Black95Form
01-04-2005, 01:32 PM
Looking to sell my heads.
2.00 Ferrea Competition 6000 Intake
1.60 Ferrea Competition 6000 Exhaust
Comp 977 Springs
Comp Ti Retainers
Guide Plates
Fresh Valve Job done by Lloyd
Heads Flowed really well, Lloyd has flow sheet
Have less than 200 miles since freshening, brand new springs. Setup to accept .600 lift.
These heads on a 383 with a 224/230 cam (very mild cam) made 420 RWHP since the valve job.
This car went the best of 6.75 at 100mph with a 6 speed, and was running out of gear on the top end of the 1/8th.
$1200
Comp R Lifters less than 200 miles $175
Comp Pro Mag Rockers 1.5 non self aligning 7/16 stud $200
Comp Pro Mag Rockers 1.6 non self aligning 7/16th stud $100 (only 8)
2.00 Ferrea Competition 6000 Intake
1.60 Ferrea Competition 6000 Exhaust
Comp 977 Springs
Comp Ti Retainers
Guide Plates
Fresh Valve Job done by Lloyd
Heads Flowed really well, Lloyd has flow sheet
Have less than 200 miles since freshening, brand new springs. Setup to accept .600 lift.
These heads on a 383 with a 224/230 cam (very mild cam) made 420 RWHP since the valve job.
This car went the best of 6.75 at 100mph with a 6 speed, and was running out of gear on the top end of the 1/8th.
$1200
Comp R Lifters less than 200 miles $175
Comp Pro Mag Rockers 1.5 non self aligning 7/16 stud $200
Comp Pro Mag Rockers 1.6 non self aligning 7/16th stud $100 (only 8)