1996 WS-6 T/A Black/Graphite 6spd

WS6/Ram Air TA. Black/Black t-tops 6spd. Most options. 93k or so miles. Paint in fair shape, some dings here and there and the front airdam has lots of bug marks and chips. It's not horrible, but depending on how anal you are, might want to have it redone. I would say body is average for milage etc...

Buying a vette soon so need to get rid of this car. Bought it as a project, but really wanta vette now. Car is in overall good shape, needs a few things to be great!
Needs
Steering is a bit loose-adjustment vs. new rack-I dunno!
Dropped a small nut down engine bay, and it landed in pass side header collector. Needs aircompresser to blow it out.
One of rear wheel lugs is stripped. Needs new stud pressed in-cheap fix.
Rear gear whines-They are brand new 4.10's with about 500 miles on them. Might be able to adjust.

Has-all with 500 miles on this setup
New Low mile LT-1 pull from 97, honed, new bearings and rings.
Lloyyd Elliot ported 95 Castings I had flow numbers but lost them. I do remember that he was really happy and they were slightly above average for his sets he puts out.
Comp Cam--will have to call shop and get specs, but it's pretty big.
Spec Stage 4 clutch
Ported stock TB
Jet hot Coated LT's and Jet hot coated Hooker Y pipe. SLP 2OTL exhaust.
Pro 5.0 Shifter
MadZ28 tune
#30 FMS injectors
deleted Cats and AIR
Comp 1.6 RR
Black ZR-1's 17" with Good rubber
Stealth Box with Punch DVC 10" sub. Kenwood amp. I will probably keep the Alpine deck that's in it now, but will be setup for easy drop in.
I have extra set of leather covers for seats I got off forum member. The drivers side bolster has a bit of wear so I wanted extra set.
I'm sure I'm forgetting a bunch, I put ALOT of $$$ into these parts and install past spring. Wish I would have just saved $$$ now and bought vette later, but thought this is what I wanted.

I took car to Byron after I cleared about 500miles prior to parking it this fall. Ran a 13.2@109MPH on a hot August day. In comparison my buddies 2002 C5 M6 ran 13.8@107. This car is running pig rich and I'm sure that little bolt in the header collector is causing retard spark. The combo I put together should put out near 400RWHP once tune is setup etc...

Sacrafice for $7,500
jcook84889@insightbb.com
<img src=http://forum.fbody.us/attachment.php?attachmentid=402>

How far are you from Waukegan IL.

Looks like about 100miles
probably an 1.5-2hr drive

it's an awesome deal for someone willing to put in just a bit of work into this car. A few odds and ends would make this a legitimate 12sec car. HONEST!

Forgot to add, Newer tires and Slotted/cross drilled rotors front and back.

Drivers side headlight motor makes some noise but still works fine

Bought a Z06 only reason for selling!

pic (http://forum.fbody.us/attachment.php?attachmentid=402)

not a f body member pics to justus6@charter.net please

pic sent

left a message call me

send pic to sebastian1982@nyc.rr.com
Thanks

will call today Shawn
thanks
John

You interested in any trades at all?can u email me some pics...lretsr57@yahoo.com

no trades

sorry guys it's gone! I picked it up yesterday and this car rocks!! John Cook is a great guy to deal with and give my strongest recommendadtion to anyone on this site who may deal with him in the future! now I just need to find a way to make my WS6 beat his Z06. NOS here I come!

Yes car is gone. Surprised it lasted as long as it did. I guess to each their own, and in the end I'm glad it went to someone who will care for it. I put alot of thought into setting up that car, and alot of $$$ into that project. With just a few more completed fixes this car WILL be a monster and could be shown.

Thanks Shawn, and the feeling is mutual; you were excellent to deal with all around. Re: beating my Z06. Well, the T/A will give it a good run right now. However, after my Cam and LT upgrades ;)