ATI Twin-intercooled D1SC Procharger and 72 lb/hr injectors

Thread Tools
 
Search this Thread
 
Old Jan 1, 2004 | 11:40 AM
  #1  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
ATI Twin-intercooled D1SC Procharger and 72 lb/hr injectors

I may be parting with my blower setup pretty soon. The kit was purchased a few years ago but has a total of about 6,500 miles on it. It was originally a P1SC but was upgraded last year. The blower as a D1SC has seen fewer than 900 miles (I toasted the motor and it's been in the garage since then). I may be willing to have the top(visible) portions of the intercooler tubing powdercoated to bring it back to the original look. It comes with everything you would need to install it on a '94-'97 LT1 less the booster pump. I may have it in the garage but I'm not sure. I also have 3 pulleys that go with it that on a stock motor should make in the neighborhood of 8 lbs, 12 lbs, and 15 lbs/boost. I made 15 lbs on a 383 at 5,900 RPM with the last pulley.

I also have 72 lb injectors that I won't be needing.

I paid $4,595 for the blower setup(I bought it directly from ATI so I didn't have to wait for it for six months). I am thinking of selling it for $2,850. The injectors were like $550. I'm thinking $400 is a fair price. I'm not sure that I'm open for trades but I'll consider all offers.

E-mail is bmillz@msn.com
cell phone is 210/601-9502
Old Jan 1, 2004 | 12:41 PM
  #2  
bp's95formula's Avatar
Registered User
 
Joined: Feb 2003
Posts: 117
From: San Diego California
Sent u mail.
Old Jan 1, 2004 | 02:03 PM
  #3  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
Replied

You have mail.
Old Jan 3, 2004 | 12:55 PM
  #4  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
ttt
Old Jan 5, 2004 | 09:32 PM
  #5  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
The blower and intercoolers are SOLD.

The 72 lb injectors are still for sale. They have less than 100 miles on them. I was asking $400 for them, they were close to $600 new. I'll take $350.
Old Jan 5, 2004 | 10:15 PM
  #6  
GT40MkI's Avatar
Registered User
 
Joined: Nov 2000
Posts: 152
From: CC, TX
Originally posted by Slo-ride
The blower and intercoolers are SOLD.

The 72 lb injectors are still for sale. They have less than 100 miles on them. I was asking $400 for them, they were close to $600 new. I'll take $350.
what kind ?
Old Jan 5, 2004 | 10:16 PM
  #7  
GT40MkI's Avatar
Registered User
 
Joined: Nov 2000
Posts: 152
From: CC, TX
wanna sell the fast
Old Jan 6, 2004 | 06:58 AM
  #8  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
I'm embarassed to say..........I can't remember. Siemen's? Delphi?

http://groups.msn.com/Slorides1997Po...oto&PhotoID=30

There's a pic of them. The white band around the middle is the name of the vendor, although I can't remember who it is. I took the car to a buddy's shop last night. I'll have him pull one today and see what it is.

The F.A.S.T. is NOT for sale.

Do you have any idea how long it took me to wire that damn thing? Yes, I wired it. No harness. I'm being buried in the car WITH the F.A.S.T. and my laptop............so as to continue my tuning edumacation in the afterlife..........
Old Jan 6, 2004 | 07:59 PM
  #9  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
They are from Creative Performance Racing:

http://www.cprracing.com/prod02.htm

They are Delphi or Seimens. I can't say for sure. Seimens are $76 per and Delphi are $78 per. Not a big difference in price. But now that I have refreshed my memory and know what I paid for them, and knowing that they're practically brand new, my $350 offer is WITHDRAWN. $450 FIRM.
Old Jan 10, 2004 | 02:01 AM
  #10  
GT40MkI's Avatar
Registered User
 
Joined: Nov 2000
Posts: 152
From: CC, TX
Originally posted by Slo-ride
They are from Creative Performance Racing:

http://www.cprracing.com/prod02.htm

They are Delphi or Seimens. I can't say for sure. Seimens are $76 per and Delphi are $78 per. Not a big difference in price. But now that I have refreshed my memory and know what I paid for them, and knowing that they're practically brand new, my $350 offer is WITHDRAWN. $450 FIRM.

damn i woud of bought them for $350

ohh well to bad about the fast
why did you not piggy it ?
Old Jan 13, 2004 | 05:53 PM
  #11  
Slo-ride's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 375
From: San Antonio, TX
I still have them if you're interested. Make me a reasonable offer. And no, I won't take $350 for them.
Old Jan 13, 2004 | 06:40 PM
  #12  
ford's Avatar
Registered User
 
Joined: Apr 2000
Posts: 1,793
From: Austin, Texas...Y'all! :)
Well maybe now with a new set-up you can actually take me in a race.. ok well maybe not, you still have to learn how to drive

ttt
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
13qtr
Parts For Sale
24
Oct 28, 2016 08:11 PM
RUENUF
Cars For Sale
6
Mar 13, 2016 03:37 PM
plattted
Parts Wanted
1
Sep 13, 2015 07:17 AM
plattted
West South Central
0
Sep 7, 2015 02:45 PM
95blkss
Parts For Sale
0
Jul 13, 2015 01:28 PM




All times are GMT -5. The time now is 12:45 AM.