|
||
Silicon reducers for relocated Maf?slimdawson 04-19-2004, 03:48 AM Hi. I need to relocate my Maf to after charger placement. How did you guys do it? I figured silicon reducers but not sure. I have a p600b kit if it matters. Using the stock MAF and the 3" inlet pipe that came with the kit, what is the best way to connect? Thanks. David94TA 04-19-2004, 07:31 AM Look here: http://www.turbohoses.com 95 Silver TA 04-19-2004, 02:44 PM Originally posted by David94TA Look here: http://www.turbohoses.com Thats what I did, they sell 3.5in reduced to 3in hoses. And thats what I did on mine. Heres a pic of mine: http://images.cardomain.com/member_images/6/web/342000-342999/342629_65_full.jpg And a little write up I did is in on this page (you will need to scroll about half way down). http://camaroz28.cardomain.com/memberpage/342629/3 Thx, Claude SMOKNZ 04-19-2004, 04:29 PM Originally posted by David94TA Look here: http://www.turbohoses.com DAMN Atp sells them for less than half that price!! http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=tp&Category_Code=SIL-TRN I'd try here first! Bill David94TA 04-19-2004, 05:09 PM NOW you tell me! I thought TurboHoses was a little pricey. Man, that chaps me. Oh well, live and learn. Thanks SMOKNZ. And I'm sure that slimdawson thanks you for saving him $40.00. SMOKNZ 04-19-2004, 10:42 PM I actually just stumbled on the webpage a few weeks ago when LT1RX7 posted about a oil line restricter they sold. I followed the link and checked out what else they had to offer. Sorry I didn't know about them in the past! Bill | ||