94LightningGal
10-03-2004, 03:36 PM
I read this on the Car and Driver forums. I thought it was very interesting, as it is from the perspective of the import car driver (from WRX to BMW).
October 1, 2004
2005 Ford Mustang Road Test
by Trevor Hofmann , Canadian Auto Press
If the Viper is America's supercar and the Corvette its sports car, the Mustang has to be America's GT, despite Ford dubbing its first blue-oval branded supercar in decades with the name. Even Camaro and Firebird fans can't dispute such a claim now that both models have been discontinued.
No, the Mustang holds the GT title based on its 40-plus years of service and absolute dominance in the market. Even in the current slow-selling coupe and convertible market, that has caused most competitors to have either pulled out or dramatically reduced sales projections for two-door models, the soon to be axed Toyota Celica is a good example, Mustang sales are strong.
The new 2005 model will be much stronger, according to recent reports. Orders are running sixty percent higher than expected (see automotive news archives for Sep 29, 2004: New 2005 Ford Mustang Getting Ready for a Dealer Near You), which of course is a problem most automakers wouldn't mind facing. Why such excitement about the new car? Not only does it look completely revised on the surface, while at the same time very similar to classic '60s pony cars that so many muscle car collectors adore, but it is also completely new under the skin.
I took the opportunity to test this out first hand at a press event in and around Los Angeles, CA recently, and came back impressed. And this from a guy who previously stated in a review of a 2003 Ford SVT Mustang Cobra coupe (see new vehicle review archive under "Ford" for June 13, 2003), ".... open the trunk and sloppy welds are immediately apparent. More so, what looked like porous body filler coated the trunk surround of my test car." I was equally overjoyed with the interior, stating in the same review, ".... the 1-inch plus gap where the dash meets the door surround appears kit-car-ish and the heating and ventilation controls seem as though purchased out of an aftermarket catalogue."
In one, long-anticipated model year Ford has changed all that, and in doing so brings new respect to the venerable steed. Starting on the outside, panel gaps are straight, narrow and equally spaced. Paint quality is superb, and there's no body-filler present under the trunklid, despite my various test cars being pre-production units. Yeah, Ford got the new car's exterior quality spot on, a great leap forward from any previous 'Stang.
What about inside? Any Fox-bodied Mustang owner, that would be anyone who bought a 1979 through 2004 version, will be impressed with the new cabin. It looks superb, offers serious improvements in fit and finish, and even includes real aluminum trim featuring a unique horizontally etched pattern on GT models. The seats are supportive, switchgear much better than anything that came before and ergonomics also a major upgrade. Pretty well everything is better, including plastics quality. The latter subject, however, would be my only complaint. Although at its mere $23K and change ($19K USD) starting point I find it difficult to gripe about common grade plastics, when fully loaded GT models get into the mid-$30s and the tactile sensation that comes from soft-touch plastics are more common. I was hoping that Ford would really stretch in this area, taking the opportunity to serve up similar perceived quality levels to what Chrysler Group is starting to offer in most of its recent products and GM is beginning to deliver inside its new Pontiac G6 and Buick Allure (LaCrosse).
This issue, however, while bothering a certified import snob like myself and possibly stymieing the purchasing potential of conquest buyers that could be lured away from premium brands such as BMW (again I would be one such customer), won't be an issue in the slightest to diehard Mustang followers. These will be blown away by all of the improvements, most importantly driving dynamics.
Yeah, I was granted ample opportunity to test drive both V6 and V8 models, and came away grinning from ear to ear. As a backgrounder, I learned what chief engineer, Hau Thai-Tang could do with a live axle setup when I first drove the special edition 2002 Mustang Bullitt, but nothing could have prepared me for how stable and rewarding the 2005 would be. First of all, the car is smooth and comfortable on rough inner-city pavement - OK, LA's side streets are nothing like frost-heaved Canadian roads, but often ill-kept just the same - never forcing me to endure the unsettling bunny-hop that previous versions exhibited when cornering quickly on uneven pavement. What an improvement!
Initially I had an entire morning of winding-road fun in the base V6 model, a revelation of inspiration in comparison to the outgoing entry-level Mustang. This model makes up the vast majority of pony car sales, and therefore getting it right is extremely important to Ford. The automaker nailed it, for the most part at least. It tackles corners with gusto, thanks in part to standard P215/65R16 96T tires on 16 x 7-inch alloy wheels. The wheel and tire package compliments the suspension well, offering a nice balance of spirited handling and ride comfort. I noticed a slight tendency for the car to squirm a little during harsh side-to-side transitions, something that seemed to be eradicated when upgrading to the GT model, which features a sport-tuned suspension featuring a 34 mm tubular front stabilizer bar upgrade from the stock 28.6 mm component, and the addition of a 20 mm stabilizer bar in the rear where none is present in V6 trim, plus standard 17-inch rims and P235/55ZR17 98W performance tires.
The stock 4.0-liter 60-degree V6, that still uses solid but heavy iron as its block material, sports 210 horsepower at 5,250 rpm and 240 lb-ft of torque at 3,500 rpm. Look back a few years and that's a similar number to what the 5.0-liter LX or GT Fox-platform Mustangs were producing, and we flipped out about this old model's performance when it debuted. Needless to say, most drivers won't see a need to upgrade to the V8. Like those early V8s, the V6 makes do with 2-valve per cylinder head architecture, although its single overhead cam design is a major step up the desirability ladder from the Mustang's overhead valve days.
