College Station/Bryan Car club members!

This is the new thread that I am starting for B/CS car guys so that the other one doesn't get locked. Hope to see you all at car club!

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

Man Aaron, I didn't know we were "members"...j/k. Seriously though, David told me he rode in your car last night. I will be out next wed at CC to see the racing so give me a ride if poss. My slow ass truck won't be able to keep up. Mid March is the date set to have mine done. You better be ready for some racing. WE will have some more races like your truck against my Camaro, me winning like always of course. Gotta talk some smack since everyone else has been http://web.camaross.com/bb/biggrin.gif

Sorry dude, but by mid march you probably won't want to run my car any more. I have a full time job and no bills, so where does my money go? I bet that by next march I will be somewhere in the low 11's to low 10's. I will be more than happy to take you for a ride in my car on wednesday, or this friday for that matter. I will be at hastings in bryan if you want to show up.

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

I was there last night, tall guy with the silver V6 bird w/ GFX. Good to finally meet you all and hope to have fun these next 4 years.

BTW i also can't wait to see Hanz and Franz watch their orgy b/f out to run 1-BAD80Z and Rick. That's gonna be a riot.

Scott

------------------
2000 Silver stalled A4 Bird
soon to be slammed and cammed

"Hanz and Franz watch their orgy b/f out to run 1-BAD80Z and Rick"

LMFAO

jusitn

Does anybody have Tony's E-Mail address ??? Or phone # ???? Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Rick , have somebody with a truck come along so we can swap out tires for the Hanz & Franz A$$holes !!! I want ANYBODY that is capable to SMOKE their A$$ !!!! Those two are COMPLETE A-Holes !!!! My new trans is already in the works !!! This time there won't be any mistakes !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed I have a floor jack to bring with to swap tires between races. We need to put this FOOL in his place !!! To claim a win because I smoked my trans is STUPID !!! I was THREE cars ahead when the tranny went !! AND he was spraying.

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

Tony is a great guy and his car is very fast but he is not a BCS boy anymore...this is a BCS matter.
Rick

hmm

good luck!

I think that tony should come down. Even though he is not a BCS boy anymore, he should have some fun with them too. I would like to see anybody and their dog beat these two no matter where they are from. If I had more motor I would take them out too.

also, brook, if we keep on with the other page, they are just going to lock it anyway. We might as well start a new one.

Ed, do you think that your car will be ready in time for car club? I might have a friend who can carry your tires for you or rick.


------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

[This message has been edited by jimbo95Z28 (edited September 06, 2002).]

Ed and Rick, I will be in my truck if ya'll want to do the tire thing, just let me know. I am off on Wednesday so I can help ya'll out plus I want to see all the action. Look for the pewter reg cab Chevy 4X4, or Rick I will probably have Brittany S with me so you can just see her. And Aaron, you better have a 10 second car by March, b/c you will be racing one. Better learn how to shift that six speed. I prob won't be out on Friday but I will come out on Wednesday and catch up with everyone. Since I sold my Camaro I had pretty much quit going.

I don't know the guy, but he is a *****. I think he is one of Fred Brown's sons. I saw him and told him I had some things for the car like the t-top holders and shades, but he just blew me off so I sold them. He hasn't modded it yet, he said I had did all the mods he wanted. I tried selling him my CC305 but he didn't want it.

I wish that I had known that you had that 305. I would have bought it off of ya. Would have been a better cam for building a blower motor. Oh well. You had better have a 10 sec car too, just because I want some more guys whose cars have balls out at car club. We have like 4 now. Well, i guess that I need to go back to work now.

PS brook, why are you so against starting a new thread? Just start posting here, it isn't like it's going to kill you.

Well,
I have had three diff people in the last two days say this guy has a 422 in it and one other guy that says he runs 9's with a 250 shot....
I am wondering now about this since the guy told me he only had a "bolt on" car. I did hear a really small cam in it but that doesn't mean he couldnt have alot of cubes...I have heard 382's with a small cam that sound like a bolt on car...
I think this guy might be hustling everybody...
Rick

Interesting.......

Scott

------------------
2000 Silver stalled A4 Bird
soon to be slammed and cammed

Ok guys yall ready for this $hit?
I don't mind being beat but when someone tries to hustle me and play me for an idiot thats when the ass kicking starts...
this bitc@ that shows up last week in a black SS says he has a bolt on car...and sprays..says he wants to race for 200, i think ok that sounds cool..well after a little research look at what I found...
I want to thank Brooke Martin for bringing this up and saving me 200-500 bucks in hustling money...
Rick
heres a few emails....
ps. this guy is listed in HOT ROD GOSSIP.COM as #3 name: "Steven"
he is packing a 422 stroker motor w/ a 250 shot of NOS, a 12-bolt rear, and ET Streets and is apparently running high 9s in the
quarter. All VERY diff from what he said to me and EVERYBODY else at car club that night...fuc@ing POS!

This is the message:

I know you were out at O'Reilly last night, when that guy in the Black Z28 from
Katy came up and started talking ****.

I was telling my roommate about it and he swears he knows the guy. His name is
Steven Faraday. Right before I left "Steven" and Rick were setting up a race
for money for next Wednesday night.

Anyway, I need you to tell Rick (or Rich) in the white T/A and the guy who was
driving the white cavalier last night (usually a Pewter WS6) to call off the
race. The guy they are going against has a 422 stroker motor w/ a 250 shot of
NOS, a 12-bolt rear, and ET Streets and is apparently running high 9s in the
quarter.

I can't make it out there next week and I don't have any contact information for
them. You seemed to know them fairly well, so I figure you can get ahold of
them.

Thanks,
Drew

I don't know what he told him about the time I was leaving, but he told us
earlier that night that he had full exhaust, a cam, and 150 shot and was
running 13.5s.

He is currently listed in the top 5 Street Kings on www.hotrodgossip.com. (http://www.hotrodgossip.com.)

Joe, my roommate, said he will regularly toy with anyone, winning by a car
length or two and acting like he doesn't know **** about cars so others will
race him. His usual deal is $100 on the first race, which he might lose,
then $500 the next time, where he will once again sandbag and barely win.
His dad paid for everything on his car, and gives him all sorts of money, so
losing a hundred don't mean ****.

Later

I think it's ass kicking time, this aint Houston and POS like that need to keep that crap over there, here in town we do heads up for rep or fun and sometimes money but everyone is fair about it and hustles no one...

Just ask him to pop his hood Rick. If he says no then tell him to fu(k off. Its one thing not to tell anyone what you have, its another to lie. run him once, let him sangbag it and lose, then don't run him again. lol, that should piss him off. what a tool.

Sounds like the race is off. I still want to see ed run these guys with his slicks and a good tranny. i don't think that it would be that great of an idea for Rick with your slipping ass clutch to run them. Maybe a run for rep, but you are right, this is some crap. If this is true though, he may let you win the first one, and then just quit. Don't run again for the $500. That would be pretty freaking funny! Oh well, screw hanz and franz. If they show up, we will just tell those tools to **** off. I guess that picking on people who actually work on their cars themselves is the way these two get off. We don't need that kind of crap around here.

------------------
95 White t-top Z28 M6 Mods include: Hotcam kit, Mac midlengths, flowmaster, Homemade CAI, airfoil, TB bypass, !EGR, !AIR and a B&M ripper shifter.

not even Ed can beat this guy...Eds car at best is a 10-11 second car....I wish we had a nine second car to kick his ass....
ps. when you pop the hood a 422 looks just like a 346 so no luck there either Chris...
Rick

<font face="Verdana, Arial" size="2">Originally posted by PhatT/A:
not even Ed can beat this guy...Eds car at best is a 10-11 second car....I wish we had a nine second car to kick his ass....
ps. when you pop the hood a 422 looks just like a 346 so no luck there either Chris...
Rick</font>

Hey, don't call the race off, when he comes in and gets out of his car, I'll spray his rear tires with wd40. Then watch and laugh as he doesn't get any traction off the line. oh well.

<font face="Verdana, Arial" size="2">Originally posted by BLK97Z28:
I'll spray his rear tires with wd40. Then watch and laugh as he doesn't get any traction off the line.</font>

That would be hilarious! http://web.camaross.com/bb/tongue.gif

Yeah, His name is Steve Faraday. And is car is ****ing fast. His best pass is a 10.30 I believe. He will beat just about anybody in CS. Even if Tony hooked his bottle up he would still probibly get beat. Anyways don't waste your time with him, he's fu$%ing fast.

Scott

------------------
Speed Demon Motorsports

'95 m6 z-28
Crower Cam 212/219 474/495 110 ls
stock heads, tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

whats his setup Scott?
thanks for the info!
Rick
ps. did my brother and you ever do the drive shaft deal yet?


[This message has been edited by PhatT/A (edited September 06, 2002).]

<font face="Verdana, Arial" size="2">Originally posted by 1BAD80-Z:
Rick , have somebody with a truck come along so we can swap out tires for the Hanz & Franz A$$holes !!! I want ANYBODY that is capable to SMOKE their A$$ !!!! Those two are COMPLETE A-Holes !!!! My new trans is already in the works !!! This time there won't be any mistakes !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif Ed I have a floor jack to bring with to swap tires between races. We need to put this FOOL in his place !!! To claim a win because I smoked my trans is STUPID !!! I was THREE cars ahead when the tranny went !! AND he was spraying.

</font>

Ed, Ed, ED !! take it easy man.. its just a race.. I am sure there will be more..
http://web.camaross.com/bb/biggrin.gif
The best time to get him will be when he as a big chip on his shoulder/fender.

Get your car back going and let him take you again.. then up the anti with some bucks and bingo.. your new transmission gets payed for by MR. LS1 racer.


The mental part of it can be as fun as the physical.


[This message has been edited by gs400tx (edited September 06, 2002).]

I am trying to get the info, but I found out today while at the shop that he has one of the fastest fbody's in Houston. It is insane. I know alot of big motor LS1's in houston that are telling me he is King Kuhmayuhmayuh!!

Mazoch

------------------
Speed Demon Motorsports

'95 m6 z-28
Crower Cam 212/219 474/495 110 ls
stock heads, tb, rockers, & gears

12.32 @ 112.08 1.779 60'
n/a

e-mail: solid95z@slowcar.net

Don't worry my merry men , I still have a THIRD stage of spray to hook up ( which I WILL !! ) And this time I won't play his game , we'll play by MY rules !!! I'll make an excuse about coming out of the hole , and we'll go from a roll. My motor puts out about 525 , and with 375 of nos ( on three stages ) , We'll see who the REAL punk is !!! He definitely need to send this guy packing back to H-Town with a few bruises !!!! Espesially Mr. Muscle !!! There's NO way he's putting out 900 horses !! My problem being the hole shot , I have NO suspension mods , so the race will be from a roll , which is where MY game is !!!! The tranny comes out tomorrow , and STUPID me , didn't put the stiffer racing spring in the pump to handle the nitrous. I WILL be ready Wed. Nite !! The motor was built to handle just about anything , but now that Ya'll have told me the inside scoop , I "WILL" be ready !! After the race , it'll be time for a serious a$$ woopin on Mr. Hustler !!!!!!!! See ya'll at Hastings on Wed. nite !! Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

I Still have a FOURTH stage to put on !!!! http://web.camaross.com/bb/smile.gif http://web.camaross.com/bb/smile.gif ED

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

rick,

did u bite off more than you can chew ?

lol... jk....

street racing is all about run what you brung, and there will always be someone faster than you.

did you see the old rules on that street king site ?NUMBER 3 "STREET KING" IS FOR CARS RUNNING 9.50 TO 8.70 ( 5.70 BREAKOUT FOR 1/8 MILE)


let me know if this race will go down,

i may come just to watch,


jason

check out the price of the 422, and the dyno graph !


http://www.motorsporttech.com/2002_website/FBengine.html

<font face="Verdana, Arial" size="2">Originally posted by Twospar:
rick,

did u bite off more than you can chew ?

lol... jk....


jason
</font>


Never!
Rick

hey whats goin on everyone.ive seen that camaro a lot on that hotrodgossip page. anyhoo let me know where you all hangout down there and ill check it out. hit me up on my aim lethalgreen95z28..

------------------
Quench my thirst with gasoline...

<font face="Verdana, Arial" size="2">Originally posted by BLK97Z28:
Hey, don't call the race off, when he comes in and gets out of his car, I'll spray his rear tires with wd40. Then watch and laugh as he doesn't get any traction off the line. oh well.</font>

That's funny. this dude is in need of a major a$$ wooping.

phat t/a's angel... is that jennifer or is rick gonna get in his ass whooped???(by jennifer)

justin

[This message has been edited by 59apache (edited September 09, 2002).]

Hey Arron when r u going to race me, since your motor is broke in.

Wes

------------------
02 Silver Firehawk A4
Free mods
RWHP-323
RWTQ-333
60'-2.02
1/8-8.43
1/8-85.6
1/4-13.04
1/4-106.8

Wes, I will run you whenever you want. We can see about this Wed, but if all the big boys run I may not want to. We may get more attn than we want from the local police. Just let me know when you want to run, and we can arrange something. I also have a run already lined up for Wed. We will play around soon though. talk to you later man

<font face="Verdana, Arial" size="2">Originally posted by jimbo95Z28:
Wes, I will run you whenever you want. We can see about this Wed, but if all the big boys run I may not want to. We may get more attn than we want from the local police. Just let me know when you want to run, and we can arrange something. I also have a run already lined up for Wed. We will play around soon though. talk to you later man</font>

Word.

did yall ever race?

Nope, I don't think that wes will want to either, because he supposedly got beat by tim with the "LT WHAT?" sticker. When I ran tim, he left early, but I was pulling on him the whole time. No offense to Wes, but I would probably beat him. Not bad, but enough. I would still be willing to run him if he doesn't think so. I am not trying to talk smack either, but I just do think that I would win.

I think YOU should race the Jetta from a stop, lol
or from a roll. he's pretty fast, but not quick at all. When we went from a stop I had 4+ cars on him by 80.

Originally posted by BLK97Z28
I think YOU should race the Jetta from a stop, lol
or from a roll. he's pretty fast, but not quick at all. When we went from a stop I had 4+ cars on him by 80.

Yeah,
Nitrous launches and a mis-shift don't add well together :)

Hey, i was wondering if you were on the board here. I think we'd have a good race in the quarter when you get 22psi running. You'd be nice and give me a headstart, then your turbo would spool and I would get smoked by a Jetta. lol. Perhaps.
your car is louder than Rick's car at WOT.

Well, if I'm able to get the DRs I want for the track, I'll be able to do my N2O launch and hopefully make it stick without breaking an axle.

Re: Exhaust
Yes, it's loud. And hopefully, soon, it'll be a bit quieter. I kinda cringe a bit pulling near cops now, but at least at lower rpms they're looking around for the loud turbo diesel truck that MUST be emitting that noise.