College Station/Bryan Roll call

Hey who all here is from the CS area? I've noticed two or three people so far.

I would ask what your f-body looks like so I could keep an eye out, but since there are sooo many here, thats just about pointless unless you have some significant body mods. lol

Oh yeah, I drive a white/burgandy '86 Monte Carlo SS. The one that USED to be really loud... http://web.camaross.com/bb/smile.gif

I drive the Black 1997 Z28 with the Harwood cowl hood.

------------------
Chris "Ace"
'97 A4, Flowmaster, 160*stat, Harwood Fiberglass Hood, Hooker Longtubes and off-road y-pipe, K&N Oil Breather, Dual K&N conical CAI Filters.
Best- 1/8th - 9.023 @ 77mph
"Welcome to the themepark of the future. Where nothing can possiblie go wrong."

I drive a marron Z28 with chrome G2 world challenge wheels. See you around.

Joe

Pics of mine are in the sig.

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

<font face="Verdana, Arial" size="2">Originally posted by Joe Gee:
I drive a marron Z28 with chrome G2 world challenge wheels. See you around.

Joe</font>

Does your car have the G2 stickers where the Z28 used to be?


------------------
1986 Monte Carlo SS (http://www.geocities.com/mcss86_99)

<font face="Verdana, Arial" size="2">Originally posted by mcss383:
Does your car have the G2 stickers where the Z28 used to be?

</font>

Nope

I drive a red 97 Z28.

------------------
1997 Bright Red Z28
A4, 3.23's, K&N FIPK, FLP Headers, Flowmaster, Cutout
My Z28 (http://www.freewebz.com/evilbox)

'85 blue iroc w/ two white stripes
it's the loud one that's slow!!
im on campus though, so i only drive around town 3 or 4 times a week and im going home to dallas next week.

hey evilbox, i'm pretty sure you're the guy i was racing at navasota last semester and followed home. do you still have the stock exhaust pipes in back or do you have ANY pipes in back? cause i think i saw you around town last week.

see you guys around,
kyle

p.s. - finals suck!! http://web.camaross.com/bb/mad.gif

------------------
1985 Blue Camaro Iroc-Z28 LB9 305 TPI 700R4 (3.23)
Crane PowerMax(CompuCam) 204/214, .423/.446, LSA 110, summit double roller, !AIR gone, chopped air boxes, K&N's, airfoil, !MAF screens, NGK plugs, Hypertech thrown away, shift kit, highflow cat, flowmaster 80 series, poly's all around, great sound system

1/4 mile w/ an intermitant miss: 15.40 @ 89.44mph
Alot more plans for the summer!!

white firebird w/ gfx and 17" chrome WS6 style wheels, red reflective concepts decals



[This message has been edited by 99v6whitebird (edited May 03, 2002).]

Wow, a lot of people from CS.

------------------
1986 Monte Carlo SS (http://www.geocities.com/mcss86_99)

<font face="Verdana, Arial" size="2">Originally posted by KyleBlue85Iroc-Z:

hey evilbox, i'm pretty sure you're the guy i was racing at navasota last semester and followed home. do you still have the stock exhaust pipes in back or do you have ANY pipes in back? cause i think i saw you around town last week.
</font>

Yeah, I remember you Kyle. What have you been up to lately, I haven't seen you at Nasty or the meetings since then. I guess I've only been a few times also since then though.

Yep, I'm still running the stock tailpipes on my car (they're kind of tucked up and hidden), I can't decided if I want to keep my car looking stock or get some new tailpipes.

------------------
1997 Bright Red Z28
A4, 3.23's, K&N FIPK, FLP Headers, Flowmaster, Cutout
My Z28 (http://www.freewebz.com/evilbox)

[This message has been edited by EviLBoX (edited May 03, 2002).]

cool, i thought that was you. stock or different looking, hard choice. either way im sure it would look good! i haven't shown up to much this semester cause it's been a hard one. stupid classes!!

I drive a 1998 white TransAm with black pinstripes along the sides and black accents on the nose, door letterings, and black pontiac.....also loud as hell http://web.camaross.com/bb/biggrin.gif

I will be staying in town over the summer, but will spend alot of time in Houston partying with my brother in his new apartment.

Chris-
a ha, I see you all over.. didn't realize you were on this board.

------------------
-94 Black T-Topped Z28 M6, 10s, and daily driven!
-96 CBR F3, modded of course
-92 Talon Tsi AWD, also too many mods..
-99 Tony Kart :)
http://www.fastblackcar.com (http://www.velocityracing.com/camaro)

Northwest Houston, gonna go street race with the "big boys" this summer http://web.camaross.com/bb/biggrin.gif

hope to get some quality time at HRP aswell...

hey chris, you staying in CS for the summer or going back to Beaumont?

[This message has been edited by PhatT/A (edited May 06, 2002).]

barring any trip or internship I'll be here alll summer. working at F-ing UCS. I'm gonna go apply at Red Lobster right now.

Man I walked into Red Lobster filled out an app and the y didn't even interview me, they just said they didn't want me.

anyhoo, don't know about any other place. they're about to increase my pay to 7.75/hr so maybe I'll stick around a little longer till something much better jumps up.

im always there visiting my gf...i have a pewter camaro with ground effects and tail light blackouts...its lowered with eibachs

------------------
99 Pewter Camaro/Sport Appearance package/A4
Flowtech muffler,Hooker dual dual tips, free ram air, K&N Filter, Whisper Lid, 1LE swaybar,
B&M Shift+, Clear Corners, rear blackouts, Sony CDX M600 headunit,2 Sony Xplod mids, 2 Sony Xplod 3ways, billet grill

I have a black 96 Z-28 with chrome salad shooters and lime green Z-28 emblems. Most people find me b/c I keep my cut-out open. Still not as loud as Phat T/A though (Get some exhaust Rick!!!!!!)

------------------
96 Z-28 Moroso CAI, Flowmaster, cut-out, TB bypass, air foil, GMS LCAs, Nitto 555R, LT4 KM, 1LE Intake Elbow
8.89 1/8 mile 2.08 60 ft with mods
AOL IM: jwc3382

2000 Navy Blue TA

Mike

------------------
'00 NBM TA A4 3.23

I'm down here this summer. I've got the Forest Green 92 RS convertible with the 17" Torq-Thrust II's on it.

Silver 00 Firebird with SLP HO Hood, red reflecs, B&B triflo and chrome Y2K vette wheels. See most of yall tonight (6/12).

Matt

You won't be seeing a red 93 Trans Am next year, didn't get in. http://web.camaross.com/bb/frown.gif Maybe in Fall 03 I can try.

------------------
93 T/A (http://transam672.tripod.com/)
More plans than mods

I'll be up there in about a month or so visiting a friend for the weekend. Keep an eye open for a pewter Z71 with a red sport bike in the back... Or just the bike (in sig.)

------------------
~KC

'96 Trans AM: The Project.
'98 Malibu: The Econobox.
'98 Honda Super Hawk 996: The DonorCycle.
Past Rides: 2001 Z71, '82 Suzuki GS1100, '81 Vette
AIM: HellHawk996

<font face="Verdana, Arial" size="2">Originally posted by JCason:
I have a black 96 Z-28 with chrome salad shooters and lime green Z-28 emblems. Most people find me b/c I keep my cut-out open. Still not as loud as Phat T/A though (Get some exhaust Rick!!!!!!)
</font>

LOL!
I finally got that exhaust not too long ago man, let me tell you, it is nice to finally be able to listen to the radio or carry a conversation with the person sitting next to you http://web.camaross.com/bb/biggrin.gif. I went with DR. Gas 3 inch true dual setup(X pipe) with dynomax bullets and turndowns, still loud eneough to scare the pants off of the competition but quiet enough to keep the popos off my back.
Rick

Hey everyone In B/CS come out to Krogers on southwest parkway Wed at 10:00PM! I want to see a lot of f-bods there. I am talking to you mike, jeremy, grant, brook, jordon, rick, raymond, blake, scott, chris, luke, joe, kyle, matt, and anyone and everyone else with a decent(not rice) car. Hope to see you then. Ps I ORDERED MY LONG TUBES TODAY!!! My car goes into the shop on thursday to get my new engine put in. See you all at car club!

I would go but I'm in Garland for the summer. If I'm down there for a wednesday though I will stop by.
Kyle

What's up fellows. I'm still here. Haven't made it to Dallas yet. I'll be here 'till I find a job in Dallas.

Scott

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: scoot95z@hotmail

<font face="Verdana, Arial" size="2">Originally posted by jimbo95Z28:
Hey everyone In B/CS come out to Krogers on southwest parkway Wed at 10:00PM! I want to see a lot of f-bods there. I am talking to you mike, jeremy, grant, brook, jordon, rick, raymond, blake, scott, chris, luke, joe, kyle, matt, and anyone and everyone else with a decent(not rice) car. Hope to see you then. Ps I ORDERED MY LONG TUBES TODAY!!! My car goes into the shop on thursday to get my new engine put in. See you all at car club!</font>

WHO ARE YOU!?!?! AAHHHH!!!

[This message has been edited by BLK97Z28 (edited June 18, 2002).]

Hey Brook, It is the guy with the supercharged chevy truck, and chris, I just saw your name on here, and wanted you to show up so that we can have a lot of f-bods out there like old times. My name is Aaron. Don't worry, I am not stalking either of you. See ya there.

<font face="Verdana, Arial" size="2">Originally posted by JCason:
I have a black 96 Z-28 with chrome salad shooters and lime green Z-28 emblems. Most people find me b/c I keep my cut-out open. Still not as loud as Phat T/A though (Get some exhaust Rick!!!!!!)

