Complete NOS Direct Port Sportsman Fogger Nitrous Kit
Complete NOS Direct Port Sportsman Fogger Nitrous Kit
I purchased this NOS Sportsman Fogger Direct Port nitrous kit from another member of the Board (BrianZ28) and won't be using it on my car. I am running AFR 220cc LT4 heads which require an LT4 intake and this kit is already plumbed using an LT1 intake.
This kit is complete with ported LT1 intake that has had the runners ported and opened to 58mm. The intake is drilled and tapped for the individual nozzles. Pics of the assembled setup are linked below. The intake has approximately 2500 miles on it with the nitrous installed but the nitrous has never been hooked up or even sprayed.
Kit Includes:
Ported LT1 intake
Nitrous Oxide Systems Sportsman Fogger Nitrous Kit
All necessary braided fuel and nitrous lines, 17? nitrous line to bottle
10lb NOS Nitrous bottle with Super Hi-Flo valve and Bottle blanket
Bottle Brackets
Wiring, Relay, WOT Microswitch for activation
Prebent individual nitrous and fuel lines to each runner
Additional jets for 125/175/225 hp
With the included solenoids, kit is adjustable from 100-300hp. It is a very nice kit and the price I am asking is far below what NOS wants for the kit new in addition to the cost of bending and installing the lines/plumbing the intake. I am not interested in separating any parts of the kit. Please email if you have any further questions. I am asking $550 SHIPPED or best offer. Thanks.
Link below to pics:
http://community.webshots.com/album/109906548ITxRhC
This kit is complete with ported LT1 intake that has had the runners ported and opened to 58mm. The intake is drilled and tapped for the individual nozzles. Pics of the assembled setup are linked below. The intake has approximately 2500 miles on it with the nitrous installed but the nitrous has never been hooked up or even sprayed.
Kit Includes:
Ported LT1 intake
Nitrous Oxide Systems Sportsman Fogger Nitrous Kit
All necessary braided fuel and nitrous lines, 17? nitrous line to bottle
10lb NOS Nitrous bottle with Super Hi-Flo valve and Bottle blanket
Bottle Brackets
Wiring, Relay, WOT Microswitch for activation
Prebent individual nitrous and fuel lines to each runner
Additional jets for 125/175/225 hp
With the included solenoids, kit is adjustable from 100-300hp. It is a very nice kit and the price I am asking is far below what NOS wants for the kit new in addition to the cost of bending and installing the lines/plumbing the intake. I am not interested in separating any parts of the kit. Please email if you have any further questions. I am asking $550 SHIPPED or best offer. Thanks.
Link below to pics:
http://community.webshots.com/album/109906548ITxRhC
Mail returned to all those who inquired.
Derrick, long time no hear man. My motor is being finished up at Thunder Racing as we speak. There has been a holdup w/ AFR as they had 6-8week wait on their heads over the winter season. You would think they would stock up for spring. The motor should be done and in the car in March.
Derrick, long time no hear man. My motor is being finished up at Thunder Racing as we speak. There has been a holdup w/ AFR as they had 6-8week wait on their heads over the winter season. You would think they would stock up for spring. The motor should be done and in the car in March.
I believe I have responded to everyone involved. Please email again if not. Thanks.
Omar, I'll probably just use a simple nozzle kit, maybe try and go stealth and hide it. I'm not going to spray more than a 150-175 shot anyway as the car should make more than enough power on motor. BTW, thanks for the kind words.
Omar, I'll probably just use a simple nozzle kit, maybe try and go stealth and hide it. I'm not going to spray more than a 150-175 shot anyway as the car should make more than enough power on motor. BTW, thanks for the kind words.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 1, 2014 08:08 AM
Speeds8erM-1
Drag Racing Technique
6
Jul 18, 2002 11:36 PM



