Dennys 3 1/2 " Alum Driveshaft
Thread Starter
Registered User
Joined: Mar 2003
Posts: 284
From: Johns Island,SC
Dennys 3 1/2 " Alum Driveshaft
As stated for a manual/auto.Nothing is wrong with it I'm just changing trans and need a longer one.
New-Over $500
$350
John
843-534-6613
http://dennysdriveshaft.com/html/hd_aluminum.html
New-Over $500
$350
John
843-534-6613
http://dennysdriveshaft.com/html/hd_aluminum.html
Last edited by Black Cloud; Oct 30, 2004 at 11:06 AM.
Registered User
Joined: May 2004
Posts: 970
From: Maryland
Re: Dennys 3 1/2 " Alum Driveshaft
What is the hp rating on this DS. I know they make good driveshafts but which model DS is this one? As in, what do they call this on there website. How many miles and passes? Very interested but pics would be appreciated trans9_5am@yahoo.com
Brandon
Brandon
Registered User
Joined: Dec 1969
Posts: 3,499
From: PORTLAND, OR, MULTNOMAH
Re: Dennys 3 1/2 " Alum Driveshaft
If HD and fits my 97SS M6, $200 + shipping. If you can't get what you want for it then I would just hold onto it. Never know when it might become a collector's item and be worth much more. JMHO
Thread Starter
Registered User
Joined: Mar 2003
Posts: 284
From: Johns Island,SC
Re: Dennys 3 1/2 " Alum Driveshaft
Originally Posted by trans9_5am
What is the hp rating on this DS. I know they make good driveshafts but which model DS is this one? As in, what do they call this on there website. How many miles and passes? Very interested but pics would be appreciated trans9_5am@yahoo.com
Brandon
Brandon
1350 U joints
This SHAFT was made for a low 10 sec stick.
About 50 passes.
John
Registered User
Joined: Dec 1969
Posts: 3,499
From: PORTLAND, OR, MULTNOMAH
Re: Dennys 3 1/2 " Alum Driveshaft
I really don't know whether the DS will fit my 97SS. Does the 1350 series fit my Torsen, i.e., are the spines the same? The yolk, etc.? Don't mind paying a fair price for a good DS, but if it doesn't plug and play, Well....you get the picture.
jim
jim