</font>

You still trying to sell your car? I just got my 95 Z28 for $6,200. If you are still looking for a truck, mine is for sale. See you at car club.

I'll probably be there this Wednesday, not much else to do in this town on a Wednesday night this time a year..... http://web.camaross.com/bb/frown.gif

Rick

I realize I drive a Ford but I was looking around on the site. I never realized there were this many F-Bodies in this town, at least in the summer.

------------------
1989 Mustang LX/Cobra

Z28, SS, T/A...They all taste the same.

You're selling your car Jeremy? What happened?

<font face="Verdana, Arial" size="2">Originally posted by jimbo95Z28:
Hey everyone In B/CS come out to Krogers on southwest parkway Wed at 10:00PM! I want to see a lot of f-bods there. I am talking to you mike, jeremy, grant, brook, jordon, rick, raymond, blake, scott, chris, luke, joe, kyle, matt, and anyone and everyone else with a decent(not rice) car. Hope to see you then. </font>

Apparently when you say "f-bods" you aren't reffering to thirdgen's. I was there last wednesday and the only person that would talk to me was a guy with an AMX. Guess I'll stay home this wednesday.



------------------
'92 Camaro RS Convertible, forest green, tan leather, LT1/T56, 1LE brakes & sway bars, "modified" eibach springs, polygraphite bushings, custom built subframes, and 4.10 gears.

<font face="Verdana, Arial" size="2">Originally posted by fredo92:
Apparently when you say "f-bods" you aren't reffering to thirdgen's. I was there last wednesday and the only person that would talk to me was a guy with an AMX. Guess I'll stay home this wednesday.

</font>

If you said hi to me I would talk to you. you can't expect to go up there, stand by yourself, and expect everyone to go and start talking to you. Introduce yourself to a few people, walk around, and people will talk to you. Nobody up there has any problem with third gens. Everyone's invited, but stay home if you want

[This message has been edited by jimbo95Z28 (edited June 19, 2002).]

WEll, I did try to talk to a couple of f body guys but they didn't really seem to give a crap that I was trying to meet them so that's what I was reffering to. It's not like I just stood up there with my thumb up my butt.

Dude that sux. Well dont let that keep you away. There are some nice guys up there. If I see you around this Friday or next Wed. I'll be glad to meet you.

Mike

------------------
'00 NBM TA A4 3.23

If you came up to me I would love to talk to you, any car...be it a mustang or third gen, whatever...as long as it aint rice I'll be more than happy to bs with! Try again this next Wednesday, I'll be next to a white t/a, I'm Rick.
By the way Cobra guy...whatever your name is, I notice your sig says t/a's, camaros blah blah blah they all taste the same...why dont you try me out...bet you that sig will change real quick...my t/a dont go down easy with slowstangs http://web.camaross.com/bb/biggrin.gif lol......white LS1 t/a with black pinstripes, gimme a holler next time you show up, we can line em up..... http://web.camaross.com/bb/biggrin.gif
Rick

You go Rick! I would like to see that. Damn that would be hella funny. And fredo92
I saw your car last night at Hastings in bryan, and you have a damn clean car. Sounds good too. It didn't come with the Lt1 did it? I have heard from some people that some 92's came with them, but I don't know. Hope to see you out there next time. and back to you rick, I want to see you run that purple supercharged cobra and see exactly how you two stack up. You might want to borrow some E.T.'s though. and get some damn suspension first.

no, 92's never came with LT1s, or 6spds for that matter. http://web.camaross.com/bb/biggrin.gif It originally had a 305TBI motor and an automatic. Yeah, I didn't stay at Hastings very long, some friends called and we ended up heading to Northgate to meet up with them. Maybe next week I'll stick around longer.

------------------
'92 Camaro RS Convertible, forest green, tan leather, LT1/T56, 1LE brakes & sway bars, "modified" eibach springs, polygraphite bushings, custom built subframes, and 4.10 gears.

Man that purple mustang is a joke, and it sounds like ****. I'll run him on et streets, nittos whatever, from what I hear his car is all hype. He shows up to car club on et streets and when some one calls him out he has some excuse why he doesn't want to race...BUT when a stock t/a or Camaro shows he wants a piece of it LOL....
I'm looking forward to this Sat night, me and Raymond and some other auto with spray are suposed to go out and run em, should be fun.
Rick

[This message has been edited by PhatT/A (edited June 20, 2002).]

I've never been up to Kroger's yet, just got my car out of the shop a little while ago. Is there a large variety or mainly f-bods?

And PhatT/A...I didn't mean to come up in here and start smack talking, just looking for some car guys to meet. I'll probably stop by there sometime soon. See ya then! http://web.camaross.com/bb/wink.gif

<font face="Verdana, Arial" size="2">Originally posted by tylercobra:
I've never been up to Kroger's yet, just got my car out of the shop a little while ago. Is there a large variety or mainly f-bods?

And PhatT/A...I didn't mean to come up in here and start smack talking, just looking for some car guys to meet. I'll probably stop by there sometime soon. See ya then! http://web.camaross.com/bb/wink.gif</font>


yea man its all good, just picking on ya http://web.camaross.com/bb/tongue.gif lol
I always love a good race, see ya next week!
Rick

Yeah! Don't listen to Rick.... He just likes to talk sh*t. hehehehe!!! Just kidding Rick.

Anyways Rick, I talked to Duane today (the guy with the blue foxbody, solid roller 347) and he said that he is waiting for his new fuel pump to come in adn then he will be out. He dynoed and on motor he put 403 to the ground but at about 5200 his fuel starts dropping fast. So he is going to put the new pump on and hope for about 425-430 to the ground. Anyways He said that he will try to get out tomorrow so that you can see his car.

Scott

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: scoot95z@hotmail

sounds good Scott, I am looking forward to checking that beast out. I have heard alot about that car!
Rick

Hey Scott,
just wanted to let you know that the weight reduction that we did on the T/A Sunday musta been quite a bit.....man if I downshift now no matter how high of a gear I am in the rear wants to come around bad....I know this aint good for 1/4 mile times but man is it fun! http://web.camaross.com/bb/biggrin.gif
now to get some suspension and to take off some more weight.......
Rick

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
Hey Scott,
just wanted to let you know that the weight reduction that we did on the T/A Sunday musta been quite a bit.....man if I downshift now no matter how high of a gear I am in the rear wants to come around bad....I know this aint good for 1/4 mile times but man is it fun! http://web.camaross.com/bb/biggrin.gif
now to get some suspension and to take off some more weight.......
Rick</font>


Do you have those seats sold yet? I wish that I could get them, but I guess that I would rather get my motor rebuilt. Let me know if you want Gary with the TH-350 to come out to car club on Wed. I will see if he can make it in his Impala SS. Talk to ya later.

Aaron


------------------
95 White t-top Z28 M6 Mods include: Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !AIR, !CAGS and a hurst short throw shifter. Many more to come. I will have some times after I break in my motor.

Hey guys, I'm still in CS for one more year. I've been driving a '97 540i since Christmas and will probably stick with it for awhile. That's why I haven't been out in a looong time. I can't stand to be around fast cars too much anymore. It makes me miss the old Supra days too much! If you see me around throw me a rev and give me the go http://web.camaross.com/bb/biggrin.gif. Later!!!

-Travis

------------------
-'97 BMW 540i(STOCK)

-'93 Toyota Supra tt 405rwhp;417rwtq(NOT STOCK)**SOLD**

Aaron,
Yes I still have the seats available. I will do a money plus trade on cloth seats aswell(firebird cloth seats). My brother says he will buy them at the end of the summer but if I can find a buyer before then that would be even better. Go ahead and ask your friend with the th350 to come by car club. ALOT of people have been suggesting I keep my t56 in the car so I will prob just do gears right now and see what 60ft's I can muster. If it doesn't work out then the th350 will definately be a go. Again, I rather do a th350 conversion so I would like to talk to your friend. We'll see how the t56 does at a nicely prepped track like HRP before I go ahead with the th350 though.
Rick

Black 89rs with a 400 and some aluminum things

Silver 98GS400.
Cu round.

so where are we meeting @ now since KROGER management thinks we scare away all their business? the academy lot now?

yea, thats were we went to last night anyways....
We seriouly need to speak to an Oreileys or somebody that is car related and come up with some deal so we can meet in their parking lot and not get hasseled by the cops. Its gotten to the point that between the 16 year old rice/farmers doing burnouts and by the cops driving through to intimidate people,it's not so fun to go out anymore. Personally, I can't wait until the temperatures drop so I can go back to the track rather than these car club things...
Rick

Rick has got a good point. It sux that we get kicked out because of some immature idiots that think it's cool to haul ass through a parking lot. We need suggestions as to where we can go now. Lets post some new suggestions and we can go speak to those establishments and see what we can come up with.

Scott

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@hotmail

<font face="Verdana, Arial" size="2">Originally posted by solid95z:
Rick has got a good point. It sux that we get kicked out because of some immature idiots that think it's cool to haul ass through a parking lot. We need suggestions as to where we can go now. Lets post some new suggestions and we can go speak to those establishments and see what we can come up with.

Scott

</font>

why do you keep changing your name scott? Junior member, lol.

I think the academy lot will do for now. The cops won't do anything unless the owners complain, and since all those stores close before 10pm unless we vandalize them, they should be ok.

I need help. I have to get this car inspected soon and need help finding someone to do it that can choose not to notice certain things *WINK*. If anyone has any advice let me know. Email is tylerwehner@yahoo.com

Thanks

------------------
1989 Mustang LX/Cobra

Z28, SS, T/A...They all taste the same.