October 1, 2004
2005 Ford Mustang Road Test
by Trevor Hofmann , Canadian Auto Press
If the Viper is America's supercar and the Corvette its sports car, the Mustang has to be America's GT, despite Ford dubbing its first blue-oval branded supercar in decades with the name. Even Camaro and Firebird fans can't dispute such a claim now that both models have been discontinued.
No, the Mustang holds the GT title based on its 40-plus years of service and absolute dominance in the market. Even in the current slow-selling coupe and convertible market, that has caused most competitors to have either pulled out or dramatically reduced sales projections for two-door models, the soon to be axed Toyota Celica is a good example, Mustang sales are strong.
The new 2005 model will be much stronger, according to recent reports. Orders are running sixty percent higher than expected (see automotive news archives for Sep 29, 2004: New 2005 Ford Mustang Getting Ready for a Dealer Near You), which of course is a problem most automakers wouldn't mind facing. Why such excitement about the new car? Not only does it look completely revised on the surface, while at the same time very similar to classic '60s pony cars that so many muscle car collectors adore, but it is also completely new under the skin.
I took the opportunity to test this out first hand at a press event in and around Los Angeles, CA recently, and came back impressed. And this from a guy who previously stated in a review of a 2003 Ford SVT Mustang Cobra coupe (see new vehicle review archive under "Ford" for June 13, 2003), ".... open the trunk and sloppy welds are immediately apparent. More so, what looked like porous body filler coated the trunk surround of my test car." I was equally overjoyed with the interior, stating in the same review, ".... the 1-inch plus gap where the dash meets the door surround appears kit-car-ish and the heating and ventilation controls seem as though purchased out of an aftermarket catalogue."
In one, long-anticipated model year Ford has changed all that, and in doing so brings new respect to the venerable steed. Starting on the outside, panel gaps are straight, narrow and equally spaced. Paint quality is superb, and there's no body-filler present under the trunklid, despite my various test cars being pre-production units. Yeah, Ford got the new car's exterior quality spot on, a great leap forward from any previous 'Stang.
What about inside? Any Fox-bodied Mustang owner, that would be anyone who bought a 1979 through 2004 version, will be impressed with the new cabin. It looks superb, offers serious improvements in fit and finish, and even includes real aluminum trim featuring a unique horizontally etched pattern on GT models. The seats are supportive, switchgear much better than anything that came before and ergonomics also a major upgrade. Pretty well everything is better, including plastics quality. The latter subject, however, would be my only complaint. Although at its mere $23K and change ($19K USD) starting point I find it difficult to gripe about common grade plastics, when fully loaded GT models get into the mid-$30s and the tactile sensation that comes from soft-touch plastics are more common. I was hoping that Ford would really stretch in this area, taking the opportunity to serve up similar perceived quality levels to what Chrysler Group is starting to offer in most of its recent products and GM is beginning to deliver inside its new Pontiac G6 and Buick Allure (LaCrosse).
This issue, however, while bothering a certified import snob like myself and possibly stymieing the purchasing potential of conquest buyers that could be lured away from premium brands such as BMW (again I would be one such customer), won't be an issue in the slightest to diehard Mustang followers. These will be blown away by all of the improvements, most importantly driving dynamics.
Yeah, I was granted ample opportunity to test drive both V6 and V8 models, and came away grinning from ear to ear. As a backgrounder, I learned what chief engineer, Hau Thai-Tang could do with a live axle setup when I first drove the special edition 2002 Mustang Bullitt, but nothing could have prepared me for how stable and rewarding the 2005 would be. First of all, the car is smooth and comfortable on rough inner-city pavement - OK, LA's side streets are nothing like frost-heaved Canadian roads, but often ill-kept just the same - never forcing me to endure the unsettling bunny-hop that previous versions exhibited when cornering quickly on uneven pavement. What an improvement!
Initially I had an entire morning of winding-road fun in the base V6 model, a revelation of inspiration in comparison to the outgoing entry-level Mustang. This model makes up the vast majority of pony car sales, and therefore getting it right is extremely important to Ford. The automaker nailed it, for the most part at least. It tackles corners with gusto, thanks in part to standard P215/65R16 96T tires on 16 x 7-inch alloy wheels. The wheel and tire package compliments the suspension well, offering a nice balance of spirited handling and ride comfort. I noticed a slight tendency for the car to squirm a little during harsh side-to-side transitions, something that seemed to be eradicated when upgrading to the GT model, which features a sport-tuned suspension featuring a 34 mm tubular front stabilizer bar upgrade from the stock 28.6 mm component, and the addition of a 20 mm stabilizer bar in the rear where none is present in V6 trim, plus standard 17-inch rims and P235/55ZR17 98W performance tires.
The stock 4.0-liter 60-degree V6, that still uses solid but heavy iron as its block material, sports 210 horsepower at 5,250 rpm and 240 lb-ft of torque at 3,500 rpm. Look back a few years and that's a similar number to what the 5.0-liter LX or GT Fox-platform Mustangs were producing, and we flipped out about this old model's performance when it debuted. Needless to say, most drivers won't see a need to upgrade to the V8. Like those early V8s, the V6 makes do with 2-valve per cylinder head architecture, although its single overhead cam design is a major step up the desirability ladder from the Mustang's overhead valve days.