|
||
INTAKE recommedationbalerjoe 11-28-2003, 06:58 PM I've got 220 AFR heads. building 396 stroker. I'm going to run a procharger. where can I get a intake that will take care of my needs. Need one that comes in from 4000 to 8000. Any help will be appreciated!!!!!!!!!!!!!!!!! SMOKNZ 11-30-2003, 09:18 AM I believe the 220 AFR's will require the LT4 intake, that is your only choice, unless these are SBC heads. Bill radik 11-30-2003, 07:15 PM Hmm, I could be confused but i'm running 220 afr's with a stock ported intake. . SMOKNZ 11-30-2003, 08:11 PM Well then you must be confused :D AFR recommends the LT4 intake, as the 220 heads are LT4 heads... Can you get a LT1 intake to work, I would imagine with some grinding... I am not 100% sure on the actual differences between the two, so maybe someone else can chime in who knows. radik 11-30-2003, 10:06 PM It's pretty clear on afr's site i must have got the 180's with afr's full cnc port and revkit. Sorry for the post.. SMOKNZ 12-01-2003, 04:35 AM I run their 190's for the LT1... I wonder why they don't make them anymore? well they aren't on the website anymore, anyone know why? Bill | ||