We do need to get a place like Oreileys or something to be an official hangout. We don't need a huge parking lot honestly since the large groups happen only about four times a year really(beggining and ending of the fall and spring semester). Personally, I agree with Scott on the Academy lot, it suxs. The location sucks and we will be kicked out. It is only a matter of time. With an official hangout, it will be alot harder to be kicked out and since it is "official", we will need some type of "leader" to speak to the establishment for us. This does give him or her the power to kick out the idiots that ruin things for everyone else. My vote goes to Oreileys.
Brook speak to the manager about this. I think the A&M sports car dud http://web.camaross.com/bb/wink.gif got in with them and NAPA by getting discounts there to help their sales....and who better to bring them business than the guys who are always trying to figure out what to break next in their cars http://web.camaross.com/bb/biggrin.gif
Rick

ps. To the guy with the Cobra, I can get you a good place. I got my inspection sticker there open headers http://web.camaross.com/bb/biggrin.gif...so I think you'll be ok. Do you have any type of service engine light on?Contact me via email and I can help you get that sticker this weekend.

Chris...quit giving Scott a hard time about his name and accept the fact that the blower will never sell...somebody is trying to tell you that your Z wants to be blown..he he he..so install the bitch allready! http://web.camaross.com/bb/cool.gif

[This message has been edited by PhatT/A (edited July 11, 2002).]

YEAH!!! What he said!!!

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
Chris...quit giving Scott a hard time about his name and accept the fact that the blower will never sell...somebody is trying to tell you that your Z wants to be blown..he he he..so install the bitch allready! http://web.camaross.com/bb/cool.gif

</font>


What's this....somebody trying to get rid of a supercharger??



------------------
'92 Camaro RS Convertible, forest green, tan leather, LT1/T56, 1LE brakes & sway bars, "modified" eibach springs, polygraphite bushings, custom built subframes, and 4.10 gears.

Yes, black97Z28, Chris Prause is selling a blower currently. Email him for details or page him in the Texas section. He will be gone out of town though after tonight for like a week or so, I'd email him tonight for your best chance at getting a hold of him.
Rick

[This message has been edited by PhatT/A (edited July 12, 2002).]

[This message has been edited by PhatT/A (edited July 12, 2002).]

last night I found out that we have some guy in town at car club with a red C5 convertible that just had ARE finish a blown 418 LS1 for him........anyone else know about this??? I am really curious to see what it does!
Rick

Was his name Mike Lau? Not sure where Mike was taking his (he has a '01 Red drop-top) or what all the mods he was getting, but I do know its alot.

Mike also has a '01 GMC C3 with the 6.0 and soon to be supercharged that also has a VERY nice stereo system. http://web.camaross.com/bb/smile.gif
------------------
1986 Monte Carlo SS (http://www.geocities.com/mcss86_99)

[This message has been edited by mcss383 (edited July 14, 2002).]

yep, that was him....some oriental guy.
He had a VERY nice truck aswell. Told me it had a heads and cam job on it aswell as a stereo system. He was real cool to talk to and from what he was saying has a bad ass C5 coming into town soon.
Rick

[This message has been edited by PhatT/A (edited July 14, 2002).]

Yeah he's really cool. I am about to get into competing (car stereo that is) so I've been hanging around/talking with him, he's done it plenty before.

I don't know the details of the mods he is getting on the vette, I just know it will be extensive. http://web.camaross.com/bb/smile.gif

Hello Fellas!! Long time no see! Its been about a year since i moved from there. Glad everyone is O.K. Looks like some newbies in the area. Thats good!

I will be coming down Wednesday night with my car. Kinda miss being around there so I thought I would drive down after work to go to the car club. Any challangers? Rick? Raymond? I heard you guys took me and Jordans spot as the top dawgs of the area. I will try to get Kyle Mckenzie to drive his T/A and follow me down there also. I hope the weather permits though.
Later guys!

Tony Shepherd
GIGGEM!

------------------
93 Z28 m6 red
396 stroker(hydraulic) LT1
10 sec n/a (soon)
best n/a to date: 11.24 @124 MPH (injectors too small) Got big ones now!
300 shot dual stage NX ( I am installing this month) going for 9's
"Red Hot" is back!!



[This message has been edited by fast 93 z (edited July 14, 2002).]

Hey Tony,
Whats going on, Scott has told me alot about your 396 and the new looks. I saw a pic of it last week on NTAC board, it looks awsome! Well if weather permits and if I can get my t-top in on time(flew off on saturday and shattered) I will be there and maybe we can play a bit http://web.camaross.com/bb/biggrin.gif
I'm hoping I can get the nine inch/4.56's put together in time for Wednesday now that I see your gonna be in town.
later,
Rick

topdogs?
Hmm.. there might be a few other cars around that some folks might not be familar with

http://web.camaross.com/bb/biggrin.gif

<font face="Verdana, Arial" size="2">Originally posted by gs400tx:
topdogs?
Hmm.. there might be a few other cars around that some folks might not be familar with

http://web.camaross.com/bb/biggrin.gif</font>

Maybe if they quit hiding and came out to take the spot we would know who they were...... http://web.camaross.com/bb/biggrin.gif

Rick

[This message has been edited by PhatT/A (edited July 15, 2002).]

I'm not hard to find !!! I'm at Hastings every Wed. nite !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif ( Rick , E-Mail me !! )

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

<font face="Verdana, Arial" size="2">Originally posted by 1BAD80-Z:
I'm not hard to find !!! I'm at Hastings every Wed. nite !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif ( Rick , E-Mail me !! )
</font>


you got mail Ed...

nice to hear she is finally coming together Brook. I am still trying to get the guy that was gonna sell me a t-top to reply. I am also fixing a few "bugs" with the car so hopefully she can be out there this Wednesday...maybe I hope...thats cool that they thought Daves work was GTP quality, hopefully they wont "fluff" the numbers to make the heads look not as good as theirs..hopefully GTP's proffesionalism is strong. I really think they should do good,they sure looked good to me!
good luck,
Rick
ps. email me the flow numbers as soon as you get em Brook!


[This message has been edited by PhatT/A (edited July 16, 2002).]

Hey.....there is one more person in C/S that can give you guys a good run. That would be Chris B. Have yall raced him yet? He is a low 11 sec car. He will give ya a good run!

Ed.....is that you?? Autotech Ed? Looks like we have both upgraded our cars a little bit! Sweet! Glad your doing good! See ya Wednesday night! http://web.camaross.com/bb/smile.gif I may have to go ahead and hook up my power-adder before I make the trip! http://web.camaross.com/bb/smile.gif How is Thomas's Truck doing?

Brook....see ya out there man!

Tony Shepherd

------------------
93 Z28 m6 red
396 stroker(hydraulic) LT1
10 sec n/a (soon)
best n/a to date: 11.24 @124 MPH (injectors too small) Got big ones now!
300 shot dual stage NX ( I am installing this month) going for 9's
"Red Hot" is back!!

[This message has been edited by fast 93 z (edited July 16, 2002).]

I never hear of Chris B racing anyone cause that guy has the busiest schedule of any person I know. It would be fun to see how any of the "college station boys" fare against one of the, if not the fastest heads and cam LT1's in the country http://web.camaross.com/bb/biggrin.gif
so how about it Chris? wanna race now that your back to 3.42's... http://web.camaross.com/bb/biggrin.gif
Rick

What's up everyone. Yes Evilbox, I did get rid of my car. Tired of messing with constantly fixing everything. Plus I could not get rid of my low rpm stumble and had already spent $2500 on it. I have a 2002 reg cab Chevy 4X4 if anyone is looking for me. It is a pewter stepside.

Hey, first of all I just want to reiterate that car club is at the old Academy at the corner of Texas Ave. and George Bush Drive. Second, I can't wait to see the legendary Tony's car. I have heard so many good things about it. Guess what guys? That fool with the used motor sold it to someone else. I am going to take my old motor up to dallas to get it rebuilt Wed morning. So I should have the car back by the end of next week. And as far as having the baddest car in town, I know that I won't for a long while, but in a couple of months you might be having to contend with a cammed, blown 355 from me. Rick, I will be coming for you, but not until I beat Grant and Raymond. Good luck with the T-top. Wed, I bet that my friend Matt(blue cammed V6) will let you borrow his to go race. If only it would stop raining...

------------------
95 White t-top Z28 M6 Mods include: Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !AIR, !CAGS and a hurst short throw shifter. Many more to come. I will have some times after I break in my motor.

Tony , What's up ???!!!!! I've E-Mailed you a couple of times , but I figured that you got so fast that you didn't want to mess with us old slow pokes !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif What ever happened to Tanner ??? I'm fairly happy with the new stroker , I really won't be able to tell until I get some drag radials , or I might try those circle track tires I've got first. It'll be good to see you again , come in early and stop at Hastings , then We'll go down to the south end !!! See ya tomorrow , Ed ( Oh by the way , Thomas smoked a couple more pistons with too much boost and not enough fuel , AND had the A/F meter on the inlet side of the engine and the return side went lean !! ) Once he gets it all buttoned down , it should be one BAD ASS truck !!!!

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Tanner was last in town about a month ago that I saw him. He just freshened up his stroker again from what I hear. He needs to get a rear end for that car and get some times.

From what I hear Tanner is fed up with it and wants to sell it.
Rick

He was having some oil pressure problems and an oil leak. We thought it may be the valve covers leaking since he has AFR's now. Or possibly a loose oil fliter. He changed his oil filter and put heavier oil in it and it has had no issues since. I think that he will probibly end up keeping it. When you have gone as far as he has the you take a huge lose by selling it.

