Any interest in swapping your 3.73 rear plus cash for my Moser 9"

Hi, would there be any interest in somebody trading me their 3.73 rear(must be ASR/ABS) plus cash for my Moser 9" with 3.70s. The 9" isnt set up for tcs, so you would have to live with your abs/asr light on, but atleast you know the thing wouldnt break http://web.camaross.com/bb/smile.gif I am thinking of selling my car, so that is why I am interested in a possible swap. Must be 3.73 since I have Ed Wright tuning and dont want to pay him to change the gear ratio. Need to be within the East Texas/South Texas area. Also, needs to be from and LS1 so the brake backing plates dont have to be changed.

Thanks,
Charlie
odenspike@yahoo.com

------------------
1998 SS #2137
NBM,A4, PI 3200, trans-go shift kit,IRS MAF,!EGR,Whisper lid w/K&N,cold air mod,!TB stop, TB bypass,Nittos, B1 cam, Mac headers w/ORP, ASP pulley,MSD Wires, Bosch Platinums, W/W grill, FTRA,Moser 9" w/3.70s, LS6 intake w/JFP EGR mod, BMR STB, BMR SFC, Global West PHR, LG DSL !front sway bar, dual exhaust through bullets, MAFT, Ed Wright tuning

Successful M6 to A4 conversion on 7/22/01

1/4 - 12.08 @ 112
60ft - 1.68

How much do you want for it i trade. i have a 3.73 rear with ABs and everything.

Sent you mail.

sorry brook, but I need it to be 3.73s since I dont want to pay for another pcm change to ed wright, and also 4.10s are to much for me in an A4.

Thanks though,
Charlie

Also, it is a 31 spline axle and Auburn Posi.

Thanks,
Charlie

I have a rear with GM 3.73's HD zexel new axles TA cover but it's off a LT1. email if you are interested.

Joe

ttt

Charlie how is it going? Havent talked to you in a looonnng time..Hows the new job and everything going? Also, wanted to ask since you are thinkin about selling your car would you be interested in trading wheels with me and some cash? Ive got the painted silver ZR1's and Ive always wanted the Chrome ZR1's..I understand if your not intersted but I thought I would ask ya..

Thanks

Cody

------------------
97 30th Anniv Camaro SS #2374~ Bright Red,M6,Pro 5.0,Torsen Diff.,Oil Cooler,LT4KM,Ported LT1 Heads(GTP),GTP Custom Cam,Comp. Magnum 1.6" RR's,Chromoley Pushrods,Edelbrock Double Roller,Meziere,52MM BBK TB,Hooker LT's w/ Custom 3" Y-pipe,Borla,NGK TR55's,BMR STB,SLP CAI,30# Inj.,OBD1PCM,stock 3.42's,stock clutch
Dyno #'s~ 370rwhp/353rwtq

Currently down for a forged 383 Stroker w Stage 3 heads..
My SS (http://codys97ss.cz28.com/)

E.T.F.A (http://www.etfa.net//) East Texas F-Body Assoc.

-Kiss my SS-

Hey Cody, thanks for the interest, the new job is going ok, just hot as heck down here, but I dont want to swap anything on my car right now. I actually just ordered some 17x11s for my car since it looks like I will probably keep it since I havent had any interest that has panned out.

Take care,
Charlie

Hey I have an LS1 373 rearend with new gears. How much additional $$$ do you need? E-mail me jason_bailey@intuit.com I'm in the Dallas area.

------------------
99' Trans Am Ram Air, NBM, LS1/A4
84' Trans Am Anniversary Edition

Sent you mail!

Charlie

I'll give you $900.00 for it.

Has it been used at the track before?

http://web.camaross.com/bb/smile.gif

Rob

Rob, 1k plus the stock 3.73 rear and it is yours. As for the history of it, well you know that is questionable http://web.camaross.com/bb/wink.gif I think it came from some old foggie from Mississippi.

BTW, got me some 17x11s on today. Looks pretty good.

Charlie

------------------
1998 SS #2137
NBM,A4, PI 3200, trans-go shift kit,IRS MAF,!EGR,Whisper lid w/K&N,cold air mod,!TB stop, TB bypass,Nittos, B1 cam, Mac headers w/ORP, ASP pulley,MSD Wires, Bosch Platinums, W/W grill, FTRA,Moser 9" w/3.70s, LS6 intake w/JFP EGR mod, BMR STB, BMR SFC, Global West PHR, LG DSL !front sway bar, dual exhaust through bullets, MAFT, Ed Wright tuning

Successful M6 to A4 conversion on 7/22/01

1/4 - 12.08 @ 112
60ft - 1.68

[This message has been edited by Charlie Streetman (edited June 20, 2002).]

Charlie,

send me an email. I have a friend interested in your house.

Rob

Rob, sent you mail.

Charlie

Still looking, nothing has panned out yet.

Charlie