Blower 383 Lt1 Short Block Must Go
Thread Starter
Registered User
Joined: Jan 2004
Posts: 213
From: Orange County, NY
Blower 383 Lt1 Short Block Must Go
This is a LT1 fully forged blower short block
4340 Eagle Crank
4340 6.0 Eagle Rod
Srp Dish Pistons 9.8:1 with stock heads
Block was fully machined, new cam bearings, the full works. Over 2,000 worth of machine work. Rotating assembly has 200 miles on it. Also comes with high volume oil pump,and a flexplate.
The block is fulley preped with 4 bolt angle splayed mains.
3000 OBO
4340 Eagle Crank
4340 6.0 Eagle Rod
Srp Dish Pistons 9.8:1 with stock heads
Block was fully machined, new cam bearings, the full works. Over 2,000 worth of machine work. Rotating assembly has 200 miles on it. Also comes with high volume oil pump,and a flexplate.
The block is fulley preped with 4 bolt angle splayed mains.
3000 OBO
Thread Starter
Registered User
Joined: Jan 2004
Posts: 213
From: Orange County, NY
Re: Blower 383 Lt1 Short Block Must Go
if u has heads and a intake. you whould needa
Oil Pan
Timing Chain
Cam
Lifters
Push Rods - Can use stock ones
Roller Rockers - Can use stock rockers
Harmonic Balancer - Can use ur stock one
Thats about it
Oil Pan
Timing Chain
Cam
Lifters
Push Rods - Can use stock ones
Roller Rockers - Can use stock rockers
Harmonic Balancer - Can use ur stock one
Thats about it
Registered User
Joined: Aug 2003
Posts: 42
Re: Blower 383 Lt1 Short Block Must Go
I just IM'ed you through AIM. I am tcreativecom - shoot me an email info@tannercreative.com or IM me. Very interested! 