Scott

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

I agree Scott, but from what I understood from the last time you and me talked you made it sound like he was fixing to turn to the dark side and buy a C5 http://web.camaross.com/bb/biggrin.gif
Rick

Someone needs to let tanner and raymond know that they need to come out tonight. Luke is calling them, but I don't know if he is going to get through to them. Hope that it doesn't rain tonight!

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a hurst short throw shifter. Many more to come. I will have some times after I break in my motor.

Yeah, but I think he was just pissed because he was still having problems. He sounded serious, but he will probibly keep it.

I called Raymond and he said that he will make it out but it will be after 11pm. He has to work late. Tanner lives in Abiline, so I dont think that he will drive all the way down just for car club.

See ya'll tonight!!

Scott

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

Where is the new meeting spot or is it still the same place as always?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

Academy parking lot right off of Texas across from Bennigans/shopping area.
Rick

I "STILL" have as bone to pick with " Mr." Tyler Cobra " I didn't see HIM out there Wed. nite !!! Too many F-Bods scare U away !!?? There are WAY too many F-Bods here in town that "WILL !!!!!" show you tailights !!! If THAT "Tyler Cobra " is SOOOO bad , then come on out and play !!! My motto is that horse flesh tastes GOOOOOD !!! The only thing that tastes better than horse flesh is " SNAKE MEAT !! " http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

lol Ed, after playing with Tony you sure have gotten into the racing mood.... http://web.camaross.com/bb/biggrin.gif

I missed all the action b/c I had to work late. Someone fill me in on the happenings that night.

Well, I got to meet some cool guys and race a couple of Firehawks....it was fun and I think my beat up ol' thirdgen (teehee) did pretty good against a bunch of LS1 cars. http://web.camaross.com/bb/smile.gif

------------------
'92 Camaro RS Convertible, forest green, tan leather, LT1/T56, 1LE brakes & sway bars, "modified" eibach springs, polygraphite bushings, custom built subframes, and 4.10 gears.

Well....I must say...I really enjoyed coming back down there again! It was nice seeing some familiar faces and meeting some new ones. I will try to come back down again. But..I promise it will not be on a Wednesday night!! It was hell getting up at 4:30 am and driving to Austin to work!! So....next time Friday night will be the night!

Ed....enjoyed the race! Next time I will bring some stickum tires so I dont have to play catch up! I was lucky to catch up to you...I didnt think it would ..you had such a jump on me! I really didnt think I would be racing people though. My own fault for not bringing good tires. You have really improved that car since last year! It looks good, sounds good, and runs hella good! Tell Thomas to fix his damn truck!

Later Ags

Tony


------------------
93 Z28 m6 red
396 stroker(hydraulic) LT1
10 sec n/a (soon)
best n/a to date: 11.24 @124 MPH (injectors too small) Got big ones now!
300 shot dual stage NX ( I am installing this month) going for 9's
"Red Hot" is back!!

this sure is a HUGE roll call

If I can figure out what in the hell is up with my car tonight I planned on going street racing and videotaping it. I will be at the car club tonight to get a group of people to come to film....hate to be an ass but NO EURO ****(hondas with neon lights,stock eclipse with giant wing etc need not apply). I won't be there long so look for a white T/A with a black pinstripe and let me know your interested and after maybe 30 minutes or so we can go out "somewhere" and film. I was hoping to post this footage online to let everybody know who is who and to give some of us a chance to do a little bit of showing off http://web.camaross.com/bb/biggrin.gif
see yall tonight,
Rick
ps. do not post recommendations for race locations, email me any ideas you got, thanks.

Yeah, I have a 1996 Red Z28 M6. Its mostly stock right now, but it won't be by the time I get it us to A&M this fall. I am planning of racing at Texas World Speedway on weekends. Hey, Any CTs email me.

Tony , "THAT" was one hell of a race !!! I really enjoyed it !!! It's GOOD to race a friend and not have any hard feelings !!!! I'm gonna get some BFG drag radials and have them ready for ya next time !! We both spun pretty good , and it's always been a good race !!! I'm proud just to get an even match against the famous Tony Sheppard !!! It gives me a better idea of what my car "COULD" run if properly set up , but that race was "AWESOME" , my car performed flawlessly , and our race is going to be the "TALK" of the town for a while !!! So next time we'll run both ways , and that will give me an indication of how I could do out of the hole. I'll probably put the 1.6 RR's on there before we go again and pick up a few ponies , and if we both run on drag radials , it'll be a closer race , and we "MIGHT" have to try the spray !!! Good seein ya again , and you're car sounded Real good !!! Keep me posted , and some time I'll have to drive up to you're area and you can show me all the HOT SPOTS !! Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Are people going up to Academy also on Sunday or is it just a Wed. night thing?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

Also does anybody know if there are any car shows in town like at Sonic for the F-Bodies, or anything at all?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, BMR E-Brace, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

The Aggie car club has been aproved to meet @ the O'Rielly's in Bryan on Wed. nite. Check with Rick or Grant to make sure cuz the College Station O'Rielly's has been OK'd also , but the parking lot there is kinda SMALL !! So Jordan ( The Manager @ O'Rielly's ) said that the Bryan store has more room and the overflow could go into the Billiards room parking lot. But the OK has been given , just check with Grant or Rick to verify !! Later , Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

<font face="Verdana, Arial" size="2">Originally posted by 1BAD80-Z:
The Aggie car club has been aproved to meet @ the O'Rielly's in Bryan on Wed. nite. Check with Rick or Grant to make sure cuz the College Station O'Rielly's has been OK'd also , but the parking lot there is kinda SMALL !! So Jordan ( The Manager @ O'Rielly's ) said that the Bryan store has more room and the overflow could go into the Billiards room parking lot. But the OK has been given , just check with Grant or Rick to verify !! Later , Ed

</font>

I think we're sticking to the Academy lot for now. I don't see a reason to move to such a tiny lot. If Jason's Deli wants us to move then we will.

Thats great Ed. I will be at the Bryan lot on Wednesdays from now on. We will eventually get kicked out of the Academy one so we might aswell. Plus we still have somewhat an easy acess to the highway.
All we need is to somehow make the "wednesday night meet" official so we can start to boot the jack asses who ruin things for everyone else.
Rick

I am gonna try and swing out this week. I have only been out once since I got rid of my 96 Camaro. Well, I got another project underway now so beware everyone..j/k. Ed, if I get to a stuck point, you wanna throw in a few pointers for me? Email me and I will let you know more of what I am gonna do if you have time to help. It will be a suprise for the rest of u. http://web.camaross.com/bb/biggrin.gif

Jeremy , I'll be glad to help !! I'm a horsepower fanatic always looking for that last pony to pull out !!! I'm always at Hastings from 8:30 to 10:00 , and if Ya'll are going to start meeting at O'Reilly's , thats right on my way home , so both meets will be easy for me !! I'm anxious to hear what you've got up your sleeve !!?? See Ya'll tomorrow nite , Ed http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

I'm up there alot visiting my girlfriend, and friends I have that go there. I had a run with a black 93-96 Z28 last time I was there, on George Bush, was that anyone on here?

------------------
:Justin:
97'Z28 Convertible A4
Z Style Ram Air Hood(functional)
!MAF Ported
!TB Coolant Bypass
160 thermo.
SLP Loud Mouth
TB Air Foil
CC "304" cam
CC 1.6RR
CC springs
Hardened pushrods
Taylor Spiro-Pro 8mm Wires
NGK TR55 plugs
HPPIII W/PowerScan card
Hotchkis STB
Hotchkis LCA's
ZR1 17X9 rims
Potenza 285/40ZR17 Tires
Custom plates HFB-Z28
!Worth 20rwhp!

Waiting to be installed: TransGo shift kit, 3.42's and an Eaton Posi.

"Trying is the first step towards failure." Homer Jay Simpson

Member of the Houston F-Body's (http://www.houston-f-body.org)

Pic's of my ride (http://photos.yahoo.com/bc/justinmoe/lst?&.dir=/&.src=ph&.begin=9999&.view=t&.order=&.done=http%3a//photos.yahoo.com/bc/justinmoe/lst%3f%26.dir=/%26.src=ph%26.view=t)

Is everyone going up to academy tonight?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, BMR E-Brace, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

No one wants your POS heads Brook....... http://web.camaross.com/bb/biggrin.gif

Hey, on Wednesday, did everyone go to Academy or what? I wasn't there cause I was checking out some por.... errr.... sleeping for work at 6am the next day.

I just might go work there, I guess thats probably the only job I could show up to the next day hung over like a bitch and not get fired from LOL
Rick

You'll still managed to get fired.

There are a lot of us here. What a great car town. Just need a track. No, Texas Ave. does not count.

(saterday)???

OH!!! You mean Saturday!!

My bad.

Scott


------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

<font face="Verdana, Arial" size="2">Originally posted by solid95z:
(saterday)???

OH!!! You mean Saturday!!

My bad.

Scott


</font>


a$$hole!!!, picking on the mentally retarded...definately not cool. Why don't you go back to working on your neon lights and big ass spoiler you got on your Honda Scott. LOL http://web.camaross.com/bb/biggrin.gif
Rick



[This message has been edited by PhatT/A (edited July 28, 2002).]

YOUR MOM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


HAHAHAAHAHAHAHAHHAHAHA!!!!!!!!!!!!!!!!!!!!!!


By the way, AT LEAST MY CAR IS TUNED!!!!!!!!

