Parting out 95 camaro z28

Drivetrain is gone except for the 3.42 rearend.
Doors are gone as are hood and dash.

Have things like:

hatch with glass
k member with rack
salad shooters with tires
suspension
steering column
pass airbag
fuel lines
t top hardware and weather stripping
most interior plastic
front fender
inner fenders
front bumper support
brakes
other misc stuff

Or make an offer and take the whole thing CHEAP. Salvage title.

I can take pics of parts if you want them, and if you buy the whole car I may be able to deliver for you.

I need the T-top hardware for the rear part of the plastic trim. The little peices that screw into the metal part the tops lock into. If you have em and they are dark graphite in color I'll take em off your hands asap. That's all I need to finish my interior. Also btw are you selling the complete rear and if so is it w/brakes? I have a friend that's interested. Thanks

the rear is complete but the brakes aren't on it. I can sell it like it is or put the brakes on for the right price ;)

As far as the t top parts, I am not sure which ones you are referring to... the only pieces I can think of are metal so they wouldn't be dark graphite... :confused:

I'm looking for the wiper arms plastic covers....
you got?

Originally posted by KGRESOCK
I'm looking for the wiper arms plastic covers....
you got?

Sorry Kev

how much for the K_member? Let me know ASAP.

Thanks,
Jay

Originally posted by CamaroSS30th
how much for the K_member? Let me know ASAP.

Thanks,
Jay

how much of it you need? I'd prefer to seel it as a complete unit if I do. K member, rack, a arms, springs and brakes.

let me know

I just need the K-member and the lower a-arms. how much for that? How much for the whole thing?

Give me a good price and I can pick it up this weekend.

-Jay

The parts I'm referring to are the plastic pieces that cover the little metal pieces, they actually screw right into the metal. Look at this thread here (http://web.camaross.com/forums/showthread.php?s=&threadid=240122) the pictures injuneer posted for me are of the parts I need. I have the front pillars that cover the metal part but I don't have the rear. I thought I needed the complete rear plastic(the part that has the armrest, covers the speaker, and has the hanger hook on it) but from what I understand all I need is just the small piece that covers the T-top hardware. It's hard to explain what I want sorry, hopefully you've got what I'm saying. Thanks.


Oh BTW what kind of price are you looking to get for the rear w/brakes?

Jay, I tihnk I might, butI'll have to get in there and see. I'll let you know

Who much are you asking for the rear end. And does it have the brakes on it ?

Originally posted by CamaroSS30th
I just need the K-member and the lower a-arms. how much for that? How much for the whole thing?

Give me a good price and I can pick it up this weekend.

-Jay


hey mike, if you can seperate, I'll take the rack

Originally posted by Eddie95Z28
Who much are you asking for the rear end. And does it have the brakes on it ?

200 without brakes, 250 with

Originally posted by Timberwolf
200 without brakes, 250 with

Now I asked you that and you never answered me.:(

Oh I forgot. How many miles are on the rear/car?

Any word on the K-member??

Thanks,
Jay

a stick or auto? if auto do you still have the prnd and the part under it on the consolre? where the light mounts to.:)

Originally posted by Jay-Roll
Now I asked you that and you never answered me.:(

you did? guess I missed it. sorry.

Auto trans, I think all the console stuff is gone

Make an offer on the k member. I have a guy in Wisconsin that wants it bad, but if I don't have to ship it....

how about the dash bezel speedo and all that stuff?:D

Originally posted by jshigman
how about the dash bezel speedo and all that stuff?:D

Sorry, like I said in the original post...dash is gone.

Would anyone be interested in the whole car for say... $600? There's a lot more than that in parts

Send me pics of the car asap... I might take it... if not $90 for the K-member set-setup? Not to sure what its worth..

Thanks,
Jay

Originally posted by CamaroSS30th
Send me pics of the car asap... I might take it... if not $90 for the K-member set-setup? Not to sure what its worth..

Thanks,
Jay

http://www.sixtyninecamaro.com/images/treyler/trey1.jpg

I'll pass on the car... how about that k-member stuff though...

Originally posted by Timberwolf
200 without brakes, 250 with


How would you rate the condition of the rear and how many miles on it. One more question, where is it located?

Originally posted by Eddie95Z28
How would you rate the condition of the rear and how many miles on it. One more question, where is it located?

I'm in Battle Creek. Rear is fine. It's not a show piece, but that's just a little elbow grease away.

$90 = Kmember setup?

Originally posted by CamaroSS30th
$90 = Kmember setup?

you gonna pick it up or would I have to ship it?

Pick up

Originally posted by CamaroSS30th
Pick up

ok. Make it $100 and it's yours. I'll just need a little time (and dry weather) to get it yanked. Might be able to have it out saturday if I can get the floor jacks over there. to get it up in the air. I have to pull the rack for Dave too

how about $90 and I'll help you pull it out Sat. morning.

Timberwolf do you have the radiator still? Mine's leaking somwhere between under the radiator cap and the low coolant sensor. I'm going to look for where it is this weekend and JB weld the crap out of it if its minor but probably better off with a non cracked radiator. I'm takin it off anyways so its probably more worth it to get another one. LMK, thanks.

I ghave one, but I don't remember if it's lt1 or ls1. I'll have to check

Originally posted by Timberwolf
I ghave one, but I don't remember if it's lt1 or ls1. I'll have to check Ok thanks.

Ever find that radiator or which kind it is LT1 or LS1? LMK.

EDIT: I already have a radiator on the way from someone else on the board, thanks anyway.

I need the overflow tank/battery tray, with the overflow hose.

I also need the plastic trim panel on the lower drivers side front. It's the part some guys remove when installing a CAI.

I passed on offers awhile back cause' I wanted to find a source that had both.

I was working on putting in the rag joint eliminator and busted one of the u-joints on the steering column, Have you got the u-joint assembly for the steering column?

If I take a picture of something I broke can you tell me if you have and how much??

Its a plastic line thats routed in with a all the fuel lines.. Its works its way to the left side of the Intake manifold.. I think theres 2 of them:confused:

Originally posted by TrouserSnake
If I take a picture of something I broke can you tell me if you have and how much??

Its a plastic line thats routed in with a all the fuel lines.. Its works its way to the left side of the Intake manifold.. I think theres 2 of them:confused:

yep, let me know

Did you ever look to see if you had those T-top trim pieces?