how do you A4, 3.73, stock stall, nitto guys launch?

3.73s going in soon and just curious how you A4 guys launch with drag radials, 3.73s, and stock stall.

-Robert

stall it up just before it feels like its gonna break loose...ease it out the whole then punch it

i would go off the line just above idle,wait like half a second then punch it. it was on 17" nittos and i got a best of 1.9 60ft that way. the car will only stall up to like 1-1100 rpms before the tires will start to break loose on a stock convertor.

Definetely get rid of the stock stall. You will see much better 60' times

When I had my stock stall and 3.73's, I just brought the RPM's to about 1000 or so and stomped it as soon as the green light dropped. I got a best of 1.89 on a stock stall doing that with a bolt-on, stock-stalled car on Nitto's.

Originally posted by Antz97ZNJ
stall it up just before it feels like its gonna break loose...ease it out the whole then punch it

Ditto. I'm on street tires though. The best I've done is a 1.96.

I bring mine up to about 2 grand and when the green goes I lay into it.No problems with traction as I am running a monster 305:)