HAHAHAHAHAHAHAHAHAHAHA!!!!!!!!!!!!!!!!!!!!!!

Scott

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

<font face="Verdana, Arial" size="2">Originally posted by solid95z:
YOUR MOM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


HAHAHAAHAHAHAHAHHAHAHA!!!!!!!!!!!!!!!!!!!!!!


By the way, AT LEAST MY CAR IS TUNED!!!!!!!!

HAHAHAHAHAHAHAHAHAHAHA!!!!!!!!!!!!!!!!!!!!!!

Scott

</font>

Don't make me run you off the road and cause you to bend another wheel next time I see you Scott...LOL http://web.camaross.com/bb/biggrin.gif
Rick

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
Don't make me run you off the road and cause you to bend another wheel next time I see you Scott...LOL http://web.camaross.com/bb/biggrin.gif
Rick</font>
Rick

you are gay.

that is all.
Chris

LOL
Chris sucks d1ck. That is all. http://web.camaross.com/bb/biggrin.gif
Rick

I raced a blue early 90's camaro on highway 6 on Friday night, was that anyone in here?

Yea that was a friend of mine. He said some crazy a$$ black Z28 with a homo in it passed him up real fast while his blue third gen was broken down on the side of the road, pointing and laughing saying "I beat ya!" ........looser
LOL
Rick
http://web.camaross.com/bb/biggrin.gif

[This message has been edited by PhatT/A (edited July 28, 2002).]

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
Yea that was a friend of mine. He said some crazy a$$ black Z28 with a homo in it passed him up real fast while his blue third gen was broken down on the side of the road, pointing and laughing saying "I beat ya!" ........looser
LOL
Rick
http://web.camaross.com/bb/biggrin.gif
</font>

at least it wasn't a 5 year-old on a trike. He went home crying saying a homo with no job that lives at home and is 22 tried to run him over after he said the TA needed tuning. boohoo.

[This message has been edited by BLK97Z28 (edited July 29, 2002).]

LOL....daaaamn thats a good one, so is that the attitude all LT1 guys get when they are too slow to beat untuned white LS1 t/a's? hmmm........LOL
Rick
"picks on kids on trikes and slow LT1's"

[This message has been edited by PhatT/A (edited July 29, 2002).]

[This message has been edited by PhatT/A (edited July 29, 2002).]

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
LOL....daaaamn thats a good one, so is that the attitude all LT1 guys get when they are too slow to beat untuned white LS1 t/a's? hmmm........LOL
Rick
"picks on kids on trikes and slow LT1's"

</font>


It wouldn't be so sad if the kid didn't beat you and then have you do a fly-by complaining of tuning. He said he couldn't hear over the backfire of your engine.

Man, I think I'd better put my boots on. The sh*t is getting pretty deep in here. http://web.camaross.com/bb/biggrin.gif

------------------
'92 Camaro RS Convertible, forest green, tan leather, LT1/T56, 1LE brakes & sway bars, "modified" eibach springs, polygraphite bushings, custom built subframes, and 4.10 gears.

OK - On a serious note. I just drove to Dallas a few days ago and after being on 21 no longer than 10 minutes some dumbass with a big ass truck and no mud flaps sent a rock right into my windshield. Does anyone know anyone in town that does a good job with rock chips? I can't stand to see that thing in my windshield. Thanks

Tyler

BTW... Where are y'all meeting this Weds. and what time? I drove by Academy last Weds. and all I saw were imports. Hope that wasn't any of you guys.

------------------
1989 Mustang LX/Cobra

Z28, SS, T/A...They all taste the same.

BWAHAHAHAHAHAHAHAHAHHAHAAHAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAH AHAHAHAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAHAHAH! !!!!!!!!!!!!!!!!!!!!


HA!

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

WORD!

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

The new location is supposed to be @ O'Reilly's in Bryan , and YES I know somebody who will do your windshield at a reasonable cost !! Do you have insurance ?? You get a new windsheild with no deductable !! E-Mail me , Ed ( I like this personable post for just our area !!!! ) http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Can ANYBODY give me an E-Mail address for Tony Sheppard ???? ( Fast 93- ) Tony , are you out there ???? http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

I have to say is that ricks car is freaking awesome. That is all.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

Bring it Brook... http://web.camaross.com/bb/biggrin.gif
Rick

I want some !!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif That's no fair !! Ya'll can't play without me !!?? http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Ed, you always have to pick a fight. i would too though if my car was as fast as yours.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

Whe i get done, I will race ya Ed, on one condition though. I get to use the n2o and you don't...lol.

http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Your car done this month Brook?? lol suuuuuureeeeeeee
http://web.camaross.com/bb/biggrin.gif
Rick

I agree with ya on that one Rick. That car was supposed to be done how long ago Brook? Not to doubt u or anything but you have told me it was almost done 4 or 5 times now http://web.camaross.com/bb/biggrin.gif So how about that race on those conditions Ed? Or if you give me like 5 or 6 cars I'll run you on n2o and we can make it exciting. Pistons and cam are on order right now. Just need machine work and heads now.

What you building JCason? Sounds very interesting http://web.camaross.com/bb/biggrin.gif
I'll race you on spray ED, I will be spraying aswell so what the heck...
Rick

Rick , We'll race once on the motor and once on the spray , K ??? I need to order my BFG Drag Radials first though , that thing gets kinda hairy on the juice !!! I'll race you on the motor for just the hell of it , regardless of what everybody says , I don't spray unless the other person is !! Ask Jonathan Akers how often I fill my bottle ?? And ask Dempsy or Jim at NAPA the same question ??? I use one bottle a year , and thats mostly playing out on the feeder road right here by my house to see how well the car will do !! That 434 is one bad MO-FO , I don't need to spray !! The car just barely hooks up on just the motor alone , remember I'm running BONE STOCK bfg street radials !!! On the spray is one HELL of a ride !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif I filled one bottle at NAPA back in April , and its still half full , I'm fixin ti fill my spare over at Jonathans , just in case something serious comes up and I need a full bottle for both stages , but I've got to get some stickums first !!! Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Brook you'r gonna have to actually build a motor that runs for more than a day before you start bragging about it and planning to spray it...ass
Rick

Brook , I'm running a 100 shot that is throttle activated , and a 150 shot that is activated on the shifter !! I also have a 125 shot that isn't hooked up yet due to severe traction problems , but if you have any questions on how to make a motor live on the spray , E-Mail me and I'll give you all my secrets!!! There's ALOT of do's and don'ts that have to be adhered to in order NOT to blow an expensive motor !!! Beleive me , I've Learned the HARD way !!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Brook , come on up to Hastings on Wed. nite and we can shoot the breeze and get to know each other. I usually get pulled home by the ear at about 10:30 cuz the wife doesn't like me out late !!! You can come over to the house on a weekend , and I'll tell you most of my secrets of why my car runs so strong !!! ( AND it's "NOT" because of JUICE !!! ) I work at the EXXON station on 29th & Villa Maria , stop by some time when you've got a few spare minutes !!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

I didn't know you work at Pete's Exxon Ed. We send lots of business that way. I am a support manager at the automotive part of the Wal Mart supercenter. I will feel even better sending you more business there now.

Jeremy, WTF are you building? I hear from people that I need to run you, but I don't think that there will be much point if you are really building something bad. Oh well, just curious what this motor will have.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

Jeremy , I have a 67 Camaro for sale , and just about any size motor you'd like to go with it !!!

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Yo Jeremy,
Some guy I was talking to last night named Justin Puts, Josh Puts little brother, said he knew you from some class at A&M. He was saying he'd been at Nastysota with you a few times. I believe this guy is also building up an old Charger... http://web.camaross.com/bb/biggrin.gif
Rick

Hey guys, I will have the rear end in the car hopefully by this weekend and will have tuning and dyno numbers by next week! I am very excited, wish me luck http://web.camaross.com/bb/biggrin.gif
Rick
ps. I should also have flow numbers from the porter that did my heads since he is having a set of LS1 heads he did flowed today or tomorrow.

Yeah, I know Justin Putz. He is building a charger, but it is taking him some time. Mopars are way to expensive. For everyone curious, here is the set-up I am working on. The car is an 82 Camaro Berlinetta. Lets see, here is the motor, 355, TRW forged pistons 9.7 to 1 compressions, 5.7 forged rods, Comp Xtreme 274 cam, Pro Action Iron Lightning Cylinder heads (flow almost the same as Trick Flow 23* but more reasonable prices), Edelbrock Performer RPM intake, Edelbrock 750 carb, 3.42 gears, TH-350 tranny, 2600 stall, oh and I almost forgot an NX Kit juicing around 150 http://web.camaross.com/bb/biggrin.gif She will be done and on the streets sometime after Christmas. Block is going to the machine shop today and my pistons and cam just came in. Just saving a little money for the heads and carb now. Nitrous kit is gonna be a Christmas gift from my girlfriend and oparents.

Where is everyone meeting tonight? I saw a few people at Hastings last week and went to O'reilly's at about 10:30 and no one was there. I also drove past Academy and there was nothing but imports. Just wonderin' where everybody's hiding http://web.camaross.com/bb/wink.gif. See ya later.

Tyler

------------------
1989 Mustang LX/Cobra

Z28, SS, T/A...They all taste the same.

Fuddruckers sounds good to me.
Rick

Sounds good. We just need to find one spot and stick to it. I would also like to get away from all the dumbasses at Academy. Some people just don't know how to act. Save the burnouts for the track.

