|
||
What will stock fuel lines/rails supportSS Mark 10-25-2004, 11:55 PM I just thought about this. My original goal WAS 700 rwhp but I think I may over shoot it a bit :D so I am starting to think whatelse I will need. Anyway do I have to worry about changing at least the lines or will they be fine? Thanks in advance -Mark mongse_1 10-26-2004, 01:03 AM If it were me, I'd switch to a braided line. Actually, that IS what I did. :D The main reason I changed is because of the pump and regulator on the car. Going from a -12AN feed line (approx. 3/4"), down to a 3/8" plastic line probably isn't the best idea. ;) IDOXLR8 10-26-2004, 01:00 PM I just thought about this. My original goal WAS 700 rwhp but I think I may over shoot it a bit :D so I am starting to think whatelse I will need. Anyway do I have to worry about changing at least the lines or will they be fine? Thanks in advance -Mark I know for a fact that stock lines can support over 700 rwhp. :) SS Mark 10-27-2004, 11:58 AM Thanks for the replys guys, any other input on this? -Mark | ||