assembled for a project 6mnths ago and never ran, All parts are new!. 4 bolt main alighned honed, bored 60 over, turned and polished factory forged crank, chevy"pink" rods. IT has perfect circle rings, Kieth Black hyper pistons(debured& polished), melling oil pump.Cam is a comp solid flat tappet part #12-225-4 single pattern specs are.555 lift and 260 duration@050,It also has ultradyne timing chain and cam button, a new Hamburger 9 quart oil pan and moroso timing cover.Heads are Edelbrock E-tech 200 64 cc aluminum heads with 1.60/ 2.02 stainless valves, comp springs, and guide plates.These heads flow about 250-260@600 lift stock,also includes edelbrock super victor intake and aluminum waterpump.With these heads compression ratio is 12 to 1.Well over $5000.00 invested looking to get $3000.00 firm Pick up only. also may be looking to part this engine out if I cant sell it,Short block will yield 9.5 to 1 if 76 cc heads are used. Will ship every thing but short block email sprayta@hotmail.com

 

anyone? this thing was never run,should go 11's easy.