Funny you mention burnouts Jeremy. Ed, after you left the cops came and kicked us out of Academy because of complaints of someone burning out. I think fudruckers is a good idea especially if one of the managers is there and can tell the dumbasses to go away(not talking about you ed). I just want a car club without rice, Is that too much to ask for? I would be more than happy to meet at fudruckers, and it is smaller, so maybe not as much rice will be attracted to it, or at least they can't all fit with their double and triple parking.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

if double and tripple parking is rice then Scott is the king of rice.....HAHAHAHAHAHA
Rick
ps. don't hate on me Scott, I'm only kidding
http://web.camaross.com/bb/wink.gif

RICE, who is the one with the red lid and firebird decal on it. You might as well start painting your entire interior red http://web.camaross.com/bb/biggrin.gif http://web.camaross.com/bb/biggrin.gif http://web.camaross.com/bb/biggrin.gif

Just kidding http://web.camaross.com/bb/wink.gif

------------------
'95 m6 z-28
52cc stock port factory lt-1 heads & intake little cam
stock tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

I'm in NW Houston, but I make an occasional trip to Navasota.. look for a "pink" 68 camaro with fat tires out back, pics on my page at

http://camaroz28.cardomain.com/id/texlurch

If you see me, shout and say "HEY!"

------------------
Texlurch - 68 Camaro-LT1 w/Hot Cam, TT & TIC coming soon!
" a little spray never hurt anyone, spank you very much!"
or the old standby:"I came here to race, not sell real estate. You ain't scared, is ya?"

So since we are now kicked out of academy where are we going to be meeting? Bryan hastings seems to work well. Don't know if we have the ok from Fudruckers yet or not, but Hastings is probably where I will go. Who knows, I MIGHT even get my car back in time. It is doubtful, but still. Sure would be nice.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

Who got us kicked out of Academy?

I say we make an official car club and have someones house or designated area such as Oreilies as the meeting place. That way we don't get kicked out, keep it small and organized where we all know who is who so people will want to behave and not end up getting us kicked out. The wednesday car club thing has not been working now for a long time. It is not worth going to anymore. Hopefully someone with some "leadership" skills can step in and start an official club thats fun to attend and be part of once again!
SAY NO TO RICE!
Rick

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:

SAY NO TO RICE!
</font>

WHOOP! http://web.camaross.com/bb/smile.gif

Fudds is a bad idea, we need a parking lot with just one owner so if he/she gives us consent the chances of getting kicked out are small. At Fudds for example, lots of businesses share that space and even if Fudds agrees with it I guarantee you the other stores wont and we will be in the same situation that we are in now.
Rick

Whats wrong with one of the school parking lots? I know on a wed night the zachry lot is pretty much empty at the far end (with the exception of engr's that are still there from the morning http://web.camaross.com/bb/frown.gif )

<font face="Verdana, Arial" size="2">Originally posted by mcss383:
I know on a wed night the zachry lot is pretty much empty at the far end (with the exception of engr's that are still there from the morning http://web.camaross.com/bb/frown.gif )</font>

We engrs. are not all losers!! http://web.camaross.com/bb/frown.gif well, maybe.

whatever, the businesses come first and if one complains the owner of the parking lot will cave in....thats why I still say pick out a parking lot with just one business on it and get the consent of it to reduce the likelihood of getting kicked out.

BLK97Z28: Don't deny it, you know you are! http://web.camaross.com/bb/tongue.gif

aggiez28: I kinda wondered that since no one uses it for that (i guess only the A&M car club can use it).....but I don't know if I've ever seen a school cop out there around 10pm.....

If everyone was a member of the A&M car club (well at least most everybody, I'm not see loser comment above lol) couldn't we say we are just meeting there for that, since that is a school org?

thats true....


Well, its rather hard to think of a parking lot that is only used by one store....

Lowes is one, The old furrows maybe. There are 100's of lots in this town, we just have to choose a good one, and keep rice out. Then we will be set.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

old furrows would be great and it sits right next to the highway.... http://web.camaross.com/bb/biggrin.gif..not that I would plan on street racing http://web.camaross.com/bb/wink.gif
Rick

Let's try Hastings in Bryan this week and see how we like it, and if we don't like it, then Furrows it is. I still like the idea of lowes too, and I don't the cops will screw with us as much in Bryan. See yall then.

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, TB bypass, !EGR, !CAGS and a B&M ripper shifter. Many more to come. I will have some times after I break in my motor.

hey Rick,

this is jason, jennifer's cousin. whats been going on ? you guys could also try the winn dixie parking lot now that they are out of business. Just make sure that people don't leave a lot of trash in the parking lot when yall meet. This was the biggest complaint we had from business's when i used to frequent car club many moons ago.

Sup Jason!
Hey man long time no see, I'm doing allright.
Gimme a call sometime so I can show you the new toy under the hood http://web.camaross.com/bb/biggrin.gif
I heard you finally got engaged to Kendra and set a date? Congrats...I'm also counting the last days of freedom myself lol, I grad this fall so me and Jen will be setting a date real soon http://web.camaross.com/bb/eek.gif he he he
Anyways, I'll probably be at car club this Wednesday now that finals are over with so I might catch you there.
later,
Rick

Hey, this is Luke.......Gunmetal Grey 93 z28. I'll stop by the places listed above, hopefully I'll see ya'll there.

The manager at the Bryan O'Reilly's is a friend of mine and it's already been ok'ed , but it's up to ya'll , by the time you youngun's are starting to gather , this old fool is headed for the warm comfy spot !!! I tried to organize an F-Body BBQ last year but mother nature wouldn't cooperate , so about the middle of next month I'm gonna give it another shot. My house sits on two acres of land so there'll be plenty of parking , and I'm going to supply the meat ,beans and potato salad , I guess we'll shoot for the 14th. I need somebody to organize the extras , like a keg and chips and dip , and extra chairs and at least one long table or a couple of small ones. I live by the bypass , so anybody that's feelin frisky can shoot over to the feeder road where there's a quarter marked off !! E-Mail me or post a message. I might even let a mustang or two attend , just cuz they taste good !!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

What about a Monte SS? http://web.camaross.com/bb/wink.gif

------------------
1986 Monte Carlo SS (http://www.geocities.com/mcss86_99)

damn! Move that back a week to the 21st and I might toss the 68 on the trailer and come up for some free food! http://web.camaross.com/bb/biggrin.gif

------------------
Texlurch - 68 Camaro-LT1 w/Hot Cam, TT & TIC coming soon!
" a little spray never hurt anyone, spank you very much!"
or the old standby:"I came here to race, not sell real estate. You ain't scared, is ya?"

I'm game for both the food and the after-party activities http://web.camaross.com/bb/biggrin.gif
Rick

Got room for a Chevy 4X4 since the Camaro won't be up and running yet? Com'on I got a f-body, it just isn't done yet.

Everybody is welcome !! ( Well , maybe NOT the ricers !!! ) Brook , good thing on the keg , now we just need tables and chairs and side dishes !! Brook , what liquor store do you work at ??? Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

So we are talking about Sept 14th? I can probably bring some chairs, and maybe even a small table. I don't know how that is going to work with my camaro though. I am so used to having a truck. I will find a way to make it work though.

Damn, I forgot. On Sept 14 I will be out of town on a dove hunt. Just my luck. Ya'll have fun. If anyone needs me to haul anything the week before let me know and I will be glad to help since most have cars.

not many folks were at hastings thats for sure. http://web.camaross.com/bb/frown.gif

Man I miss BCS.

college station Oreillies across from the Sonic/Albertson's is where they were at last night



[This message has been edited by PhatT/A (edited August 22, 2002).]

Only invite F-bods out to O'Reilly's. NO RICE. I'm tired of their gayness and high school jail bait in k-mart clothes. If you bring a ricer, you will be shot on site and dumped in the Brazos River.

Are ya'll going up to oreillys tonight?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, BMR E-Brace, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

no!, stay as far away from friday night rice club people!
Rick

it is probably going to be hastings in bryan tonight. At least that's where I am going to be. Guess what? As always, my car was promised to me again tonight, and wait... NO CAR! I am so tired of this. oh well, I should have it tomorrow morning. hopefully...

Brook , you can bring my head by the shop on the corner of 29th & Villa Maria , or stop by the house. Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

I HAVE MY CAR! It has been in the shop over two months and I finally have it back! I will definately be out at car club on wednesday. You all had better make it. I want to show it off. It sounds pretty scary. Hope to see you all then!

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, !EGR, !AIR and a B&M ripper shifter. Maybe a little something else...

Guess what? I got pulled over last night. Ya wanna know what for? NO FRONT LICENSE PLATE! i didn't even get one with the car!
Now I have to go down to the tax office and buy a new one and put it on my car. When the cop pulled me over I kissed enough ass to just get a warning, but still. I was going so slow, and then I saw the cop turn around. I thought for sure that he wasn't coming after me, and then... lights! it sucked. and I know that the lope from my car didn't help. Just hope that this crap doesn't happen all the time just because I have an f-body. I will have to get a quieter exhaust. http://web.camaross.com/bb/wink.gif

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, !EGR, !AIR and a B&M ripper shifter. Maybe a little something else...

I have gotten one warning ticket for the front license plate for the past 4 years...never ever have I put it on...screw em, they will always harrass you but hardly ever ticket you...
Rick

I just realized that today was WEDNESDAY! Car Club! I am so excited. See all you real sports car guys at O'rilleys tonight!talk to you then.

aaron

------------------
95 White t-top Z28 M6 Mods include: Hotcam, Macs w/ offroad pipe, flowmaster, airfoil, !EGR, !AIR and a B&M ripper shifter. Maybe a little something else...

