 456.1RWTQ. Uncorrected for our elevation it made 413RWHP & 376RWTQ.
Here's a picutre for everyone. Yea for me. :D
http://www.abqdragway.com/spgm/gal/Gr_02_27_05/ts_6075.jpg
Neal