For those around IL ( i am either at Champaign or the NW burbs) so anyone in MO, KY, MI, IN, IA, WI even OH etc...

I am thinking about selling my whole set-up. I just dont drive the car really and i still have bills to pay for school and what not..

1. 383 Forged Stroker LT1 Shortblock BRAND NEW

The block was machined 30 over, clearance for the stroker crank and was line bored. The block was also stress relieved and was fully race prepped with each piston hand fit to each cylinder. The pistons are forged JR full floaters, 5.7 Eagle H beam rods and a fully prepped knifed edged, Forged Superlite Crank Nitrade, Proflex rings. It is fully assembled with knew cam bearings, mains etc.
The block was studded and has 2bolt mains that have been stress relieved.
They are flat tops, the EST is around 11.0 with STD LT1 heads
roatating assembly is fully ballanced, Clevite Bearings, oil passages drilled larger, Bored and honed with a torque plate, Line bored with ARP studs, new freez plugs and cam bearings.

2. Stage 4 Auto Transmisson 4L60E from a 94 Z28
100 miles on it...

• Stage 4 Built with all new parts
• Extra clutches and bands (High-Performance clutches and bands)
• Super servo
• Performance Planatary Gears
• New Solinoids
• Trans-Go shift reprogramming
• Super Sun-Shell and input shaft
• Race pump
• B&M super-cooler included with braided lines
• TCI Street-Fighter 3000 stall convertor with lockup
• SFI-Approved B&M flexplate
• Energy Suspension Poly Tranny mount
• Rated at 700 max hp

3. Lloyd Elliot Ported LT1 Heads BRAND NEW

Ferrera 2.0/1.56's valves, rocker studs, comp987 valve springs, milled .10.

1500-102.5/76.2
2500-163.0/120.5
4500-254.2/174.7
5500-271.5/190.2
6000-272.7/193.4
6500-272.2/194.4



Shortblock prices will run you anywhere 3000.00-4000.00 depending on what parts you use, all the work for the block, the block itself and everything installed...

Tranny Costed 2000+ and then core

Heads i paid 1200 + core from llyod...



I'm NOT looking for those prices....but if you are interested...Email me and we'll talk...

Email me at: hmkhan@uiuc.edu or
AIM: chesee48

 

BUMP for the night crowd

 

how much are you looking to get out of the tranny, pm me with info...

 

up for ya... and you have pm

 

i also would like to know what you want out of the tranny.

 

I emailed you at the above posted address.

 

P.M me a price on the tranny . Ben

 

pm me a price for the shortblock + heads please. thanks.


-Daniel

 

for those that emailed/PMed me about the heads, i will get back to you guys soon...The motor and tranny are the first things i want gone since i know the heads i can sell anyday and i can ship those....


And i forgot to add that the Tranny has a dip-stick and a tranny cooler with steel braided lines!

I do have things also if someone wanted the block like AC delete pulley, Chromely pushrods, new waterpump etc...
and the shortblock was built to handle n20!

any questions? send them to: hmkhan@uiuc.edu

thanks guys!

 

Will be talking brother.... bump for ya..... and so i can keep this in my post list