How hard is it to install a complete n2o system?

I have the 5177 kit, MSD window switch, bottle warmer and bottle opener and soon to get a retard box. How many hours will this take and how hard is it to install? Any tips? Thanks

how many hours depends on how meticulous you are. the neater you make t,the longer it takes.

experienced person could pull it off in a few hours,beginners plan a day.

unhook your battery...you'll be fine then.

use spit loom so it looks nice

not hard, just time consuming to get it nice and neat. Also, my tip to you is to make sure all your connections are soldered and they are all 100% up to spec. You don't want any wiring problems, better to do a good job first them to get hard to diagnose problems in the future as well as catastrophic failures if for example the fuel solenoid failed to function due to faulty wiring. Good luck

Brian

Yeah, make sure your ground wires are good too...when it gets cold sometimes the ground doesn't work too good if it's not on a good connection. I know this from experience :)