Flowtech header GP?

What do you guys think? Can anyone set one up? Anyone else interested?

are these long tubes or shorties?

Long tube I believe.......

I would be in but want to buy soon so double check before you engrave it in stone

anyone else interested?

I would be in if they have good coating and O2 bungs.

We can put something together if there is enough interest. These headers aren't to expensive so there isn't much $ in them to discount.

Thanks,
Tom

Originally posted by tbyrne
We can put something together if there is enough interest. These headers aren't to expensive so there isn't much $ in them to discount.

Thanks,
Tom

Tom, what could you do to the price? What about a discount on the headers/ypipe combo?

I'll work on some numbers. We'll need more interest than what's posted above though :)

how much interest do you need to make it worth your time?

We'd probably go for 10 or more orders.

So lets count who's in....

I'm in :D

Tom, do the TTS headers for the 96-97 LT1 come in longtubes?
Thx-Goose :)

The TTS headers for the LT1 are a shorty design. They only have long tubes for the LS1

I would be in on the flowtech lt for ls1. if there is enough incentive and interest.

depending on price of longtubes for 00 trans am do they have a catted y pipe? hows the ground clearance with tehse and do they hit the botom of the car?

I'm interested in LT's for my '00 Z...just the headers, not the Y, I got emissions I gotta pass :mad:

MORE PEOPLE!!!!

I would be in for coated headers with no emissions and a y-pipe.

id be in for 3rd gen shortys w/ y pipe oh yea no emissions

i may be in on some coated long tubes for a ls1......depends on the discount.....and maybe on a y pipe if all of this will hook up to a slp loudmouth

Any ideas as of what we can do Tom?

im still in so far.

looks like plenty of interest, we just need someone to give us a price, oh and can we get a catted y pipe for these longtubes? if so how much

I've been hammered today so I'll try to work on this in the morning. I need to see if they have headers for the LT1 and 3rd gens. It looks like there are only 5-6 possible orders for the LS1 but we may be all set if the other two are covered.

Thanks,
Tom

I'm also interested in LT headers and a y-pipe for 98 LS1.
.

I am still in.

Just waiting for a call back from Holley to get the rundown on what they have for the LT1 and 3rd gens.

i might be interested, however i dont know anyhint about them, i have a 97 z28 with the LT1 but i have no clue what kind of headers i would want or need or whatever... anyone able to help me? like i said, if i knew more i might be interested

I'd like to see what sort of discount we can get on the Flowtech header/y-pipe combo. Regular price is in the $600 range isn't it?

if tom gives us a good enough deal i will be in for headers and y pipe, does this company have a catted y pipe? if i get their non catted y pipe could i just have cats welded in place would that work? thanks

Originally posted by bluecmaro96
if tom gives us a good enough deal i will be in for headers and y pipe, does this company have a catted y pipe? if i get their non catted y pipe could i just have cats welded in place would that work? thanks

I'm not an exhaust expert by any means but I would think a good exhaust shop would be able to fab some cats up to the y-pipe some how. It may take some time to find a way to tuck them under there though.

If I have to get an ORP then I plan on at the very least having the stock cats gutted, have a pipe ran through the center then welded in to place on the ORP. I know it'll take some time to get it done but I believe if I go to the shop I went to when I had the exhaust off my '93 T/A welded up to the Camaro then I believe it can be done. I'm mainly worried about passing a visual inspection of a VA state cop happens to pull me over. I've only heard of them doing that one time before and that was a to a friend in his '94 Z... pulled him over for running just a Y-pipe off the I-pipe. The officer got under the car and checked to see if the cat was in place or not.

any new news on a price for the flowtech coated longtubes and y pipe for 00 ls1? hopefully its better than 600+ that thunder racing sells

Does Flowtech make LT1 headers? I've only seen the LS1 version.

FlowTech has headers for the LS1 and some of the 3rd gens but nothing for the LT1 cars.

Here is something that might help all of you. We're offering 10% off all FlowTech and Hooker headers this week so there won't be any GP required for this savings. The FlowTech products don't cost to much so there isn't much $ in them. This will probably be the best way to go.

Hope this helps,
Tom

so the best you can do on 00 flowtech headers is 342.00+ shipping :( too bad you cant do a gp deal

These headers aren't that expensive so they don't have as much $ in them for a larger order like some of the $1200. packages.