<font face="Verdana, Arial" size="2">Originally posted by aggiez28:
dont waste your $$ on a front plate.!!!!!

ive gotten a few warning for it over the years only when i was pulled over for somthign else though.

even if you had gotten a tickit it would have been dismissed since you just go tthe car


brook</font>

I actually agree with you on something for once..your still an ass though LOL http://web.camaross.com/bb/biggrin.gif
Rick

Lets start getting ready for the 14th. I need people to start E-Mailing me with what they can bring. We need to have a meet next wed. , so we can get the details worked out !!! Let's do this with STYLE !!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

do a list of what you need us to bring and we can start to assign something to everyone...
Rick

<font face="Verdana, Arial" size="2">Originally posted by aggiez28:
well i can bring a tap and c02 for a keg, someone get the keg at like appletree or somewhere
its cheeper than a liqour store.

i also have a table

also have some info on a meeting place for car club.....

i talked to a cop and he said the mall should be fine as long as theres no trash left and we dont tear up the place.

i prefer orileys but thats just in case we need more room


brook</font>

Oreillies is working out just fine Brook. We can actually control who can hang out or not since we have permission to do so from the manager. At the mall we could not do that.
Rick

if we run out of space at Orilley's then we will probably go there. But last week, at one time we had 15 F-bods, 4 Mustang GT's, and 2 Mitsubishi 3000 GT VR4's. I'd say that this location is working out awesome. We just need to make sure that it is kept clean, and rubber free. We got complaints last week of trash. I am going to make sure that everybody knows wed.

I need a little help from the local motorheads. My car's fuel pressure just fell from 6-7 psi to 2-3 psi for no apparent reason. I have messed with the regulator most of the day and have come up with nothing. I can get it up to 6 psi until I start the car, then it goes right back down. If anyone has any suggestions please let me know. I may not have an F-bod but at least it's not an import. Thanks.

Tyler

There's a car club is BCS??!?!?!

well Chris if you woulda picked up the cell when I called you last wed. you woulda seen the bad ass turnout we got, plus for once we had things out there other than fbodies!
Rick

I did talk to you Brook on Wed., you told me you were gonna be there but you never showed up. I'll call you this week if it is a good turnout again.
Rick

When is it that you meet? 10pm?

My roomate and I will prob start coming when we can (me a '86 Monte SS, him a '69 Mach 1)

Rick, thanks for calling me also. i still need a ride since you got it tuned and gears.

justin

Just wondering when I volunteered for "phone-bitch".....he he he
Rick

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
Just wondering when I volunteered for "phone-bitch".....he he he
Rick</font>

Well, you've always been a b!tch. Phone b!tch was the next natural step.

LOL...well Chris if your theory holds true, then since you've always been an a-s-s-hole, then $hit head would naturally be the next step for you.... http://web.camaross.com/bb/biggrin.gif he he he
Rick

I just got an email saying that Wed is Aggie night at the nasty. Is anyone going or is everyone gonna stay here and meet up like always?
Kyle

rick, you are gonna have to watch out for me now. I just picked up my gears yesterday. also, my car is completely broken in, and it is running like a raped ape with it's ass on fire. Did a couple more little mods since we ran last. We will have to see how I do next time. Talk to you later http://web.camaross.com/bb/wink.gif

p.s. Everybody, Rick and I ran from a highway roll. 60 to about 110. Ask him how it went.

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

<font face="Verdana, Arial" size="2">Originally posted by jimbo95Z28:
rick, you are gonna have to watch out for me now. I just picked up my gears yesterday. also, my car is completely broken in, and it is running like a raped ape with it's ass on fire. Did a couple more little mods since we ran last. We will have to see how I do next time. Talk to you later http://web.camaross.com/bb/wink.gif

p.s. Everybody, Rick and I ran from a highway roll. 60 to about 110. Ask him how it went.

</font>


If anyone else was driving Rick's car, it would have been better.

<font face="Verdana, Arial" size="2">Originally posted by BLK97Z28:

If anyone else was driving Rick's car, it would have been better.</font>

That was just plain mean. I would never be that mean. It's not that he is a bad driver, he just underestimated me. He only downshifted to 4th for gods sake. That was the only problem, at least that's what he said. http://web.camaross.com/bb/wink.gif http://web.camaross.com/bb/biggrin.gif :P

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

Ok Aaron, I raced you in 4th..the top of it to be specific...then I shifted into fith, an over drive gear, which I was at through out the remainder of the race...who races in over drive??? It was a mercy move by my part so I wouldn't suck in your doors so bad while I past ya...but I still walked you hard...tomorow my friend I wont be so nice and I will be packing a nice set of tires..I AM CALLING YOU OUT! http://web.camaross.com/bb/biggrin.gif
Rick

Brook,
yea I have seen em actually...
I saw a grandma driving a pewter/silver one??
and I saw some guy driving a red vert one, they sounded like any other stang to me... but they do look nice...the front fascia looks alot meaner than the usual mustang...is it a Cobra only fascia or do all 03's have it? Anyhow, hope they run strong considering they come blown from the factory....
Rick

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
Ok Aaron, I raced you in 4th..the top of it to be specific...then I shifted into fith, an over drive gear, which I was at through out the remainder of the race...who races in over drive??? It was a mercy move by my part so I wouldn't suck in your doors so bad while I past ya...but I still walked you hard...tomorow my friend I wont be so nice and I will be packing a nice set of tires..I AM CALLING YOU OUT! http://web.camaross.com/bb/biggrin.gif
Rick</font>

you didn't walk me hard, you pulled a length and a half. You were also in 4th the entire race. you never shifted into fifth. at 60 I hope that you are not at the top of 4th. that would be pretty sad. I will run you wed if you want... on street tires. This is going to be fun http://web.camaross.com/bb/biggrin.gif

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

I wont race you on street tires, I built a car for the track not the street, if you are gonna race me then lets even out the odds, you have traction and I want traction too..
Rick
ps. I downshifted from 6th to 4th at 70mph, that would put me at the top of fourth, since I have 4.56's it doesnt take me long to run out of gear so I quickly went into fith, I had a person in the car Aaron that can testify to that...plus I only pulled a length and a half cause after that I shut it off, next time I'll shut it off after I cross a few state lines and you're still sitting in CS he he he....tomorrow will be fun, you're gonna make me have to kill my own kind http://web.camaross.com/bb/wink.gif


[This message has been edited by PhatT/A (edited September 03, 2002).]

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
I wont race you on street tires, I built a car for the track not the street, if you are gonna race me then lets even out the odds, you have traction and I want traction too..
Rick
ps. I downshifted from 6th to 4th at 70mph, that would put me at the top of fourth, since I have 4.56's it doesnt take me long to run out of gear so I quickly went into fith, I had a person in the car Aaron that can testify to that...tomorrow will be fun, you'r gonna make me have to kill my own kind http://web.camaross.com/bb/wink.gif


[This message has been edited by PhatT/A (edited September 03, 2002).]</font>


I'll race you up to 40mph. biatch!

rick, if you want to run, we can run on my terms. I am satisfied with the last race http://web.camaross.com/bb/smile.gif You sure are defensive. It is not like it really matters. The only reason I told people is because I knew that you weren't trying, and this is going to be my only chance to brag. You also didn't shift to 5th. We didn't even hit 110. you need to relax. But if you really want an old fashioned butt whooping that bad, we can arrange that http://web.camaross.com/bb/wink.gif seriously though, learn to lighten up a little. Everybody knows that you will smoke me, just not that bad. hehe talk to you later.

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

I am not mad about it, just kinda annoyed, but thats cool, its how all races start...with a litle bit of **** talking...now common courtesy says since you began the talk you gotta race to the terms of the challenger, now all I am asking is for a litle traction...does John Force ask all his opponents not to spray when that is what a funny car is setup to use? My car is not very practical on the street, all I am asking is for traction just like you have...now if you will admit that with traction its not even worth the time to race for me, then yes I will race you on street tires from a roll......its not like I am asking for land or anything..
Rick

I am not ****talking, I am just saying the truth. I even said that I was happy with the outcome of the race. You are the one talking mess, and the one challenging, so if you want a race with me, you do it on my terms. sorry dude, but I am not the one challenging you. that means that I get to choose if I want to run you or not. hehe, this is so much fun

Aaron, we are both at work right now sitting like right next to each other lol, lets just wait until after our shifts to clear this up and quit wasting bandwith http://web.camaross.com/bb/biggrin.gif lol
Rick

Rick , you can borrow my tires !!! You spin waaayyyy Too much on street tires !! That's the problem with too much horsepower and too much gear !! Now on to the weekend party , I'm supplying the meat , potato salad and beans. Ya'll have to organize the rest ( tables , chairs , brew , chips & dip , Etc , Etc. ) I have a G-Tech timer , or Ya'll can go heads up , but we have only about a week left , so Ya'll get on the ball !!! I have Tons of parking spaces so parking won't be a problem !!! Some Trash can punch would be good !!!! Sausage , or any other meat , including ANY GOOD edibles would be nice. I'm doing the main planning so Ya'll do the rest !!!! ALOT of GOOD lookin Chicks would be nice too !!!!!!!!!!!! Peace , Ed http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

yes I do, and they aint your ET's so don't worry bout it
Rick

whoa... 11 pages! gonna have to lock this one soon..

But feel free to start another.

