Scrapping project lots of parts FS and a car soon.
Thread Starter
Registered User
Joined: Jun 2001
Posts: 211
From: Dallas TX
Scrapping project lots of parts FS and a car soon.
96 Black Formula M6 will be in stock condition with lots of new parts. I should have it together with in the next 2-3 weeks. I will end up selling in the 4500.00 range it will have new OPTI, WP wires, and all new gaskets in the motor. Aprox 80k miles
I also may have a very nice new 355 LT1 street motor that was built by Watts Racing Engines and heads by Trevor Johnson. This will not be for sale unless my wagon sells.
Avalible now
- good used Moroso CAI 125.00 sold
- new in box hooker SC headers non coated 300.00
- new in box Spec Stage III clutch kit 400.00 pending
- custom 3.5" exhaust with Dynomax welded Ultraflo muffler and Flowmaster scavanger collector. All mandral bent. Copy of Mufflex ststem. 225.00
I also may have a very nice new 355 LT1 street motor that was built by Watts Racing Engines and heads by Trevor Johnson. This will not be for sale unless my wagon sells.
Avalible now
- good used Moroso CAI 125.00 sold
- new in box hooker SC headers non coated 300.00
- new in box Spec Stage III clutch kit 400.00 pending
- custom 3.5" exhaust with Dynomax welded Ultraflo muffler and Flowmaster scavanger collector. All mandral bent. Copy of Mufflex ststem. 225.00
Last edited by gearheads78; Aug 5, 2004 at 09:57 AM.
Thread Starter
Registered User
Joined: Jun 2001
Posts: 211
From: Dallas TX
Re: Scrapping project lots of parts FS and a car soon.
If my wagon sells I will take 1000.00 for the heads and matched intake they are stock valved and flow as good some big valved heads and 2100.00 for the bare short block stock crank rods 11.2 to1 JE pistons/total seal fully balanced. It will make an awsome street motor. If I do sell it I will have the following parts avalible separatly
new cc305
new SA Comp rockers
new hardned push rods
new meziere WP
good used 30lb FMS injectors
new cc305
new SA Comp rockers
new hardned push rods
new meziere WP
good used 30lb FMS injectors
Thread Starter
Registered User
Joined: Jun 2001
Posts: 211
From: Dallas TX
Re: Scrapping project lots of parts FS and a car soon.
Pics of exhaust is being sent.
Hookers are long tubes.
Price is firm on Spec. It is a carbon version I paid 480.00 plus freight. I don't have a flywheel.
Thanks
Richard
Hookers are long tubes.
Price is firm on Spec. It is a carbon version I paid 480.00 plus freight. I don't have a flywheel.
Thanks
Richard
Registered User
Joined: Jul 2004
Posts: 141
Re: Scrapping project lots of parts FS and a car soon.
Can you send some pics of the CAI to adongL2@aol.com?? Also is the 125 shipped too? Thanks for your time.
Thread Starter
Registered User
Joined: Jun 2001
Posts: 211
From: Dallas TX
Re: Scrapping project lots of parts FS and a car soon.
Rocket, pic sent... the prices do not include freight. Freight will not be much on anything but the headers. They will be 30.00-40.00 aprox. Also I do accept paypal but you need to add 3% to cover thier BS fee if you want to pay that way.
Registered User
Joined: Jun 2003
Posts: 287
From: Pensacola, FL
Re: Scrapping project lots of parts FS and a car soon.
Thread Starter
Registered User
Joined: Jun 2001
Posts: 211
From: Dallas TX
Re: Scrapping project lots of parts FS and a car soon.
Originally Posted by Lt1tko5o
I need a set of 30lb injectors, how much?
Brian
Brian
Thanks
