Gauging interest in my car for sale in the CA area

It’s a 1994 Camaro Z28 A4, car just turned 79k. Teal in color, power windows and locks, T-tops, leather, A.C., heater, after market stereo. New water pump, optispark, and powersteering pump(all have about 10k on them) It has a couple aftermarket parts, and ill try and list them here.

Edelbrock shortie headers & Y pipe
3 inch intermediate pipe
3 inch cutout w/electric control
3:73 gears in the rear(have stock 3:23 gears still if wanted)
BMR LCA's
Kenny brown double diamond SFC's (powder coated red)
Front and rear power slot rotors (about 10k on them)
MSD 6A digital ignition
MSD blaster coil
Manual fan on/off switch
K&N FIPK
ported 52mm throttle body
GM hotcam kit (cam, 1.6 roller rockers, springs, retainers, clips ect...about 5k on that)
160* thermostat

A few cosmetic upgrades that include but are not limited too;
AR torque thruster II's with BFG g-force TA's 85% thread left
rear black outs
front turn signal black outs

Here are a couple pictures. (http://community.webshots.com/album/122743434EeffZj) I can have more if needed.

There are a few more things, but I can't seem to remember them right now. The car runs and sounds great, never over heats or has any trouble. It’s very clean inside and out, im a very responsible non-smoker.

I'm really just gauging interest in it, I really do love this car, but with school, and work, the car isn’t the best to commute in, and also I would like to start a project on a 57 belair. Anyway, do you guys think im crazy asking for 8k for it? Let me know what you guys think?

seth

8k sounds about right....but you could try and part out some of the mods to make more money...I sold my 96Z with 77k on it for 7800. I had returned it to pretty much stock except for catback and small intake peices. Good luck man....

Originally posted by KwikistZ
8k sounds about right....but you could try and part out some of the mods to make more money...I sold my 96Z with 77k on it for 7800. I had returned it to pretty much stock except for catback and small intake peices. Good luck man....

I think that is a good idea. I might be interested in some things if you did that.

I was thinking of going back to stock, but the only stock pieces I have are the 3:23 gears for the rear end. Think it would be a good idea to try and get some stock used parts off some members here, or dont even bother?


seth

It matters, if you can do all of the mechanical work to get these parts off then it might be worth it. If you are going to have to pay someone to do it then I would say don't do it. I have a stock coil and stock therm if you are thinking about it. LMK if you part it out I might be interested in some stuff. Thanks.