I know nothing bad is going on in here http://web.camaross.com/bb/wink.gif ... Just that the thread is getting a wee bit long. That's why I recommended starting a fresh one. Just gotta abide by "rules" of keeping threads to a certain length. And have already let this one get a bit too long as it is http://web.camaross.com/bb/wink.gif

So when does everyone meet tomm night? 10pm?

wed. night should be HUGE. all students are back in town. Whenever I run into someone with an f-bod I invite them to Oreilly's, trying to get a nice large crowd out there. I'll be there to judge the Aaron-Rick race. I would race but I still haven't changed my plugs and wires http://web.camaross.com/bb/frown.gif

Well, my clutch took a dump last night after work and now everytime I start the car after a long break the clutch goes to the floor...I have babied this thing all day, stock clutch lasted me 56 thousand miles so I am happy...it also set a code last night..... http://web.camaross.com/bb/rolleyes.gif
the fun never ends I guess....
I'll be at car club, but again my chance at running her has been postponed http://web.camaross.com/bb/frown.gif
Rick
ps. Ed, I really don't wanna go through a clutch install, as soon as I can scrape the cash I might give you a holler if your work will let you do that at a good price.

Rick, always looking for a way out. http://web.camaross.com/bb/wink.gif Are you scared? J/k I know that your car will smoke me. But maybe not by the time you get your new clutch in. We will have to see. I have some pretty big plans that might be happening pretty soon. http://web.camaross.com/bb/wink.gif Hope that you can get your car back in good running shape soon.

Aaron

<font face="Verdana, Arial" size="2">Originally posted by jimbo95Z28:
Rick, always looking for a way out. http://web.camaross.com/bb/wink.gif Are you scared? J/k I know that your car will smoke me. But maybe not by the time you get your new clutch in. We will have to see. I have some pretty big plans that might be happening pretty soon. http://web.camaross.com/bb/wink.gif Hope that you can get your car back in good running shape soon.

Aaron</font>

Cool, good luck and as soon as I can get this clutch in I can whoop ya http://web.camaross.com/bb/biggrin.gif Actually I can drive it hard once or twice a day still without it crapping out on me, so maybe we can still do it and looser buys winner a new clutch http://web.camaross.com/bb/biggrin.gif
Rick

First off, your SPEC clutch wont work in Ricks car, it's an LS1. Second, it may be the slave cylinder. Ask Raymond about that. He is having the same issue with his car. Check that before you order a new clutch.


------------------
Speed Demon Motorsports

'95 m6 z-28
Crower Cam 212/219 474/495 110 ls
stock heads, tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

I will take your stage 3 if you want to give it to me brook. http://web.camaross.com/bb/biggrin.gif I need to get my gears in soon. Matt sold me some brand new GM 3:73's for $60. I can't wait to get my next paycheck. all going to mod money!

sure hope your right Scott, that would be nice...otherwise you owe me for a new clutch, I know you and Chris B messed it up by standing next to it you bastards!! LOL jk!
later,
Rick
ps. were did yall go out to dinner on Sunday?

[This message has been edited by PhatT/A (edited September 04, 2002).]

Rick , you buy the parts , and I'll give you the best price I probably can !!! There's a Black LS1 in town with spray with black wheels that thinks he's bad !!! I lost due to a smoked trans !!! I had him by three car lenghts when my tranny went , and the next race is next race is next Wed. @ 9:00 and he'll race for ANY amount of money !! Lets get the clutch in and the slicks on , and I'll back you on the dough !!! I want Tony here in town next Wed. For the first race , and I'm gonna get the new tranny in by then !!! I had him by three car lenght when my tranny went , I need to get ahold of Tony for a Good Spankin !!! And put this punk in his place !!!! Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

hey rick, Robert may let you borrow his N2O kit if you really want to smoke this joker. He told me that I could borrow it if I wanted to. If not, you can probably whoop him anyway, but it would probably be more fun if you beat him be 10 lengths instead of 4-5. I can wait to see you big boys tear this guy a new one. I wish that I had some spray so that I could tear this guy a new one too. I might get some soon http://web.camaross.com/bb/wink.gif

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

I got a race set up with both guys with the black SS's. We have it set for 11pm heads up no nitrous 100 bucks a pop. We'll see what happens...
Rick

don't worry brook your car couldn't hang anyways.

justin

<font face="Verdana, Arial" size="2">Originally posted by 59apache:
don't worry brook your car couldn't hang anyways.

justin</font>

Why is everyone so mean to Brook. Just because he lures children into his apt and... uh.. nm

brook knows that i mean know harm with my comments. but if he doesn't get his car done soon i'm gonna have a dual stage nitrous set up http://web.camaross.com/bb/wink.gif

justin

like I always say, when you're finished with your car, whenever that is since you haven't even started yet http://web.camaross.com/bb/rolleyes.gif I'll be more than happy to kick your a$$..lol 460 rwhp lol,I have asked so many people about that, and they all agree with me...BS!...damn I wish I had the bs flag pic right now...
Rick



[This message has been edited by PhatT/A (edited September 06, 2002).]

I sure hope the weather is good for next wed. I want it to be pleasant for the huge butt kicking.

hey ill try my best to show up but damn im at the mercy of a body shop on my 95z28 and a machine shop for my 72 z28s motor.. ill try to be there. i already talked to brook and aaron about it.lookin forward to seeing eds 80 camaro.. later everyone..

------------------
Quench my thirst with gasoline...

I don't think anyone here is fast eneough yet to beat this guy but if somebody does then awsome...I would love to se this guy get beat!!!!!
Rick

I was at Aamco all day today building my other tranny. I'll probably put it in tomorrow night , and hook up the third stage of nitrous. I'll blow this A$$holes doors off or blow something else up trying !!! The new tranny has the best we could put in it so if there's a problem I'll probably break something else !! BUT I "WON'T" GIVE UP !!! ( Who's got the WD-40 ??? ) http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

We need to get organized for the F-Body party on the 14th !!!! I need some E-Mails on who's gonna do what ???? We need tables and chairs , Brew , Salads , etc's !!!! Ed http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

prietojr@hotmail.com
My fiances' dad makes some bad ass Guacamole dip...we can bring that!
Put me down for three Ed!
Rick

Anybody else ??? http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed

Some directions and a time would be helpful Ed. http://web.camaross.com/bb/biggrin.gif
later,
Rick

I live on the corner of old Hearn road and Stevens Dr. ( S.W. Corner ) Second house on the left , Long horseshoe Dr. Beige house with a bkack T.A. and a brown primer 67 Camaro. And of course "The 80-Z" Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

hey Aaron, lets reschedule our run for some other time. I was too busy to finsih changing the plug wires on my car. I don't want to have an excuse IF I were to lose to you. We can still run, but I'd rather run when there wouldn't be any excuses.

Man Ed, I didn't know you lived so close to me. I live off of Woodville on Lakewood, right behind the white church off of Texas. I see those cars out there all the time and wondered whose they were. I always see that black TA just sitting there. Need me to put some miles on it for you? http://web.camaross.com/bb/biggrin.gif

<font face="Verdana, Arial" size="2">Originally posted by BLK97Z28:
hey Aaron, lets reschedule our run for some other time. I was too busy to finsih changing the plug wires on my car. I don't want to have an excuse IF I were to lose to you. We can still run, but I'd rather run when there wouldn't be any excuses.</font>

IF?!? I am sorry dude, but I am going to smoke you. You are just like rick, always looking for excuses to get out of races http://web.camaross.com/bb/wink.gif (j/k rick) Man, it has been a while since I have talked this much crap. HAHA, it is so fun. Seriously, change your wires, because I don't want to hear any excuses WHEN I beat you.

EDIT: Brook, My offer still stands, and it is guaranteed cash!

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

[This message has been edited by jimbo95Z28 (edited September 11, 2002).]

Chris vs. Aaron.....lets get reeeaady to ruuumbleee! hahahaha
Hey anyone here wanna race me for 200 bucks? The catch is I get to spray, you cant look under my hood and I get the move and some land...sound fair? I only run high 16's I swear...BAHAHAHAHAHAA
Rick

Just wondering if anybody had Hooker Headers installed with Borla on an LT1. With no other add-ons like cam or heads. I am wanting to order the Hooker LT's and want to hear the sound difference in person.

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, BMR E-Brace, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

<font face="Verdana, Arial" size="2">Originally posted by jimbo95Z28:
IF?!? I am sorry dude, but I am going to smoke you. You are just like rick, always looking for excuses to get out of races http://web.camaross.com/bb/wink.gif (j/k rick) Man, it has been a while since I have talked this much crap. HAHA, it is so fun. Seriously, change your wires, because I don't want to hear any excuses WHEN I beat you.

EDIT: Brook, My offer still stands, and it is guaranteed cash!

</font>

for an LT-1 with a mild cam, you sure do talk trash.

Seriously, excuses aside, you will not smoke me, even though I'm only bolt-on, it will be a good race no matter who wins. I hate people that talk trash with monor mods, so grow up, please.

[This message has been edited by BLK97Z28 (edited September 11, 2002).]

haha, lighten up dude! I am freaking playing. We will run when you fix your wires, and we will see what happens. It will be fun no matter who wins. I am just bored and wanted to talk some trash.



[This message has been edited by jimbo95Z28 (edited September 11, 2002).]

<font face="Verdana, Arial" size="2">Originally posted by aggiez28:
id put my $$ on aaron

. http://web.camaross.com/bb/smile.gif</font>

with a new motor and engine work, he better beat me. Lots of pressure on him http://web.camaross.com/bb/biggrin.gif

300 posts....weeeeeeeeeeeeeeeeeee

http://web.camaross.com/bb/tongue.gif

So anyway is the big race going to happen next wednesday between ed and steve or is it going to turn to another **** talking match?

Scott

------------------
2000 Silver stalled A4 Bird
soon to be slammed and cammed