t/a seats in a camaro

hey guys i put some white 97 ta seats in my white droptop. prob is i am missing what i believe to be a "power seat module"? from my car i have a two prong plug (orange and brown) the trans am seats have a 6 prong plug(orange,brown,white,grey,purple, and another color) am i missing the part that hooks these together?

Henry

------------------
97 #150 convertible, wolfe racecraft 6 point roll cage, 97 ss white 16" 30th rims, slp stage 1 suspension, accel 300+ dig. ign. http://camaroz28.cardomain.com/member_pages/view_page.pl?page_id=178062

Your not missing anything, the firebird has more power motors in the seat for the lumbar and stuff. Thats what the extra wires are. Just run a hot and a ground, or better yet figure out which is which with a ohm tester. Then just wire it.

------------------
Arrest ME Red 1994 Camaro Z28 Convertible
just a chip and a muffler, well maybe some headers
<A HREF="http://home.attbi.com/~mycamaro/" TARGET=_blank>
First run EVER
R/T - .675 (on a pro tree)
60 FT - 1.943
1/4 - 13.969 @ 98.77
http://home.attbi.com/~mycamaro/</A>

yeah but i want the seats to work like they were designed. i wanna beable to make them work fully

Henry

They will work as they are suppose to, just put some power to them.

Viper

so just leave the other 4 alone?

Henry

hey guys what do you think?

Henry

Dude, I work at a salvage yard. I know for a fact they will work. Quit worring about the little plug and just wire them. In the amount of time you spent here you could already have them working http://web.camaross.com/bb/rolleyes.gif

just hook the orange to orange and brown to brown? and leave the others alone? the wiring diagram that i have says that the other wires go to the inflate and deflate sides of the motors or valves

Henry

i just dont wanna mess up my new seats

ttt please guys some one has to know

I thought there were 5 wires total, not 6. Anyway, hook the orange and brown to the power wires in your car like others have said.

Now go look at the harness on the passenger seat. All the other colors will be in that harness. Connect those to the corresponding colors on the driver seat.

Long story short: Except for the power & ground wires, everything else goes to the passenger seat.

------------------
The IROC Homepage (http://iroc.fbody.com)
View the Restoration of an 85 IROC (http://www.rit.edu/~jli4307/camaro)
Weekend projects aren't.

thanks that makes more sense. i guess i just need the wiring harness from one seat to the other

Henry