Comp R lifters, Comp xr288HR (extreme energy 236/242) cam for sale
Thread Starter
Registered User
Joined: Sep 2000
Posts: 550
From: KC; Where grandma drives in the left lane
The cam and lifters are both as new. Cam has maybe 20 miles and lifters have under 5. Going to solid roller.
Lifters: 125 shipped to the lower 48 SOLD
Cam: 150 shipped to the lower 48.
The cam is 236/242 dur at .050 on 110lsa but I forget the lift. You can look it up at www.compcams.com part number xr288hr. Big cam, sounds like a pro stock and runs like a ****.
I'm not on the board often so please email me:
mgm(at)everestkc.net
Thanks, Matt
Lifters: 125 shipped to the lower 48 SOLD
Cam: 150 shipped to the lower 48.
The cam is 236/242 dur at .050 on 110lsa but I forget the lift. You can look it up at www.compcams.com part number xr288hr. Big cam, sounds like a pro stock and runs like a ****.
I'm not on the board often so please email me:
mgm(at)everestkc.net
Thanks, Matt
Last edited by nosfed; Feb 9, 2005 at 07:08 PM.
Re: Comp R lifters, Comp xr288HR (extreme energy 236/242) cam for sale
Originally Posted by trans9_5am
I did not find part number xr288hr in their part number list.
Brandon
Brandon
It's on there site. http://www.compcams.com/Technical/Se...umber=08-433-8
236 242 .52/.54 with 1.5 @110 lsa
Thread Starter
Registered User
Joined: Sep 2000
Posts: 550
From: KC; Where grandma drives in the left lane
Re: Comp R lifters, Comp xr288HR (extreme energy 236/242) cam for sale
Originally Posted by SS#771
will this cam run in a stock motor?
Thanks fesgali! This is under the Extreme Energy section and is for an SBC, NOT an LT1.
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM



