I'm looking for a few parts for my 350 buildup. Can be new or used, as long as they are in good condition.

-stepped headers 1 3/4 - 1 7/8 w/ 3' collector
-Edelbrock Victor jr. 23 degree heads for roller cam - 64 cc (part # 77599)
-gear drive timing gears
-internally balanced harmonic balancer for 350
-800 cfm chokeless carb
-electric water pump
-distributer
-new roller rockers 1.5
-new roller lifters
-12:1 compression forged pistons w/ 64 cc heads (4.03 bore 3.48 stroke 5.7 inch rods)
-5.7 inch connecting rods for 500 hp

Thanks a lot for looking.

 

i have a 750 cfm holley with vacume secondaries if itd be something your interested in. i used it about 5000 miles just pulled it off the car less then a week ago to go with a smaller carb for better miliage.

 

I have an HEI distributor. Let me know if you're interested.

Thanks,


Steve.