350TPI5SPEED
12-13-2004, 01:33 AM
i have too many projects to keep this car. ive put $7000 into upgrades on the car. everything listed below has less than 1,200 miles on it except for the hood. the body does need a little work to look 100% again but the car runs awesome. $6,000 OBO
350 (1200 miles) was a 305
crane hyd. roller cam (214*/220* duration @ 0.050 .452/.465 lift)
crane lifters timing chain and pushrods
crane gold 1.6 roller rockers
edelbrock tpi runners and base plate
edelbrock headers and y-pipe
flowmaster american thundercat back
accell 30lb injectors and adjustible fuel pressure regulator
accell coil, distributor, and 8.8 wires
centerforce dual friction clutch and throw out bearing
b&m short throw shifter
160* t-stat
fans turn on at 160* as well to match the t-stat
lowered 2"
aftermarket steering brace(wonderbar)
port and polish heads
2 new rear tires (yokohama yk420 AA rating in traction)
2 front tires were new when i bought the car in february
aftermarket steering wheel
4" cowl hood
2 new interior door panels and arm rests
please feel free to e-mail me for any questions or for pictures z28dad@aol.com
350 (1200 miles) was a 305
crane hyd. roller cam (214*/220* duration @ 0.050 .452/.465 lift)
crane lifters timing chain and pushrods
crane gold 1.6 roller rockers
edelbrock tpi runners and base plate
edelbrock headers and y-pipe
flowmaster american thundercat back
accell 30lb injectors and adjustible fuel pressure regulator
accell coil, distributor, and 8.8 wires
centerforce dual friction clutch and throw out bearing
b&m short throw shifter
160* t-stat
fans turn on at 160* as well to match the t-stat
lowered 2"
aftermarket steering brace(wonderbar)
port and polish heads
2 new rear tires (yokohama yk420 AA rating in traction)
2 front tires were new when i bought the car in february
aftermarket steering wheel
4" cowl hood
2 new interior door panels and arm rests
please feel free to e-mail me for any questions or for pictures z28dad@aol.com