Targa tops pics *copy of lounge post*

Here is my post from the lounge

Yesterday I was witness to I believe the first Targa Top conversion to a 4th Gen F-body. Its is Whistler's car. I have a few pics of the first stage, they were takin with a digital camera at night after it was done. When the pictures of the process are developed I will post them. The day started with the welding of the boxed subframes, then the removal of the T-bar. The car feels more sturdy with the subframes and no T-bar, than it did with just the T. There was no vibration, no windshield shake, no rattles, and no extra wind noise. We drove back with some full throttle blasts, and 80 mph highway driving talking the whole way. Whistler was actually standing at the top of the windshield with the T bar removed and the thing never flexed noticably. The skeptics that said it wouldn't make a difference over the T-tops were dead wrong. The car feels like a vert from the front seats. The car should be finished soon with the carbon fiber top, I'll post pics as soon as its done. Please excuse the electrical tape, it was used to keep the headliner fro flapping until the new one is put in. The red Z pics are of my wreck last week so don't mind them. I'm counting down the days till I chop my T- bar out.

http://community.webshots.com/album/39613537IsXsoN

This may sound like a stupid question http://web.camaross.com/bb/biggrin.gif but...

How do the t-tops go back in? I mean how is the inside edge supported after you lock them back in place. Or did you fabricate something else to replace the t-tops.

One piece carbon fiber roof, molded to the glass less T-top latches.

This sounds like a great idea, but where do you store the top? That would be the only problem I would have with it - not being able to use the t-top rack.

------------------
'95 Camaro Z28 A4
Oynx Black, 3.23 gears, T-tops, RKSport CA-300 ground effects, 17X9.5" polished 2000 C5 wheels on P275/40R17 BFGoodrich g-Force T/A rubber, Flowmaster 80 Series exhaust with chrome rolled edge quad tips, aftermarket two-tone leather seats (got the original cloth ones recovered), "diamond clear" clear corners, blackouts on taillights, chrome CAMARO letters on rear and "chrome" painted Z28 logos (looks like shiny silver) and vents on the hood, 97+ Camaro console, interior changed from Light Gray to Dark Gray.
My Camaro webpage (http://mychevycamaro.tripod.com)

First, check Brent's Appearance Guide (http://www.bfranker.badz28.com/appearance) then check
SuperDave's supplement Appearance Mods pics (http://community.webshots.com/user/superdave479) for more 4th gen F-Body pics.

I would say in the Back seat folded down. The same place people with subs in the trunk put the T's.

Any updates???
Nick

------------------
1999 Camaro SS #3467
Bright Red (aka - "Radar Red") - A4
Some mods...hehehe
See pics:http://community.webshots.com/user/inssane
Nick - "Is that a John Deere or a Toro?"
Ricer - "#%^&#&*!!", Buuuurrrrr, clunk, Buuuuurrrrr

I wonder if a C4 corvette top would fit that camaro

------------------
1993 Z-28
13.7s@99.97mph
SS hood
Rockford: amps, and sub
Cadence: EQ, and CAP 1.0
BM Quart: components
Pioneer: Head Unit
100% self-install
http://www.tereschubert.com/camaro

I dont know... but I would maybe concentrate on making a removable t-bar instead of just removing it completely. Im not sure how it would be done, but if you can make it so you can unlatch the t-bar when you take the t-tops off, then you could still easily store them in the hatchback along with the tbar...and that way you wouldnt have to have a targa top custom made.... I dont know Im just rambling out an idea.
btw, nice work on the one you have done, it looks alright

------------------
My 2 Babies:
94 black Z28-5.7 k&n cold air induction, performance MAF,air foil & flowmaster exhast. new pics w/ SS hood & spoiler.Custom hvac&light covers and custom storage bin covers for sale
94 Z28 pics (http://community.webshots.com/user/reznorz28)
86 laser red IrocZ - k&n air filters,full msd setup, flowmasters, modifed MAS & air foil,92 hood, Ground Effects & spoiler
86 Z28 (http://www.boomspeed.com/logan/MVC-194F.JPG)

It's done, I've got to get JP to post some more pics for me.

------------------
Chris
67 Camaro 357 CI SpeedPro EFI single T70BB turbo Tremec TKO
99 Z28 M6 Targa Roof
House of Kolor "Hot Pink Pearl".. bolt-ons,Comp XE-R dual pattern, Macs, duals,NOS...20" Intense' w/BFG g-Force KDW

Yeah, can we see some pics of the overall view ? Not jus up close... but how it looks from a little further back ?

------------------
~Black 95 Z A4 Convert~
View My Modlist (http://images.cardomain.com/installs/206000-206999/206298_77_full.jpg)
P t ' s w e b p a g e (http://www.tc.umn.edu/~boatm005/)

Let me be the first to say that I've seen it and it looks absolutely awesome. I actually haven't seen the finished product (he still had to paint it last time I saw it), but it still looks good. He also did a nice job on the front part of the headliner.

Holy thread ressurection. I will get hold of Chris to take some pics and post them as soon as I get back from vacation if he doesn't post them sooner.

I'm in no real hurry to post the pics, JP... the rest of the car looks like ass. But if we get together, you can take some closeups of the roof, show the carbon fiber panel, and the headliners.

My GFX will be here the beginning of Sept. then I'm spraying the whole car Ferarri Titanium.

It's got a bunch of cool mods I'm dying to show off, just waiting on paint.

Custom made rear floorboards to tuck in dual Flowmasters, H-pipe, and 2.5 over the axles with modified 87-93 LX mustang chrome tailpipes.
Carbon fiber Cowl hood with matching targa top.
Custom chopped and lowered nose with C5 turn signals, side markers and integrated GFX
Shaved antenna, key holes and 3rd brake light
Solid red taillights.
Nitrous purges from the tips of the mirrors.




------------------
Chris
67 Camaro 357 CI SpeedPro EFI single T70BB turbo Tremec TKO
99 Z28 M6 Targa Roof
House of Kolor "Hot Pink Pearl".. bolt-ons,Comp XE-R dual pattern, Macs, duals,NOS...20" Intense' w/BFG g-Force KDW

You have a C5 front clip ? or just C5 turn signals ?

------------------
~Black 95 Z A4 Convert~
View My Modlist (http://images.cardomain.com/installs/206000-206999/206298_77_full.jpg)
P t ' s w e b p a g e (http://www.tc.umn.edu/~boatm005/)

Thats cool man, my car isn't exactly lookin too good right now either. I pulled it apart waiting for the 98+ bumper, but now the guy said he's having shipping problems. SLP is on about a 6 week wait for Ultra Z hoods. Give me a call whenever you feel like taking pictures of the car.

I have part of a C5 bumper (the part with the signals) sectioned into my bumper.