Black97Z
06-16-2002, 03:03 PM
I've had a bit of a shift in my priorities, so I was hoping one of you local guys would like ta take this stuff off my hands.
this stuff cost me close to 3800, and most of it is still new
MSD 6al with harness adapter for easy install on 96/97- new in box - 200
Lucas 42# injectors - used (excellent condition) - 250
A-pillar + pod (new, painted graphite)
autometer Sport-Comp boost guage (new)
automoter Sport-Comp 270* electric FP gauge (new)
150 for all 3... they will come with all wiring and tubing, etc
ATI P600B head unit (used 15k then reconditioned)
ATI Twin high flow intercoolers (new)
the SC comes with almost everything you will need to get it installed as per the instructions.
You might need to buy some coolant hoses, hoses for rerouting the air pump, spacers for the fans, etc.... very minor stuff.
Things included will be all the brackets, their mounting hardware, clamps, 7# and 8# pulleys, belts, instructions, all the tubing for the intake and intercoolers, oil lines, FMU, fuel pump... etc.
Looking for 2400 for that stuff, or if you're not too far I'll deliver EVERYTHING for 2800.
If you have any questions, e-mail me at matthew@norgren.org I should respond pretty quickly during the day. If you're interested in something specific, I can take pictures.
[This message has been edited by Black97Z (edited June 16, 2002).]
this stuff cost me close to 3800, and most of it is still new
MSD 6al with harness adapter for easy install on 96/97- new in box - 200
Lucas 42# injectors - used (excellent condition) - 250
A-pillar + pod (new, painted graphite)
autometer Sport-Comp boost guage (new)
automoter Sport-Comp 270* electric FP gauge (new)
150 for all 3... they will come with all wiring and tubing, etc
ATI P600B head unit (used 15k then reconditioned)
ATI Twin high flow intercoolers (new)
the SC comes with almost everything you will need to get it installed as per the instructions.
You might need to buy some coolant hoses, hoses for rerouting the air pump, spacers for the fans, etc.... very minor stuff.
Things included will be all the brackets, their mounting hardware, clamps, 7# and 8# pulleys, belts, instructions, all the tubing for the intake and intercoolers, oil lines, FMU, fuel pump... etc.
Looking for 2400 for that stuff, or if you're not too far I'll deliver EVERYTHING for 2800.
If you have any questions, e-mail me at matthew@norgren.org I should respond pretty quickly during the day. If you're interested in something specific, I can take pictures.
[This message has been edited by Black97Z (edited June 16, 2002).]