Ryan94Camaro
12-07-2004, 03:40 PM
I need the garage space and have to get rid of my car.
Dark Purple Metalic
T-tops
81,xxx miles
355ci LT1
The engine is a built LT1 with 600miles on it.
Bored .030
eagle steel crank
eagle steel rods
JE/SRP forged pistons
Comp XE 230/236 .544/.555 112LSA cam
Comp pro mag 1.6 rockers
Comp hardened pushrods
SVO 30# injectors
New High pressure oil pump
New oil drive assy.
Heads are milled .030
stock valves
Ports were cleaned up with a sanding roll
Rear end is from a 2002 Camaro SS with 11,000 miles on it.
3.43 gears(no sticky tires have been bolted up to it, not even drag radials)
Intake was port matched to the heads
More performance low mount alt. kit
Mac Mid length headers and y-pipe
2002 SS catback with some $100 quad tips
Boxed in stock panhard bar
Boxed in stock LCA's
Polly busshings on the tranny mount and torque arm mount
Taylor over the valve cover wires
new water pump
The computer was dyno tuned at Total engine airflow for this combo using LT1 edit. The compter still needs to be changed for the 3.43 gears. It is set up for 2.73 gears
AC delete
Heat Delete
P/S Delete
The transmission is a GM rebuilt 4L60E unit that needs to be rebuilt again. The 3 and 4 gear clutch packs are burnt up.
$3500
I REALLY REALLY NEED TO SELL THIS CAR
Dark Purple Metalic
T-tops
81,xxx miles
355ci LT1
The engine is a built LT1 with 600miles on it.
Bored .030
eagle steel crank
eagle steel rods
JE/SRP forged pistons
Comp XE 230/236 .544/.555 112LSA cam
Comp pro mag 1.6 rockers
Comp hardened pushrods
SVO 30# injectors
New High pressure oil pump
New oil drive assy.
Heads are milled .030
stock valves
Ports were cleaned up with a sanding roll
Rear end is from a 2002 Camaro SS with 11,000 miles on it.
3.43 gears(no sticky tires have been bolted up to it, not even drag radials)
Intake was port matched to the heads
More performance low mount alt. kit
Mac Mid length headers and y-pipe
2002 SS catback with some $100 quad tips
Boxed in stock panhard bar
Boxed in stock LCA's
Polly busshings on the tranny mount and torque arm mount
Taylor over the valve cover wires
new water pump
The computer was dyno tuned at Total engine airflow for this combo using LT1 edit. The compter still needs to be changed for the 3.43 gears. It is set up for 2.73 gears
AC delete
Heat Delete
P/S Delete
The transmission is a GM rebuilt 4L60E unit that needs to be rebuilt again. The 3 and 4 gear clutch packs are burnt up.
$3500
I REALLY REALLY NEED TO SELL THIS CAR