Some good stuff for sale (3rd and 4th gen)

LPE 1000cfm throttle body for TPI/LT1, comes with all this stuff for $325 (the TB alone is $560 new without twin inlet, TPS, IAC, filter, etc)):
http://www.wideopenwest.com/~mpiquero/images/P8260713.JPG


58mm nitrous plate with twin fogger nozzles for SOLD
http://www.wideopenwest.com/~mpiquero/images/PICT0026.JPG

MSD Billet Distributor includes bronze gear and extra cap, SOLD, looks like this:
http://store.summitracing.com/partdetail.asp?part=MSD%2D8366


Mallory 685 Digital Ignition with GM harness. Brand new in box. Has all the goodies for nitrous or boost. It's like $500-$600 in MSD stuff, but it's all in one box and menu driven Will NOT work on LS1 $200
http://www.centuryperformance.com/detail.a...duct_id=MAL-685


ARP SBC head studs (not bolts). Should work on any gen 1 or gen 2 SBC (including lt1). New in the box. $100

Cloyes Double Roller timing set New...sold

Meziere electric water pump already mounted in wp housing, ready to bolt on. $100 plus your working pump.

Everything is either new or in great shape. Trades always considered. I can take more pics if you need them

would that 58mm plate work with my accel 58 mm throttle body and my miniram on my tpi car? my stock nos plate setup is quite restricting.

Originally posted by kandied91z
would that 58mm plate work with my accel 58 mm throttle body and my miniram on my tpi car? my stock nos plate setup is quite restricting.

It should since it was behind the 58mm TB I have for sale up above. It is bored for 58mm

is there any chance you still have the lpe tb?


Thanks
Robbie
1fas92