InjectedSS 02-11-2004, 07:13 PM Well I took the time to type a review of all the damn clutches i've been thru and what I thought about them... Hopefully this will help you guys out in deciding on what will be best for your next clutch purchase.. :)
Just CLICK HERE (http://members.aol.com/injectedss/fbodyframe.html) and then click CLUTCHES on the left side of the page. The rest of the F-Body page is still under construction so I will have lots of other stuff in there here in the next week or so :)
Any questions please feel free to ask..
thanks
chpmnsws6 02-12-2004, 03:14 AM y not delete this and bump your old one?:confused:
InjectedSS 02-12-2004, 07:36 AM Originally posted by red91tsiawd
y not delete this and bump your old one?:confused:
Cause I deleted the old one. Thankyou drive thru :D
30thCamaroZ 02-12-2004, 03:30 PM Thanks for the info. I was planning on going with a Stage 4 or a Mcleod Single Disk but not sure which yet. Probably the stage 4 though.
chpmnsws6 02-12-2004, 03:48 PM Originally posted by InjectedSS
Cause I deleted the old one. Thankyou drive thru :D
don't get snippy with me, your the reason i have a spec stage 4 sitting next to me :metal:
InjectedSS 02-12-2004, 06:07 PM Originally posted by red91tsiawd
don't get snippy with me, your the reason i have a spec stage 4 sitting next to me :metal:
LOL NICE :D BLING BLING :thumb:
Stage 4 is the $hit. Your gonna love it man. NO MORE SLIP :D
Did you get the upgraded hyds too? I know how crappy those LS1 hyds are ;)
chpmnsws6 02-12-2004, 10:16 PM yep, fully upgraded
2ZPOINT 02-19-2004, 07:32 AM Is there any chatter with the stage 4..
SVT Killer LV 02-19-2004, 10:07 AM I fear the broken dampner springs of the stage III, Stage IV is on the way to my house...
good write up prision whore
Shred 02-19-2004, 02:35 PM I'm seriously thinking about getting a stage IV after reading this. What are hyds? I have a '94 Z28. Does the stage IV chatter a lot?
SVT Killer LV 02-19-2004, 06:50 PM Originally posted by Shred
I'm seriously thinking about getting a stage IV after reading this. What are hyds? I have a '94 Z28. Does the stage IV chatter a lot?
upgraded hydralics applies to the POS hydraulics that they put in LS1's... We are ok, unless you go to a McLeod setup...
InjectedSS 02-20-2004, 03:56 PM Originally posted by Shred
I'm seriously thinking about getting a stage IV after reading this. What are hyds? I have a '94 Z28. Does the stage IV chatter a lot?
Nope no chatter at all :)
Klypto 02-20-2004, 09:19 PM how much are the upgraded hydros? and where to buy them?
chpmnsws6 02-21-2004, 09:54 PM Originally posted by Klypto
how much are the upgraded hydros? and where to buy them?
gmpartsdirect.com is the site i think
i saved over 150 going there :D
Klypto 02-21-2004, 10:20 PM i may be retardedm but cant find them on gmparts....
FacelessZ 02-22-2004, 02:51 AM Anyone ever have a local spring/clutch shop build a custom clutch? My buddy has, I believe, 4 kevlar and 2 copper on his clutch...he says it works better than any aftermarket clutch he's used and it was only $350 for the entire setup (clutch, p/p, etc) Im looking more into this option rather than an off the shelf clutch for $500+...
MadMaxz28 02-22-2004, 10:17 AM http://www.clutch-shop.com/
this guys knows his stuff! ask for Richard
chpmnsws6 02-22-2004, 10:19 PM Originally posted by Klypto
i may be retardedm but cant find them on gmparts....
you need to know the part numbers. i don't have them off hand nemore but if you search in the ls1 section, i asked in there :thumb:
MadMaxz28 02-22-2004, 10:38 PM hey how much was the stage 4 disk by itself?
InjectedSS 02-29-2004, 12:34 AM Originally posted by MadMaxz28
hey how much was the stage 4 disk by itself?
Dunno, call pete at SPEC and ask him :D
Klypto 02-29-2004, 12:44 AM i just received my stage III spec and flywheel (billet steel) it was 21.2 lbs i weighed it on very acurate scale
gheres links to the pics...
http://members.cox.net/binkyboy88/ClutchApart.jpg
http://members.cox.net/binkyboy88/ClutchApart4.jpg
http://members.cox.net/binkyboy88/ClutchApart2.jpg
Spec stage III and Billet Steel flywheel
InjectedSS 02-29-2004, 05:08 PM Originally posted by Klypto
i just received my stage III spec and flywheel (billet steel) it was 21.2 lbs i weighed it on very acurate scale
gheres links to the pics...
http://members.cox.net/binkyboy88/ClutchApart.jpg
http://members.cox.net/binkyboy88/ClutchApart-(4).jpg
http://members.cox.net/binkyboy88/ClutchApart-(2).jpg
Spec stage III and Billet Steel flywheel
Last two pics are NO WORKY!
Klypto 02-29-2004, 09:31 PM worky now... i had to make -(4) to jsut 4, b/c on this other board im on, it wouldnt let me have the -( ).... so forgot to edit it on htis...
|