3rd Gen's with Intercoolers

I hear the ATI Twin intercoolers arent' that great.. Haven't heard exactly why..??? Any info..?

As an introductory intercooler/s, they may be fine. But for people looking for a little more cooling, 1 bigger front mount seems the way to go.

With a huge front end intercooler.. What kind of dimensions will fit on a 3rd gen? Anyone have pics? I would like to see where and how they routed their pipes.. I have heard that alot of people are really moving towards intercoolers that have the inlet and the outlet on opposite ends of the intercooler... Better Flow Charaterisitcs?

You can go pretty large. You will have to get creative though. I have a front mount on mine(intercooler is small though). My camera should be here in a couple of days so I will take some pics. My piping is tight so I may go to a straight through if I go bigger.

http://community.webshots.com/photo/33244174/190246697HYpTnd


http://community.webshots.com/photo/33244174/190247014HLnDaR

http://community.webshots.com/photo/33244174/190246697HYpTnd


http://community.webshots.com/photo/33244174/190247014HLnDaR


Do you have to have a cowl hood to run your pipes that way? What is the size of your intercooler? You dont' have any pics with the front off do you? I have a 3rd gen and I am looking for pics like that..

Do you have to have a cowl hood to run your pipes that way? ..

yes

What is the size of your intercooler? ..

not sure-but it is an off the shelf Spearco

You dont' have any pics with the front off do you? ..

no, sorry

Well thanks anyway.. Anyone else?

I have a griffin with 3 inch end tanks. The core measures 9 inches tall by 24.5 wide and 3.5 thick now add 3 inches on top and 3 on bottom for the endtanks. All I did was bend the one suport back and kept my hood latch. You can kinda see it in the pic
http://community.webshots.com/photo/59100089/136392031BlSOOq
I could of gone a little bigger but I only wanted one good for 1000hp :D

Hey you could go over to thirdgen.org there's a guy over there by the name of Willie who came up with a twin flow intercooler for 3rd gens.Look in their power adder section.I think tenacisous performance is the only one who really carries it.

superiroc, are you using a bottled water bottle for a puke tank:)? It looks familiar.

What kind of numbers does that thing make?

Here you go: http://pg.photos.yahoo.com/ph/evolvedrs/album?.dir=fb33&.src=ph&store=&prodid=&.done=http%3a//pg.photos.yahoo.com/ph/evolvedrs/my_photos

Don't mind rust. I will be painting all of that soon. If you need any more, let me know.

The engine is a stock L98 with the HSR intake as the only mod. Car went 13.2@112mph on regular tires 2.6 60ft. The car has a ok tune with the FAST ecu I realy can't tune the car this computer/tuning is new to me I have the system tentavly sold to a guy and I will be building a nast twin setup with a dart little m 400 engine looking for 1000rwhp this spring