Anyone in P TOWN install cams?

I am thinking my next mod is going to be a cam, but i dont want to pay out the a$$ to get it installed. Anyone around town do it for a decent price? I'll buy beer and pizza:D

Betcha a dollar to a pinch of clam sh!t that if you supply the beer and pizza a few of us will show up to help tear it down andput it back together.

I got weekends off right now through May. Name a date and time.

Ken

I'm willing to help. I haven't done an LS1 cam yet, but I understand it is easy until you have to change the valve springs. I'm sure Bobby would help.

Originally posted by Rockin C Racing
I'm sure Bobby would help.

LOL,,, there's one way to recuit peep's. LOL..... Publicly delegate others haha :thumb:

Hey everyone, Cody will mow your lawn and rake your leaves for a beer and a hotdog lol..... I'm just messin' with ya man. :D

Honestly though, from what I've heard, you could swap a couple different cams in an LS1 in the same day. Buy 3 cams, try em all out lol.... It sounds very easy to do cam swaps in LS1's. :)

Mike

Originally posted by Mikey 97Z M6
LOL,,, there's one way to recuit peep's. LOL..... Publicly delegate others haha

Hey everyone, Cody will mow your lawn and rake your leaves for a beer and a hotdog lol..... I'm just messin' with ya man.

Honestly though, from what I've heard, you could swap a couple different cams in an LS1 in the same day. Buy 3 cams, try em all out lol.... It sounds very easy to do cam swaps in LS1's.

No problem. I've got a can of gas and matches to take care of those lawns and leaves.;)

Don't blame me because I know how to get out of work and look good at it. :D

We need to get a cam and heads back on a particular LT1.

Hey Killaz, you still gettng any flak from your neighbors about the exhaust?

Originally posted by Rockin C Racing
No problem. I've got a can of gas and matches to take care of those lawns and leaves.;)

Don't blame me because I know how to get out of work and look good at it. :D

We need to get a cam and heads back on a particular LT1.

I'zz just razzin' ya. :)

Speaking of lighting fires, I need light a fire under a few ass' at my machine shop. :) Got my parts from the powder coaters yesterday so the only thing holding me up is the heads.

Has anyone been to Woodburn yet this year?

Mike

ken- na they are ok with it. They just didnt like the open header thing o wellhaha:D

Damn!! I'm in salem and would love to come help you guys out. I've done a few LS1 cam swaps, even done some head swaps for LS1's. I just don't know about the hour drive though:rolleyes: One advise though, use a hub installer made to work with an LS1. If you try the ol' threading the crank bolt, you might just be in it for more than just a cam swap:D

Bring it over make sure you have a cam install tool we'll hook it up. Easy job..

sweet it will be in the next few weeks. so all i need is a cam install tool?

No you need a bunch of stuff but the cam install tool is pretty important. You'll need a way to change out your springs I have the Larry tool but no compressor. Also you'll need a good pulley puller..

If my garage wasn't full of Fiero I'd say we could do it here, I'm fairly well stocked. Oh well. Give me some advanced notice and I'll try to show up.