F/S local, 4th gen rear end

stock 10 bolt from a 94 Z, 3.42 gears, posi, quiet when pulled, disc brakes, will need pads and rotors, I can get them for you for a few bucks more, will look at prices onm the rotors

$350 OBO w/old brakes

oooo. bout how many miles are on it?

oooo. bout how many miles are on it?

80K

Exxccellleeent. Then all I need to do is find someone who can do a speedo correct on my 95 3.4 V6 car. *grumble* this could take a while.

I could do the speedo thing. I have a 95 style cable and Tunercat you would need a working laptop or a P.C. you don't mind dragging outside.(That's how I do it.) . I am in East Lansing pretty frequently. I Know I will be there the Nov. 3rd Weekend Probably sooner.

EDIT: I don't know how it being a V6 may matter. But if it does I still have the cable if you can find whatever software.

I believe that the V6's used a different computer that the V8's.

I believe that the V6's used a different computer that the V8's.

Completely different ECM too? I have no idea. I figured it would be the same connector and ECM just different programming. Or at least the same connector so someone could just get a different definition file perhaps?... Either way I'd still ike to help if I can.

Yup - we did use a different setup. To get programming done the computer has to be physically taken out of the car nowadays. Hypertech back in the day had a programmer for it but those are discontinued and the odds of finding one for sale are slim to none!