what must I do to my engine to handle a supercharger without rebuilding??

detroit1994z28
08-01-2004, 03:38 PM
I have a 94 camaro m6 z28. This engine is stock expcet with a hot cam and 1:6 rockers and all bolt ons. I wanted to put a high boost supercharger on it next summer. I know you have to rebuild sooner or later. But I was going to rebuild my engine where force induction will not cause a rebuild every so many miles. What boost could I put on it with a built engine to handle a supercharger??? How much horepower. I'm looking for 11 second daily street car. Could my hot cam work good with it to put me into the 11's. Maybee a 12-15# of boost.

rskrause
08-01-2004, 04:47 PM
Build a low compression motor with good forged "blower" pistons.

Rich Krause

donot_4get
08-01-2004, 08:35 PM
If you are going to rebuild your engine, might as well go with a blower cam instead of the hotcam :cool: