Jet Hot Mac Headers

I read on a post in the LT1 section that Jet-Hot has Coated mac headers + coated Y available for like $560. Is this true ? Any webpages, links or contacts available for this promotion ?

Thanks

and how about a group purchase?

that'd make my day

Originally posted by 96TransamConvt
I read on a post in the LT1 section that Jet-Hot has Coated mac headers + coated Y available for like $560. Is this true ? Any webpages, links or contacts available for this promotion ?

Thanks

You are correct about the price. I would more than happy to list some prices, what year and set up did you need? Let me know.

Thanks
Chris
chris@jet-hot.com

I would be in on a group purchase in about 2-3 weeks from now. My 1994 Z needs some new breathing.

Oh yes I have the single cat outlet.

94/95 Style Header + ORP is what I'm looking for.

Thanks

Hey chris, whats the price for the headers only? I need 99 MAC LS1 headers, coated. I don't need a y-pipe since I'm doing a custom system. MAC ball flange connectors would be nice to get with them, don't need them coated though. Thanks!

count me in....i hear those are the best for lt-1's

I got the all the Mac part numbers and wanted to list the normal camaroz28.com price for these headers. I could start a GP but would need at least 10 orders. The prices show the price of parts all fully coated in&out with the sterling silver finish:

TF3593 (93 only single cat cars) $536+s&h
TF94957 (94-95 single cat car) $536+s&h
(The 2 numbers above include the set of shorty style headers and a Y pipe cross over which is all coated)

TF3597 (95-97 w/ dual cats) $878+s&h
TF9597 (95-97 wo/ cats) $704+s&h
(The 2 numbers above include the set of shorty headers and long connecting pipes all coated)

Let me know if there are any questions or if I missed a part number. If someone need another brand of headers they would like Jet Hot coated, let me know and I'll see what I can do.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

Originally posted by Mike94ZLT1
Hey chris, whats the price for the headers only? I need 99 MAC LS1 headers, coated. I don't need a y-pipe since I'm doing a custom system. MAC ball flange connectors would be nice to get with them, don't need them coated though. Thanks!

You are looking for the Mac LS1 headers TF4398. These are listed as a set of mid length headers and includes the off road Y pipe. I can offer that set up,fully coated in&out with the sterling silver finish,for $750+s&h.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

Would the link below correspond with part # TF94957
Also is this part # for the ORP or for 1 cat Y ?

http://www.macperformance.com/store/product1.cfm?SID=3&Product_ID=457

Originally posted by 96TransamConvt
Would the link below correspond with part # TF94957
Also is this part # for the ORP or for 1 cat Y ?

http://www.macperformance.com/store/product1.cfm?SID=3&Product_ID=457

The link you provided is the and header/Y pipe set up that I listed for TF94957. The TF94957does not come with a cat. It is designed to bolt up the cat.

Thanks
Chris

Okay so TF94957 is shown w/ an ORP or do you actually have to buy another Y pipe if you did not want cats

Originally posted by JetHot Coating
The link you provided is the and header/Y pipe set up that I listed for TF94957. The TF94957does not come with a cat. It is designed to bolt up the cat.

Thanks
Chris

Originally posted by JetHot Coating
You are looking for the Mac LS1 headers TF4398. These are listed as a set of mid length headers and includes the off road Y pipe. I can offer that set up,fully coated in&out with the sterling silver finish,for $750+s&h.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

Hey, thanks for the reply. Is it possible to get just the headers though? I only need the headers, coated of course. I'm going with an x-pipe so the y-pipe is of no use to me. Thanks!

Originally posted by Mike94ZLT1
Hey, thanks for the reply. Is it possible to get just the headers though? I only need the headers, coated of course. I'm going with an x-pipe so the y-pipe is of no use to me. Thanks!

I spoke with Mac late yesterday. They informed me that they would not separte the headers for the Y pipe. I could only offer the headers with the Y pipe.

Thanks
Chris
chris@jet-hot.com

Okay I'm in. When should I place my order? Come on we need 9 more orders...I want my headers installed before the opening season this January.

I might be interested also if this gets close to getting done.

Any more in for the GP? Chris, what is the time line for the GP and what would shipping be to 32836. If you could email me , Thanks.

Originally posted by dogboy
Any more in for the GP? Chris, what is the time line for the GP and what would shipping be to 32836. If you could email me , Thanks.


It looks like I have 5 people interested right now. I hope to get this GP going late next week. The shipping would run $29.

Thanks
Chris
chris@jet-hot.com

I'm still in.

I'm in. WHats the pricing going to be like? My LT are forever draggin in my driveway.:mad:

i would be in, is the prices that were listed the ones that would be for the gp?

Yeah, what would the GP price and how long would that run?

It will take me a few weeks to get some money up, but even if I missed out on a GP, I could handle 550ish shipped.

Originally posted by montess87
i would be in, is the prices that were listed the ones that would be for the gp?


We are getting very close to being ready to start a GP. It looks it can start by the end of next week. I've re-listed my post with the Camaroz28.com prices then added the GP prices:
************************************************** **
I got the all the Mac part numbers and wanted to list the normal camaroz28.com price for these headers. I could start a GP but would need at least 10 orders. The prices show the price of parts all fully coated in&out with the sterling silver finish:

TF3593 (93 only single cat cars) $536+s&h** GP PRICE $513+S&H
TF94957 (94-95 single cat car) $536+s&h** GP PRICE $513+S&H
(The 2 numbers above include the set of shorty style headers and a Y pipe cross over which is all coated)

TF3597 (95-97 w/ dual cats) $878+s&h**GP PRICE $840+S&H
TF9597 (95-97 wo/ cats) $704+s&h**GP PRICE $668+S&H
(The 2 numbers above include the set of shorty headers and long connecting pipes all coated)

Let me know if there are any questions or if I missed a part number. If someone need another brand of headers they would like Jet Hot coated, let me know and I'll see what I can do.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

************************************************** **

Are your paying options still the same?

Originally posted by ticket_me_redz
Are your paying options still the same?


Yes, the 2 pay plan is still an option.

Thanks
Chris
chris@jet-hot.com

Glad to hear it. I'm pretty much set then. Just waiting on official word its a go.
Thanks

i am definitely in! i have been waiting for this group buy to come along! come on let's get this going guys!! how many people are in now? just curious, what is the two pay plan?

is this a go??

i just need to know what the latest is to get these at that price becaue I am extremely interested!!

Judging from the last post from Jet-Hot, I'm thinking this is going to start around January 1st or so. The two payment method allows you to pay for your headers in two equal seperate payments. And that helps a lot of people out!

if you choose the two payment option are the headers not shipped until the second payment is made or do they just charge your card at a later date?? what are the details? just curious.

I'm not too sure on when they ship. I'm not going to say without being certain. I'm sure that Chris or someone from Jet-Hot will clarify this next time they check the post. :)

what are we waiting for?? we have ten people right?

What we are waiting on is for Chris to officially say the GP is on. If you will read one of his earlier posts he said last week he expected it to be the end of this week for the GP to start. Just be patient man!! :D I'm just as anxious as you are to get my headers. Look at it this way, if you have waited this long, a few more days won't hurt.
Later,
Joey

yeah, i am a little excited:D! i can't wait! i am hoping to see some really good gains because i already have a cam installed and i have been waiting to get headers for a little while. i will finally be able to utilize my cam! yeahhh! i just hope they process and ship the orders quickly.

You can always email him and ask what's the status but I'm sure if you give him til say Wednesday or so, I'm sure he will have responded by then. Remember, Christmas just passed so they may be jumping around there to get orders out or something.

I want in on this deal too!! Gotta spend that Christmas bonus money :) Will he get in touch with us or what?

I'm sure he'll let us know as soon as he catches up with all of the other orders he is having to do. I'm hoping to get in on this too!!!

I'm in:D

Looks like we got more than 10 interested!!! I know I've been waiting on this to come around for a while.

me too!! i'm excited!! I hope he checks this thread soon

Just spoke to Jet-Hot and Chris will be back to work on Monday. Just thought those interested might want to know.

right on man, thanks for letting us know.

sweet....I guess we can let him take a little vacation

Just curious as to what ya'll are planning on using in terms of header bolts and gaskets? Anyone going to get the LT4 Knock Module?

:) I want in on this deal also !! :D Here are the part #’s I need for my 95Z … :cool:

MACTF94957 (94-95 single cat car) headers/y-pipe JET-HOT Sterling Silver Coating
MAC49395 off-road pipe ??( not coated )?? Not sure if to get it coated ? :confused:
Here is a web site with PIC of the headers/y-pipe THAT has , sold ME to get in on this GP ..:bow:

http://mail.chartermi.net/~stereomandan/pics/headers.jpg

might ask chris to check the other pic’s of the headers workmanship( welding )…:eek:

here is pic at bottom web page of OFF-Road pipe that replaces the !cat! ..:)

http://www.horsepowersales.net/cfexhuast.html

thanks:) :)

:D i forgot to add the thread that shows other pic’s of the headers welding … :eek:

http://web.camaross.com/forums/showthread.php?s=&threadid=206914&perpage=15&pagenumber=1

might ask chris to check-out the pic’s ..
thanks:)

I am getting the LT4 knock module, I dont know which gaskets yet, as far as header bolts go, Auto Zone, they cost me 8 bucks:) A guy I know used them with his hooker's and recomended them. I gotta save money somewhere with all I'm spending on everything else!

Guys I'm definitely in on this! I need to toss the stock manifolds badly :(

I'm going with the ARP bolts and the Fel-Pro gasket. Also doing plugs and wires at the same time and replacing some O2 sensors.

where are you guys going to order your arp bolts and felpro gaskets? what are the part numbers??

Ordered mine from Summit. I got the FPP-1406 for the Fel-Pros. I got the ARP-400-1210 1 inch header bolts. Both have been spoken highly of on here.

Sorry, I was out last week. It looks like we have more than 10 people for the GP. THE GP STARTS TODAY!

The price are listed below for the GP. Please feel free to call me at 1-800-432-3379 ext 110. The GP will run for 2 weeks (ends on 01/16/04).

If there are any questions or if I missed anyones questions. Please email me at chris@jet-hot.com (or feel free to call me). I have a few emails I received since last week, thet are being answered this morning.

Thanks
Chris
chris@jet-hot.com


Originally posted by JetHot Coating
We are getting very close to being ready to start a GP. It looks it can start by the end of next week. I've re-listed my post with the Camaroz28.com prices then added the GP prices:
************************************************** **
I got the all the Mac part numbers and wanted to list the normal camaroz28.com price for these headers. I could start a GP but would need at least 10 orders. The prices show the price of parts all fully coated in&out with the sterling silver finish:

TF3593 (93 only single cat cars) $536+s&h** GP PRICE $513+S&H
TF94957 (94-95 single cat car) $536+s&h** GP PRICE $513+S&H
(The 2 numbers above include the set of shorty style headers and a Y pipe cross over which is all coated)

TF3597 (95-97 w/ dual cats) $878+s&h**GP PRICE $840+S&H
TF9597 (95-97 wo/ cats) $704+s&h**GP PRICE $668+S&H
(The 2 numbers above include the set of shorty headers and long connecting pipes all coated)

Let me know if there are any questions or if I missed a part number. If someone need another brand of headers they would like Jet Hot coated, let me know and I'll see what I can do.

Thanks
Chris
1-800-432-3379 ext 110
chris@jet-hot.com

************************************************** ** :) :D :D

Originally posted by JetHot Coating
Sorry, I was out last week. It looks like we have more than 10 people for the GP. THE GP STARTS TODAY!

The price are listed below for the GP. Please feel free to call me at 1-800-432-3379 ext 110. The GP will run for 2 weeks (ends on 01/06/04).

If there are any questions or if I missed anyones questions. Please email me at chris@jet-hot.com (or feel free to call me). I have a few emails I received since last week, thet are being answered this morning.

Thanks
Chris
chris@jet-hot.com


:) :D :D

Should that say it ends it two weeks on the 16th?? and not the 6th??

Originally posted by Chevycobb
Should that say it ends it two weeks on the 16th?? and not the 6th??


Opps!! I must still be sleeping this morning. I just fixed it.

Thanks
Chris

:bow: :) :D :cool:
I just ordered my MAC headers/y-pipe & off-road pipe ,
both with JET-HOT Sterling Silver Coating...thanks chris...:D :) :cool:
thanks
clay

I ordered mine.

just ordered my arp bolts, felpros, and 94-95 style jet hot coated midlengths and y-pipe!! wooohooooooooooooo!!!

what are you gonna do to keep your plug wires from burning??

Who got the ORP

how long can we expect until they ship out??
also, anyone doing firesleeves??

I ordered mine around 2 today. Chris said it would be about 2 to 2 1/2 weeks before they shipped due to having to order them, get them in, get them coated, and then get them out. Now that was for me. They may have had some MACs already when ya'll ordered ya'lls before me.

As for burning wires, I'm thinking of going with Accel ACC-9037 from Summit. I'm not too keen on making mine own using the Taylor over the valve cover kinds. I'll use wire ties as needed and just be careful with the routing. If you tie them up good they shouldnt move. I might do the fire sleeves but more than likely not.

Originally posted by 1.8ttolt1
how long can we expect until they ship out??
also, anyone doing firesleeves??


Depending on locations, we are looking at 2- 2 1/2 weeks. We had to order more. I checked with Mac late yesterday and was informed that nothing was on back order.

Thanks
Chris
chris@jet-hot.com

can someone explain how the 2 pay plan works?

nevermind, i read some old threads and found out, I gotta evaluate my spending habits/funds, but chances are I might get in on this. I really dont want to put those damn manfolds back on after i get this head gasket replaced

now I just found out the AIR fittings are different thread sizes for the 94-95 and the 96 headers. is there anyway to get them to fit?

Which year has the thread problems? This could suck.

is this still going on, i want in. how much for shipping to 46151 martinsville indiana? where do i sign up?

Originally posted by nates95m6
is this still going on, i want in. how much for shipping to 46151 martinsville indiana? where do i sign up?

just give them a call(number is in this thread). I ordered mine up this morning

:) :D It looks like we have more than 10 people for the GP. THE GP STARTS TODAY! 01/05/2004 ...
The GP will run for 2 weeks (ends on 01/16/04)…

If there are any questions or if I missed anyones questions.
Please email me at chris@jet-hot.com (or feel free to call me)
at 1-800-432-3379 ext 110….

Thanks
Chris
chris@jet-hot.com

i ordered mine on monday 01/05/2004 ...:D :) :cool:

Ordered mine 1/10/04 :thumb:

anybody get theirs yet?

Not yet. I dont look for them until Wednesday or Thursday of next week (1/21 or 1/22). But then again I did order mine on the 6th. Someone post as soon as they get theirs in.

I already paid for mine & havn't received them yet. I feel them coming though (wishful thinking). I need to order up some gaskets & a Cat soon.

i just contacted jet-hot via telephone and the way he described it they haven't even received the headers from mac yet. maybe i misunderstood what he was saying but he said "we are still waiting for the parts..." sooooooooooo

is anyone concerned about this??

as long as i get them when its time to put my car back together

Hmmm....I thought we were in the time frame now where we could expect them to be shipped any day now.

I know my car is sitting there waiting for these cause I have to change plugs, wires, and change bad O2 sensors. I'm not going to do any of the above cause it would easier to do it all at one time. I checked my credit card today for the last 5 purchases on it and a charge from Jet-Hot isnt on them.

I know unexpected things can happen. If there is a problem on the MAC end, there's nothing Jet-Hot can do about that. Kind of disappointing cause I'm anxious to get them but I'll be patient.

I read the post yesterday. We have shipped a few of the orders already and we have a few more already received in process. I called Mac yesterday to verify all order are in route to Jet Hot. They were to call back today. I haven't received any calls yet. I'll keep you posted.

Thanks
Chris
chris@jet-hot.com

any updates, any orders recieved?

Originally posted by Zack
any updates, any orders recieved?

I have little good news. When the GP was started, I contacted MAC to make sure they had the headers in stock. I started the GP and placed the orders as needed. We did received a few in(which were coated and shipped out already). I was informed late Friday that the balance wasn'r shipped yet. Mac is finishing the headers and is looking to ship the headers at the end of this week.

Thanks
Chris

which of you guys are the lucky ones whose order shipped. i know i won't get mine until mid-late february.

Not me.
I'm hoping for mine about the middle of Feb. :(

I want in on this deal but need to know when the deal ends
thanks
Brandon

greeneyes56@hotmail.com

Originally posted by Brandon94Z28
I want in on this deal but need to know when the deal ends
thanks
Brandon

greeneyes56@hotmail.com

it already ended

Originally posted by Zack
it already ended

so its done finito, no chance to get in on it now? If so then I am pissed. I just got my income tax check back today. :mad:

;aodsfuhgsligahbpi[sguba;isgbjgba[SDOJGB[DGJBFDBSAOLFBNADFSLKNJBSADB

grrrr.....:irk:

:alert: :alert: :shame: :eek:
It looks like we have more than 10 people for the GP..
THE GP STARTS TODAY! 01/05/2004 ...
The GP will run for 2 weeks (ends on 01/16/04)…

Thanks
Chris
chris@jet-hot.com
i ordered mine on monday 01/05/2004 ... :D :)
:alert: Has anyone rec'vd their Mac headers yet ... :alert:

i have contacted mac and they said that they will have no headers ready for two more weeks because they have not welded the flanges on yet. i don't beleive that any orders have been shipped or will be shipped until the end of february, beginning of march. i know this news is very dissappointing for all of us. if an authority can provide different, more optimistic news, disregard my post. until then :(

:( :( :(
Say it aint so Chris, say it aint so....
Thanks for the info 1.8ttolt1
:cry: :cry:

Originally posted by 1.8ttolt1
i have contacted mac and they said that they will have no headers ready for two more weeks because they have not welded the flanges on yet. i don't beleive that any orders have been shipped or will be shipped until the end of february, beginning of march. i know this news is very dissappointing for all of us. if an authority can provide different, more optimistic news, disregard my post. until then :(

****in ****! it sucks a ****load for me since im gonna need them to drive my car since its apart for a head gasket swap. At leaet you guys can still drive:(

I'm feeling you. I'm in the same boat. My car wont run worth a crap cause I've got bad plugs and O2's to replace. I'm waiting on the headers to come to do it all at once. My car has been sitting close to two months now. It crapped out in mid December and then I saw this GP so I held off. Still holding!!!! Its going to be like getting a new car when I finally get it going cause its been so long since I've driven it.

On a side note, and I'm not speaking for Chris, just simply stating what he told me in his email. I emailed him yesterday and he emailed me back saying he had not received the headers yet but Mac told them they would ship either yesterday (Friday) or Monday and he was waiting on more information from them. So hopefully Mac has our GP order ready and that's what cleaned them out again.

is it to late to join in.. i can pay around the 17th

Originally posted by OpCode
is it to late to join in.. i can pay around the 17th


It looks like we have more than 10 people for the GP..
THE GP STARTS TODAY! 01/05/2004 ...
The GP will run for 2 weeks (ends on 01/16/04)…

I have a question for all of you that participated in this GP. If you guys are in a non-emissions state are you going to be using an ORP? If so, would you be willing to sell the starter pipe for the catalytic converter?

Well, guys this is the latest so far. I just called to make sure that they had received all payments from me. (I had them do two separate, for certain reasons) She said yes and that they were scheduled to ship out on the 5th. So thats not too bad. As long as they go out then. :)

BTW: Thanks Chris....:cool:

Cool. If all of them go out on the 5th then that will be great. Thanks for the update.

And I second that....thanks Chris for the good deal! :)

scoobysnax83
that they were scheduled to ship out on the 5th. So thats not too bad. As long as they go out then.
:alert: :alert:
i just rec'vd my credit card statement with a ( for me a 2 payment plan )
$$$.$$ posted on 6-jan-2004 ... :shock: :( that's almost 30 days ago...:confused:

Same thing happened to me man. Transaction was placed on the 6th, charged to my card on the 7th. I emailed Chris about it and he said it was standard policy for them to charge the card once the order had been placed. I went with the two pay plan myself. I thought they charged it first when they sent the headers and a second time the next month. Chris said that's policy though. Just going off what his latest email said. I'm sure they will get shipped out this week.

Ok, guys, give him a break. We bombarded him with orders for a specific header that he and MAC may get the equivalent of in a year. It takes some time. It sucks that you all that ordered in Jan are still headerless, but it is a group purchase. So MAC is probably waiting for the whole batch to be done in order to ship. I just hope MAC doesn't go for Quantity over Quality :eek:

I know Jet-Hot would never do that ;)

The GP will run for 2 weeks (ends on 01/16/04)…
:eek: i'm not tring to start any flaming here !
:shock: But i think we ( the GP ) when the GP time ended on 01/16/2004 then jet-hot could've determind how many orders , then , charged my( our ) credit cards on Monday jan-19-2004!!! :D
am i wrong to think this way ! ;)

Originally posted by PatriotRed95z
:eek: i'm not tring to start any flaming here !
:shock: But i think we ( the GP ) when the GP time ended on 01/16/2004 then jet-hot could've determind how many orders , then , charged my( our ) credit cards on Monday jan-19-2004!!! :D
am i wrong to think this way ! ;)

Do you mind me asking you what the difference is, if you receive your headers? I'm sure that Chris will refund your money if you are that disgusted. Let another member who has the patients, to get in on the deal. :blah:


BTW: Where you at Chris? There sure is a lot of flaming going on here for you to be nowhere to be found :think:

I mean don't take it the wrong way, but, defend your territory, man. :)

<I just hope MAC doesn't go for Quantity over Quality>

I agree with Scooby on that one.

As far as flaming goes, I dont see it quite like that. I just think everyone is anxious to get their headers. Not because they think they are getting screwed, its just most are waiting to finish up projects. I agree we probably hit MAC with a lot of requests for headers at once. You will see a previous post of mine stating that I would be patient and would understand if it was something on the MAC end of things, which it appears to be. Stuff happens and JET-HOT cannot coat headers they do not have, especially if MAC is late getting the headers to them. So this is something out of his control. Cant help that. The reputation of JET-HOT on this board speaks for itself. Chris has always responded to my emails promptly. I was a little confused about the two pay deal but I understand where Chris is coming from. I have no problem with company policy.

As for wondering where he is, he's probably working his butt off to get the headers out to us! :D

I for one really appreciate Chris getting back to my emails so quickly and for getting us discounted prices. Keep up the good work man! :bow:

If the need arises, I'll buy from Chris and JET-HOT again.

scoobysnax83,

I see in your post you say the LT4 Hot Cam is too small...what makes you say that? I've been thinking about getting one for my 94Z. Did you install it yourself? Any times with your current setup?

i think if you get the lt4 hotcam you will wish you got something bigger.i have an xe 224/230 which is bigger than the hotcam, and i wish i would have gone w/ the 230/236. however on unported heads why bother w/ anything bigger than the 224? lt4 is good, but not great.

:eek:
i like to have said product in my hands when i buy a high dollar product.. :)
i am not questioning the reputation of JET-HOT( chris ) , not at all ... :)

< scoobysnax83 = I just hope MAC doesn't go for Quantity over Quality >...
i would agree and hope that this does not happen …

< ticket_me_redz = I just think everyone is anxious to get their headers , its just most are waiting to finish up projects > ...
:( this is how i was feeling ...

anxious is an understatement!

Originally posted by ticket_me_redz
scoobysnax83,

I see in your post you say the LT4 Hot Cam is too small...what makes you say that? I've been thinking about getting one for my 94Z. Did you install it yourself? Any times with your current setup?

Yes, the whole set-up was done myself.

i think if you get the lt4 hotcam you will wish you got something bigger.i have an xe 224/230 which is bigger than the hotcam, and i wish i would have gone w/ the 230/236. however on unported heads why bother w/ anything bigger than the 224? lt4 is good, but not great.

This practically explains it in a nutshell. It goes with the territory though that as you mod, your expectations will be higher. I thought it was great at first then, I just wished that I had gone bigger. I have plenty of head to take advantage of a bigger cam, I don't know what I was thinking. Someone just presented me with a good deal at the time on a used Hotcam.

BTW: I have only been to the track twice, with a total of 5 runs. All on Nittos. Until I figured out that I needed to toast the nittos before my run. I was getting 2.3 and 2.4 60' times. Once I got partial traction, I managed a 1.7 60' and ran a 12.8. With a better driver or more experience I think I could be in the mid 12's. Now, let me throw this out there. All those runs were made on stock manifolds with a severly cracked right bank, which we all know are not the best at flowing ;) So these headers may just in fact give me that full potential of my heads and cam. We'll see :D

I would like to say thank you to everyone. You have been very patient. I have been calling our rep at MAC everyday since last week. I was told that the headers were due to be shipped out on Monday to Jet Hot. I’ll be calling again today to see if this happened. I’ll keep you posted on the outcome later today.

Thanks
Chris
chris@jet-hot.com

So once the headers arrive at Jet-Hot, then we are looking at how long before they ship to us? About a week to 10 days? Just asking for an estimate. I'm not going to hold you to it. Thanks again for all the good deals.

Originally posted by ticket_me_redz
So once the headers arrive at Jet-Hot, then we are looking at how long before they ship to us? About a week to 10 days? Just asking for an estimate. I'm not going to hold you to it. Thanks again for all the good deals.

As you can image, these are all a high priority. Once we get the headers, we’ll need 2 days plus the shipping time to you.

Thanks
Chris

Awesome!!! I was thinking probably another week but I can live with 2 days:D

Thanks Chris!

What kind of Cat are you planning on using? I have the stock one with 104 K on it . Should I go with a 3" in/out cat?

You know, that reminds me, what do I need to complete this system into my current. I will be using no cat or whatever, but how do I connect it up? And whats the extra little pipe that comes with it?

Edit: OK, I figured out what that pipe is for. Is that pipe the exact same size as the stock I-Pipe? Or bigger? What size/type pipe should I get to replace the CAT?

Part # MAC49395 for the Off-Road Pipe ..
pic at bottom of web page that shows OFF-Road Pipe that replaces the !cat! ..
heres the web site :::

http://www.horsepowersales.net/cfexhuast.html
I will be using the Off-Road pipe in place of the !cat! ,,
I read some where here on the forum the off-road pipe size is 3”
same as the “ I “ pipe ..
if the exhaust tone is too load , I might have to put the !cat back on ,
then I would use that short starter pipe and butt-weld the pipe to !cat .. :eek:

Originally posted by PatriotRed95z
I will be using the Off-Road pipe in place of the !cat! ,,
I read some where here on the forum the off-road pipe size is 3”
same as the “ I “ pipe ..
if the exhaust tone is too load , I might have to put the !cat back on ,
then I would use that short starter pipe and butt-weld the pipe to !cat .. :eek:

Yea I figured that out after I had asked, but thanks.

I don't think you will have a problem with it being too loud. What exhaust are you running? I have a gutted cat and it sounds perfect.

Originally posted by scoobysnax83
I don't think you will have a problem with it being too loud.
What exhaust are you running? I have a gutted cat and it sounds perfect.

I have the stock z28 exhaust w/ cat , I wonder , when I rec’vd the mac headers/y-pipe & off-rd-p , if i should try the off-rd-p in place of the !cat w/ my stock exhaust just to hear what it would sound like ... :D
as I’ve gotten older , my tolerances has changed , I don’t like loud music or loud exhaust as I did when I was younger , but , I have heard some very nice after-markt mufflers ( hooker , flowmaster ) systems ... :)

Originally posted by PatriotRed95z
I have the stock z28 exhaust w/ cat , I wonder , when I rec’vd the mac headers/y-pipe & off-rd-p , if i should try the off-rd-p in place of the !cat w/ my stock exhaust just to hear what it would sound like ... :D
as I’ve gotten older , my tolerances has changed , I don’t like loud music or loud exhaust as I did when I was younger , but , I have heard some very nice after-markt mufflers ( hooker , flowmaster ) systems ... :)

well, you know that the pipe that comes with it is not an off road pipe, right? It is a starter pipe. I don't know if you ordered one seperately or anything... I'm sure that exchanging a hollow chamber (gutted cat) for a straight pipe, would make a difference in sound. But I'm not really sure if it would get louder or quieter. Anyway, I have the SLP 2 on the left. I personally think that it is the best sounding exhaust out of them all. You just have to get used to the look :)

Major announcement about the Mac header GP. For over a week now, Jet Hot has been calling our rep at Mac about the status of the headers. We have been told by our rep several times that they should be shipping any day now and he would check and call back. As you can image, he did not. After badgering him several times a day, he finally called back today with the real status. According to the rep at Mac, the flanges aren’t installed yet on the headers. He informed me that it would be 1-2 weeks before the headers could be shipped. I can only apologize for Mac. When the GP was started, I called Mac and was told that they had all the LT1 headers in stock. At this point, if anyone needs to cancel, you can do so and get the full refund (as would be expected).If you wanted another header; I will see what can be done. From Jet Hot’s point of view, we may not use Mac as a vendor in the future. Please feel free to call or email me with any questions.
Thanks
Chris
chris@jet-hot.com
1-800-432-3379 ext 110

so basically we wont be getting them until the end of the month most likley?

Originally posted by Zack
so basically we wont be getting them until the end of the month most likley?

Yes.

Thanks
Chris

Well this is disappointing news, but at least they finally came out with the truth. Why lie about it to begin with? They should have been straight with you Chris.

Thanks for the update.

i have contacted mac and they said that they will have no headers ready for two more weeks because they have not welded the flanges on yet. i don't beleive that any orders have been shipped or will be shipped until the end of february, beginning of march. i know this news is very dissappointing for all of us. if an authority can provide different, more optimistic news, disregard my post. until then


told ya guys, shouldn't get your hopes up. big thumbs down for mac.

thanks you chris for keeping us updated.

Im sorry to hear about how this gp is turning out, but if most of you still remain in this gp and any of you are going !cat and using an offroad pipe in place, would you be willing to part with your starter pipe? scoobysnax83?? PatriotRed95z?? Also, I havent done too much research on what cat I would need to use, is it 3-in/3-out?

:mad: :confused:
Yes , this is very disappointing news, A Big Double Thumbs Down for mac ,
but I still Want my Jet-Hot mac headers .. :thumb:

< b-stevens = would you be willing to part with your starter pipe?
Also, I havent done too much research on what cat I would need to use, is it 3-in/3-out? >

Not at this time , I might not like the sound with just orp & muffler system .. :)
yes there are some cats that have the 3”-in/3”-out size , not sure what brandname ..

< scoobysnax83 = I don't think you will have a problem with it being too loud. >

ya , I quess I‘ll give it a try , who knows , it might sound real good , thanks…:D

Whats the status, I want to know, please...:blah:

Originally posted by Zack
so basically we wont be getting them until the end of the month most likley?
--------------------------------------------------------------------------------



Yes.

Thanks
Chris


This probably still holds true unless something major has changed....which I'm hoping for :D

************************************************** ************************************************** ************************************************** **********!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

two months of waiting, i am going crazy!!!!

Originally posted by 1.8ttolt1
************************************************** ************************************************** ************************************************** **********!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

two months of waiting, i am going crazy!!!!

me too :(

my 2nd payment was deducted from my account today:o

:( :shame: :( :shame: :( :shame: :( :shame: :( :shame:

:mad: :irk: :mad: :irk: :mad: :irk: :mad: :irk: :mad: :irk:

I'm so ready to get these headers on, I'm taking a day off work when they get here so I can put them in!! I'm about to go crazy!

I sure am glad I didn't get in on this GP.....

Originally posted by Cmr0z28
I sure am glad I didn't get in on this GP.....


:think:

Dont you just love worthless posting?

I sure am glad I didn't get in on this GP.....

yeah me too. i ordered my headers last sat. from jet hot and the guy on the phone told me 4 to 5 weeks and i should have them. :)

So, its going to be 4 to 5 weeks before you get yours....and if everything goes as planned, ours will be here by the end of February which if I count right, will be sooner than 4 to 5 weeks. Granted, we have been waiting a while for these but technically havent you waited just as long, if not longer?

Originally posted by ticket_me_redz
So, its going to be 4 to 5 weeks before you get yours....and if everything goes as planned, ours will be here by the end of February which if I count right, will be sooner than 4 to 5 weeks. Granted, we have been waiting a while for these but technically havent you waited just as long, if not longer?

:no:

I wish I had better news. We have been calling Mac almost daily. We still haven't received the headers. According to Mac, they are still waiting on the flanges? I was told they should ship in about a week. I was told that over a week ago. Unfortunately, we have made a descion to no longer offer MAC GP's. We can't trust MAC on the delievery time. I appreciate all the patience. If anyone needs to cancel or wanted to purchase a different set of headers, please let me know.

Thanks
Chris
chris@jet-hot.com

Originally posted by JetHot Coating
I wish I had better news. We have been calling Mac almost daily. We still haven't received the headers. According to Mac, they are still waiting on the flanges? I was told they should ship in about a week. I was told that over a week ago. Unfortunately, we have made a descion to no longer offer MAC GP's. We can't trust MAC on the delievery time. I appreciate all the patience. If anyone needs to cancel or wanted to purchase a different set of headers, please let me know.

Thanks
Chris
chris@jet-hot.com

But you will still offer MACs if a single buyer wanted a set, right???

Yes

It is absolutely ridiculous that a company like MAC can't fulfill this order. Even if its not given to us, you should still see if you can get a discount and save some money... You can go along the lines of implying that your customers are giving you a bad rap due to the delay.

I agree its past the point of being ridiculous. I just cannot believe they dont have any headers ready. Somebody on the MAC end dropped the ball really bad on this one. Maybe you should tell them if the headers arent sitting at Jet-Hot by the end of the week, you are canceling all the orders. Might light a fire under them. But then they would probably rush and do a bad job for us. Either way, not your fault Chris.

Originally posted by scoobysnax83
It is absolutely ridiculous that a company like MAC can't fulfill this order. Even if its not given to us, you should still see if you can get a discount and save some money... You can go along the lines of implying that your customers are giving you a bad rap due to the delay.


I would be more than happy to do this for everyone who has ordered. I will let you know that I have already threatened MAC to cancel all the orders, they responded by saying "ok". MAC doesn't seem to care if everyone canceled thier order. But again, I will contact them about some insentives for the customer's to keep thier orders.

Thanks
Chris
chris@jet-hot.com

Thanks for all the effort Chris. Personally if I were you, it would be hard as hell for me not to cancel all the orders especially if they responded like that. That's wrong for them to treat anyone that way. Makes me wonder now if I want to install a product from a company which deals with its customers that way.

I cancelled my order already. eat that MAC

:mad: :mad:
Yes , this is still Very Disappointing News again ,
A Big Double Thumbs Down for mac … :mad:

But I still Want my Jet-Hot mac Headers ... :thumb:

" this was my quote from an earlier post "....:irk:

I still want them too. But I wish there was another way to stick it to MAC.

has the time schedule changed again, or can we still expect them by the end of Feb.?

ask God, he's the only one that knows.... :rolleyes:

what the sh!t is this! 1.8ttolt1--I forgot to check for a GP so I didn't go thru a GP. I just called Jet Hot up and ordered them in late Jan. I couldn't tell you how I got them so fast. how did this guy order later than us and receive way sooner, when supposedly jet-hot didn't have any headers! I want a prompt response from jet-hot!

here is my interpretation: i understand that they couldn't ship out all the headers if they didn't have them, but they should have shipped our orders in the order they were made!! instead it seems we were all told to wait, while they completed non-group purchase orders to do more business. they knew quite well we might wait for their gp price, whereas non group buyers may look for business elsewhere if they had to wait for our orders. hopefully i'm wrong, but i don't see any evidence that would disprove this.

thread:http://web.camaross.com/forums/showthread.php?s=&threadid=226613

um, I don't know about you guys. But freak the GP price, its nice to save $30 bucks, but not at this cost. No pun intended....

thread:http://web.camaross.com/forums/show...threadid=226613

Interesting........and disturbing.

Well, I did speak with MAC about the problem. They did not budge on the price in order to save the orders placed. On top of this, they do not have a firm date when the orders will ship. The best they can estimate is next week.(sorry)


Thanks
Chris
chris@jet-hot.com

i just cancelled my order! thanks a lot jet-hot for waisting my time! i am driving to rk sport to pick up a set of their 1 3/4 primary mid lengths tomorrow. mac still won't have your headers done for another couple weeks from now. that means IF your lucky you'll get them from jet-hot in early march. i hope you guys won't continue to accept the bull crap explanations chris has been feeding us.

Originally posted by 1.8ttolt1
i just cancelled my order! thanks a lot jet-hot for waisting my time! i am driving to rk sport to pick up a set of their 1 3/4 primary mid lengths tomorrow. mac still won't have your headers done for another couple weeks from now. that means IF your lucky you'll get them from jet-hot in early march. i hope you guys won't continue to accept the bull crap explanations chris has been feeding us.


I have been as honest as I can about the whole problem. I've told everyone they could cancel thier orders or see if I could offer a differnt option. I have called Mac so many time, I can't keep count. I've already stated earlier,I won't run another MAC GP again. I'm not sure why you stated I have been feeding you a "bull crap explanation". If you search the board, you would find I have always tried to help when there is a problem. The bottom line is that I'm sorry this happened.

Chris
Chris@jet-hot.com

Originally posted by 1.8ttolt1
what the sh!t is this! how did this guy order later than us and receive way sooner, when supposedly jet-hot didn't have any headers! I want a prompt response from jet-hot!

here is my interpretation: i understand that they couldn't ship out all the headers if they didn't have them, but they should have shipped our orders in the order they were made!! instead it seems we were all told to wait, while they completed non-group purchase orders to do more business. they knew quite well we might wait for their gp price, whereas non group buyers may look for business elsewhere if they had to wait for our orders. hopefully i'm wrong, but i don't see any evidence that would disprove this.

thread:http://web.camaross.com/forums/showthread.php?s=&threadid=226613

Wow, I'm sorry i brought this up in the other post! If I would have known this was going to stir the pot I would not have mentioned it. I always read about how good the guys at jet hot are and they were cool with me, I was just relaying a positive experience with them. Sorry for any mess I've created here... :shame:

Originally posted by 1.8ttolt1
what the sh!t is this! how did this guy order later than us and receive way sooner, when supposedly jet-hot didn't have any headers! I want a prompt response from jet-hot!

here is my interpretation: i understand that they couldn't ship out all the headers if they didn't have them, but they should have shipped our orders in the order they were made!! instead it seems we were all told to wait, while they completed non-group purchase orders to do more business. they knew quite well we might wait for their gp price, whereas non group buyers may look for business elsewhere if they had to wait for our orders. hopefully i'm wrong, but i don't see any evidence that would disprove this.

thread:http://web.camaross.com/forums/showthread.php?s=&threadid=226613

It took some time to find out who the person was in NM that got his parts. He had order the MAC TF3593 for the 93. All the other orders we are waiting on are the TF94957 for the 94-95. Also, as I note in earlier posts, we had a few in stock that were shipped at the beging and we did receive a few when we had to place the orders with MAC. We shipped the orders in the order as they are placed. No one jumps ahead of another person. Please feel free to cal or email with questions on your order.

Thanks
Chris
chris@jet-hot.com
1-800-432-3379 ext 110

I think the time factor is just making everyone a bit agitated....on both sides. I think everyone is just ready for this thing to be finalized. Seems like its been nothing but headaches for those who ordered and those who set up the GP. Stuff happens and there's nothing you can do about it.

Oh well, I'm hanging in there for my Macs....figure if I've waited this long then a little while longer wont hurt.

Not pointing fingers at anyone (Chris, JetHot, GP buyers), just seems all involved were at the wrong place at the same time. Like I said, stuff happens you cant control.

Thanks again for the GP Chris....even though its hit some bumps!
We appreciate the effort.

Originally posted by JetHot Coating
It took some time to find out who the person was in NM that got his parts. He had order the MAC TF3593 for the 93. All the other orders we are waiting on are the TF94957 for the 94-95. Also, as I note in earlier posts, we had a few in stock that were shipped at the beging and we did receive a few when we had to place the orders with MAC. We shipped the orders in the order as they are placed. No one jumps ahead of another person. Please feel free to cal or email with questions on your order.

Thanks
Chris
chris@jet-hot.com
1-800-432-3379 ext 110

you have mail chris :)

Originally posted by JetHot Coating
It took some time to find out who the person was in NM that got his parts. He had order the MAC TF3593 for the 93. All the other orders we are waiting on are the TF94957 for the 94-95. Also, as I note in earlier posts, we had a few in stock that were shipped at the beging and we did receive a few when we had to place the orders with MAC. We shipped the orders in the order as they are placed. No one jumps ahead of another person. Please feel free to cal or email with questions on your order.

Thanks
Chris
chris@jet-hot.com
1-800-432-3379 ext 110

Chris is right. The 93's had a one year only style manifolds. After further inspection, my 'extra air inj. tube' pipe was blocked off behind the intake for some reason by the previous owner I assume. Mac probably had some 93 style headers in stock due to the low demand for them. Hopefully this clears this up some...

*sigh* I'll be happy as long as I get mine within the next 2 weeks. I NEED to finish this project!

As bad as I wanted to let this slip all the way to the bottom, I was wondering if there has been any good news yet. I do not know if I can take more bad news. :(

Thanks.

Originally posted by ticket_me_redz
As bad as I wanted to let this slip all the way to the bottom, I was wondering if there has been any good news yet. I do not know if I can take more bad news. :(

Thanks.

me neither. I NEED this stuff by next monday:alert: :death:

As long as I have it by next Friday I'm good. I would have liked to have had them on for a trip to the track the first weekend of March but it looks doubtful. I'll be spending that weekend putting them on I guess.

I did speak to MAC yesterday and called again today before responding to this post. As of right now, they have not shipped the headers to Jet Hot. I asked for a date when they would be shipping, I was informed he would check and call me back (yet again). I case anyone would like to speak to our rep at MAC, his number is 1-800-367-4486 and his name is Tex. You can inform him you wanted to check on the status of the TF94957 ordered by Jet Hot. I'm providing this information due to the fact that I haven't been able to make any head way with them. This will make it possible for anyone to voice your option to MAC.

I have can only appologize for the whole situation.

Thanks
Chris
chris@jet-hot.com

I told you you should post that number a long time ago, Chris. ;)

Glad you did. :D

what about for an ls1? specifically 00? Thanx

I guess it will be the middle of March at the earliest now.

I dont see what the hold up is....I can just see 10 guys just sitting around doing nothing with all our headers laying right beside them.

:( :( :( :(

Originally posted by ticket_me_redz
I guess it will be the middle of March at the earliest now.



is that what the MAC rep said?

remember guys, that is what i told you the last time i posted. i had been calling mac and everything they told me about when they would be ready has turned out to be true. that's why i was frustrated with jet-hot. it seemed that i could get the truth outta mac better than they could.

Originally posted by ticket_me_redz I guess it will be the middle of March at the earliest now.

That was just me saying that. That's what I'm guessing. I havent called Mac. I just dont want to hear "no" anymore so I'm not calling.

Middle of March is wishful thinking.

i got tomorrow off, so I will give MAC a call

well, I Called mac, couldnt get ahold of Tex, but someone else told me the headers will be shipped by the end of next week.

So chris, if this holds true, how long after you guys get them will us customers get them?

Originally posted by Zack
well, I Called mac, couldnt get ahold of Tex, but someone else told me the headers will be shipped by the end of next week.

So chris, if this holds true, how long after you guys get them will us customers get them?

We'll need 2 days to coat plus the shipping time to you.

Thanks
Chris
chris@jet-hot.com

I just got off the phone with Tex at MAC and he said they are waiting for the flanges. He didn't know when the flanges would be in and he said he'd call me back after he finds out. By the way, MAC is located in Temecula, California. I was just there playing some golf with some friends. Wish I could have dropped by.

Thanks,
Glenn

So they are still waiting for flanges?!?!?!?:confused: :eek:

I thought this was the hold up over a month ago!:mad:

No knock intended to you Chris but....

This is the GP from HELL:mad:

Frustration is running deep.............:cry:

MAC is in cali?! that means my headers will be doing a double take. At this point, i wouldnt mind paying extra cash to get them overnighted to jet hot and back FROM jet hot

I was thinking the same on the overnite stuff. Anything to get them quicker.

We I had yet another call to MAC. I was informed they are looking to ship out at the end of this week. I did find it interesting, someone called from this GP. He stated that he had gotten a call about this from one of my customers. I told him that was to be expected, after so much time no one would believe me. (Good Job to whom ever called!)

Thanks
Chris
chris@jet-hot.com

MAC better be glad all they got was a call! Its not that we didnt believe you Chris, we just couldnt believe MAC was so terribly slow!! From the posts, I count two people who say they have called. Thanks to all that have.

I just cant see how waiting for flanges takes over a month.
:think: :irk:

as I mentioned, I Called, didnt talk to tex, but asked for him, instead got my info from someone else. Also chris, would overnight shipping be availible for an added charge??

Originally posted by Zack
as I mentioned, I Called, didnt talk to tex, but asked for him, instead got my info from someone else. Also chris, would overnight shipping be availible for an added charge??

Yes, I can ship the parts to you next day air or 2nd day air.

Thanks
Chris
chris@jet-hot.com

Is it to late to get in on this?

Originally posted by Kataklysm
Is it to late to get in on this?


:lol:

:shock: :eek: :irk:
Originally posted by Kataklysm
Is it to late to get in on this?
are you serious or just try'en to be funny !!! :confused:
This GP ENDed on 01/16/04
I can’t believe we are still waiting for mac to get & weld the flanges on … :shame:

You guys still don't have you're stuff so why not? If they havn't sent anything out it wouldn't hurt to add another order.

Originally posted by Kataklysm
You guys still don't have you're stuff so why not?
If they havn't sent anything out it wouldn't hurt to add another order.
then you need to contact chris ( jet-hot ) and see if he can/will add your request ... :D
_____________________
Chris Morris
1-800-432-3379 ext 110
chris@jet-hot.com
_____________________

Anyone want to place bets on whether or not they ship the headers today to Jet-Hot?:p

I'm betting they dont!

Seriously though, if someone finds out something please drop us a line.

Thanks

Well I tried calling MAC today about the order and got some woman on the phone who was incredibly rude. She wanted to know my phone number so she could look up the order. As I tried to explain to her that she would not find my phone number in her records since the order was placed as a whole by a company, she goes all off on me telling me there is no way she can pull it up then. So I just hung up on her since she was being so rude and kept cutting me off.

Incredibly rude.

I've just about had it with all this. MAC's customer support sucks just about as bad as they come.

I've got a bad feeling about the headers too....I just know we are going to have fitment issues with them since they have so many orders backed up. I can just see a crappy job coming.

I'll never buy MAC products again. This is ridiculous.

Originally posted by ticket_me_redz
Anyone want to place bets on whether or not they ship the headers today to Jet-Hot?:p

I'm betting they dont!

Seriously though, if someone finds out something please drop us a line.

Thanks

After 4 calls to Mac today, I did get an answer (not a good one). I was told that the header should be shipped by Friday (didn't happen). I asked what the new date would be, I was simply told by the end of next week. If anyone can locate a set, I would be happy to coat them. I'll do everything I can to try and keep the same price so you don't pay anymore than you would have though this GP. This is outragous. I have had back orders before, but I have never seen anything like this. The owner of Jet Hot tried to contact the owner of Mac, she wasn't avalible??? All I can say right now (again) is I'm sorry.


Chris
chris@jet-hot.com

i never imagined having to deal with this 2 months ago when I got in on the GP.

If I cant have the MACs, I would love to get long tubes instead, but as you mentioned before, the emission friendly ones are out of stock, and hooker lt's dont have emission hookups:mad::(
I'll let you know chris if I can find any other headers I Would like, since i REALLY need headers ASAP

Chris, man its not your fault. No need to apologize for something that is not on you.

MAC sucks. Plain and simple. They have screwed us all over.

:blah:

guys check out the rksports. they are arguably better than the macs (1 3/4 Primaries) and can be coated by jet-hot (although are already coated). they are mids so you won't have problems with ground clearance or emissions that you would have with long tubes. mine were $450 without shipping (i picked them up from rksport).

Ok What's with the Jet-Hot coated Mac headers for a LT1??? What makes them so good? I am going to freshen up my '97 LT1 motor-Lt4 cam mildly ported heads, light flywheel and a balance job and am looking for a set of quality made headers. Considering SLP or ? Am using my stock dual cat back SLP exhaust.

Originally posted by Ken Cemo
Ok What's with the Jet-Hot coated Mac headers for a LT1??? What makes them so good? I am going to freshen up my '97 LT1 motor-Lt4 cam mildly ported heads, light flywheel and a balance job and am looking for a set of quality made headers. Considering SLP or ? Am using my stock dual cat back SLP exhaust.

Seriously, start your own thread in the proper section...

None of us have the headers remember.... :rolleyes:

Edit: Its not necessarily the headers. Its the combination of price from Jet-Hot with the coating and the ease of installation. They aren't that much better than any other comparable header. Just good for the price.

Oh, I wish I had some headers
My car would run so much better
When I lay down to go to bed
I can see them in my head
So bright and shiny I can already see
How much faster my car will be
Then I wake up and I know
MAC doesnt have them ready to go
A single tear rolls down my face
How can I ever win a race
Stock manifolds on my car
Can really only go so far
MAC's service isnt first class
Someone needs a kick in the a**!!

Originally posted by ticket_me_redz
Oh, I wish I had some headers
My car would run so much better
When I lay down to go to bed
I can see them in my head
So bright and shiny I can already see
How much faster my car will be
Then I wake up and I know
MAC doesnt have them ready to go
A single tear rolls down my face
How can I ever win a race
Stock manifolds on my car
Can really only go so far
MAC's service isnt first class
Someone needs a kick in the a**!!

best...poem...ever!!! :D

good poem :metal: :thumb:

send it to MAC!

canceled my order today

I just read this whole thread, and god man that sucks for you guys!!! I have lost respect for Mac mostly....I always like to hear both sides of a story before i make an opinion on the subject....but saying you can deliver, and not doing anything about it for a couple months...someone needs to get off there ass and move over there.

I got respect for Chris and Jet-Hot though, it wasn't his/there fault at all that everyone got screwed, and he is still apologizing and doing everything he can for you guys, even though its not his screw-up. Thats a pretty stand up guy/company. :)

I was just considering Mac headers, but after reading this, Mac just lost themselves at least one sale. I know i'll never order from them, even if its already in a shipping box, just because i don't want to give my money to a company who does stuff like this, even if it is cheaper. I'll bring this up with the local club anytime someone mentions Mac's too.

Thats some sad customer service from those guys :(

did anyone receive their headers yet?

did anyone receive their headers yet?

The headers ordered from MAC in this GP have yet to be shipped from MAC to Jet-Hot, so the answer is no. :( :(


EDIT:
If they dont ship to Jet-Hot today, I'm more than likely going to cancel my order also. I'll just have to go another route. Man, I hate this!:mad:

Okay, called the 800 number on the MAC website 2 minutes ago at 11:19 EST. Ask the guy for availability on the TF94957 and he said he was out of stock and would have some next week hopefully. He informed me that they are still waiting on flanges.

Its been the same song and dance for 2 months...waiting on flanges. How long does it take to make flanges?????????

EDIT:
I've also called a number of different places and no one has any in stock. They all say it would be two weeks minimum or there abouts before they could have them. It seems there isnt a set of MAC headers on the face of the earth I could buy and send to Jet-Hot for coating.

Freakin' amazing

OK Guys,
I decided to take Chris up on his offer and found some headers on my own. He gave me a sweetheart deal that gets me about down what the group purchase price was. HE IS A GREAT GUY.

Anyway, during my search for Headers, I came across a coated set at Musclemotors.com 1-818-888-7779. They have 1 set left and they cost $519. Seems high, but get this, they are already ceramic coated. I asked him if it was the cheap HTS silver paint from MAC and he said no, these are Jet Hot coated. Anyway, someone may want to jump on this one quickly. Only thing I ask is to buy me lunch next time you are in Phoenix!!!

Just make sure you verify the kind of coating on these headers.

Thanks,
Glenn

Well, I called and canceled my order late Friday. I called Muscle Motors and got the last set of the headers they had that were already coated. They are suppose to ship out Monday to me.

Just want to say thanks to Chris for all the work he put into the Group Purchase. I'll certainly recommend Jet-Hot to those in the future due to Chris' superb efforts.

OK, Ticket-me-redz, glad you got the last set. Now I see you live in Georgia. I go out to Marietta for business, so I'll have to collect my lunch next time I go out. ;-)

See you,
Glenn

I live in marietta too if you want to by me lunch. Although, I didn't exactly do anything to help your header situation...but I do feel bad :D

Anyway, good find on those headers

Okay by me!! I'm just glad I have a set to put on. Chevycobb can come too!!

*This post has been edited, due to reconsideration.....*

I was in a pisspoor mood and was all excited about doing my headers this weekend. For all that have read please disregard.

I'm in a better mood now...:)

BTW: Murphy's Law is in FULL EFFECT on this order. First MAC screws up, then FedEx delivers to the wrong address. What else could possibly go wrong..... :(

scoobysnax83
Alright, since I am getting no help in this matter I have decided to bring this to the board. Unanswered emails, odd hours and headers that were delivered to the wrong address has pushed me over the edge. Chris contact me somehow as soon as possible.
i'm sorry that you are having so many diff issues with THE mac headers ,
your getting a Double Wammee , you waited for the GP & now FedEx ..
i e-mailed chris wed morning about any new update of the mac headers and
approx. 20 min's later chris e-mailed back to me ' will be calling mac on thursday ' ,
but i'm sure we'll still be waiting on mac to ship ..
Mac has DROPPED & FUMBLED the (headers) BIG-TIME ..
i'm still tring to decide , if too wait for THOSE mac headers
tobe shipped to jet-hot or just cancel the GP plan ..
but , i still like/want the jet-hot mac's installed on my 95z ..
i believe all mac LT1's headers are the emissions style ..

FYI- I already emailed scoobysnax83 to get with him to see what Jet Hot can do to fix his shipping problem.

FYI- MAC headers status. For the 1st time, MAC called Jet Hot and informed us they are shipping the headers out on 3/25/04 (yet another week). Tex states he will be there to insure they are being shipped out. We told him that we didn't believe him but would be calling next week to confirm.

Thanks
Chris
chris@jet-hot.com

This is a real bummer. I had to cancel my order today due to time constraints, but I just want to thank Chris for all of his help. I e-mailed MAC last night to voice my displeasure. It probably will accomplish nothing, but it made me feel a little better. Thanks again Chris, and I hope those who are still waiting will get their headers soon.

Chris Jet-Hot
FYI- MAC headers status. For the 1st time, MAC called Jet Hot and informed us they are shipping the headers out on 3/25/04 (yet another week). Tex states he will be there to insure they are being shipped out. We told him that we didn't believe him but would be calling next week to confirm.
Chris , that’s good news if mac does ship the headers out 3/25/04 ..
but , how ironic , if it could yet still happen again , no headers shipped ,
oh .... APRIL-FOOLS-DAY ...hahaha....

Originally posted by PatriotRed95z
Chris , that’s good news if mac does ship the headers out 3/25/04 ..
but , how ironic , if it could yet still happen again , no headers shipped ,
oh .... APRIL-FOOLS-DAY ...hahaha....

Wow, I didn't even get in on this GP, but I have been following it, and that would even piss me off

I found another set of MAC headers and bought them. Chris gave me a great deal on the coating since he felt so bad about the delay. Got the headers back from coating today (luckily I live about 5 miles from one of the three Jet Hot plants). They look AWESOME!! Thanks, Chris, JET HOT is the GREATEST!!!

Thanks,
Glenn

Got a question:

For those of you who have canceled your orders, how long did it take to get credited the full amount back on your card?

Thanks

Originally posted by ticket_me_redz
Got a question:

For those of you who have canceled your orders, how long did it take to get credited the full amount back on your card?

Thanks

i think it was like 2 days

2 days???

I called and canceled my order a week from yesterday (Saturday) and I'm still waiting for a credit. Chris emailed me and told me he got my cancelation on his desk Monday and would be turning it over to his accounting department. I guess the accounting department is slow or something. I've emailed 2 or 3 times and I'm still waiting to hear from Chris.

Chris, shoot me an email man and let me know the status on the credit.

Thanks

Mine are lost in never never land. The land where I "never" get my headers :( I'm so mad at FedEX right now. They suck.... :mad: I probably won't be getting mine for even longer than you guys now :cry:

:alert: :( :rolleyes: :eek: :think:
Originally posted by Chris Jet-Hot
FYI- MAC headers status. For the 1st time, MAC called Jet Hot and informed us they are shipping the headers out on 3/25/04 (yet another week). Tex states he will be there to insure they are being shipped out. We told him that we didn't believe him but would be calling next week to confirm.
today should be the DAY that we know if mac plans to ship our headers to jet-hot ,
maybe chris( jet-hot ) can give us an update IF mac has shipped out the headers today.... :lol:

called chris(jet-hot ) just about 20 min’s ago if the mac headers are going to be shipped ,
per chris should know by 18:00pm eastern time if mac has shipped the headers ,
I will call chris later , to confirm if the headers shipped …
thanks chris for all your efforts tring to make this GP work … :thumb:

Let's hope they get it this time!

After 3 calls this afternoon, I finally got an answer about shipping the parts. I was told they have the headers done and they are looking to have everything boxed and shipped out Friday. I will be calling tomorrow and make sure it all ships out.


Thanks
Chris
chris@jet-hot.com

Chris,
I'm the one with the lost FedEX package to 22214. Are you going to be able to send me another set before the issue is resolved with FedEX or will I have to wait? I am very close to cancelling my order. Please let me know.

Thanks.....
Dave

:(
just got off the phone with chris ,,the headers did not ship today :( , but , maybe friday .... i decided not to wait any longer... :think:
i requested chris to Cancel my mac GP order tonight ... :irk:
But the Good News is , i just Ordered the Jet-Hot LT & Y-pipe w/02 ext wires from chris :D , he will ship them out tomorrow( friday ) thanks chris .... :thumb:
Well , now i can run with the Big Boys with LT Headers .....:lol:

Originally posted by PatriotRed95z
:(
just got off the phone with chris ,,the headers did not ship today :( , but , maybe friday .... i decided not to wait any longer... :think:
i requested chris to Cancel my mac GP order tonight ... :irk:
But the Good News is , i just Ordered the Jet-Hot LT & Y-pipe w/02 ext wires from chris :D , he will ship them out tomorrow( friday ) thanks chris .... :thumb:
Well , now i can run with the Big Boys with LT Headers .....:lol:

that what I'm thinking about doing. How much did he quote you for the difference. He quoted me $234 for the headers and y-pipe... I really don't want to drop that much more money, but LT's would be nice..... :D

I called Jet-Hot today. They are now saying Monday.

So, whats the word? :confused:

At this point, you should just send us all LT's, seriously. I can't believe the majority of us have actually waited this long....

i was jsut wondering after reading this post... if i order this set up by myself through jet hot is it still gonna take for ever to get to me? i mean does all your stuff come to you THEN i get mine? cuz this is the set up im looking for!

Originally posted by BaddAss93TA
i was jsut wondering after reading this post... if i order this set up by myself through jet hot is it still gonna take for ever to get to me? i mean does all your stuff come to you THEN i get mine? cuz this is the set up im looking for!

yes...it "should" come to us first.

If that wasn't the case, then I would have paid the $50 I saved a long time ago to get the headers...

Just as an up date. I got a message from Mac after I left last night (I had called 3 times yesterday and was told they would call back). The message was that they were looking to ship the parts out today. I will be calling again today to see if they follow though.

Thanks
Chris
chris@jet-hot.com

I'm happy to inform everyone,Mac has informed they did ship all the parts to Jet Hot yesterday. I should be seeing the parts shortly. As you can imagin, they are a top priority once we get them.

Thanks
Chris
chris@jet-hot.com

thats great new about time the Mac did something right for a change :metal: :bow:

Chris,

I diddn't order mine thorugh the group purchase. Will I still recieve mine as soon as the guys who did order thorough the GP? Thanks.

Originally posted by Eddie Z-28
Chris,

I diddn't order mine thorugh the group purchase. Will I still recieve mine as soon as the guys who did order thorough the GP? Thanks.


All the orders that were placed with Mac were shipped to Jet Hot yesterday. The orders will be coated in the order that they were received thought the GP. As soon as they hit the door, we expect them to be shipped out within 2-3 days.

Thanks
Chris

So did they get there yet? And what was the final word on my question, chris? You never got back to me like you said you would yesterday....

(David Owen, zip code 22214)

Originally posted by scoobysnax83
So did they get there yet? And what was the final word on my question, chris? You never got back to me like you said you would yesterday....

(David Owen, zip code 22214)


No, they should be here today or tomorrow. I did get the answer yesterday, but I forgot to call you back (sorry). I do have the new headers included with this order coming in.

Thanks
Chris
chris@jet-hot.com

Just wanted to let you guys know that the headers are worth waiting for. I ordered mine before the big group purchase.

I did have a bad weld at the collector that I had to fix yesterday. Other than that, they are very nice headers. i could easily tell a difference with them on. They look great too with the Jet-Hot coating. Just remember to put tape on the surfaces that could get scratched when you install them. That will keep the surface nice.

Good luck with your installs.

Dan

Originally posted by JetHot Coating
No, they should be here today or tomorrow. I did get the answer yesterday, but I forgot to call you back (sorry). I do have the new headers included with this order coming in.

Thanks
Chris
chris@jet-hot.com

grrrrr8!!! :thumb:

Has anyone called to find out the status?

Originally posted by scoobysnax83
Has anyone called to find out the status?

I've been using the tracking numbers to track the shippment, we are looking for the parts on 4/6/04.

Thanks
Chris
chris@jet-hot.com

I just got my Camaro back with the Jet Hotted Macs. Love it. Chris knows what customer service really means. JET HOT stands behind their product and treat their customers great. I had one little problem and Chris took care of it.

Guys, even though MAC can't get headers out on time, you will be very pleased with the headers, the coatings, and the treatment from JET HOT.

Thank you Chris!

Thanks,
Glenn

P.S. Used Felpro 1406 gaskets and no leaks!

Just looking for another update. :)

I called him today and he says that he has them and that they started shipping today and hope to get them all out by friday :)

Glad to hear you guys are finally getting these headers. Hopefully i'll get this job I interviewed for and will buy me a set of MAC headers