Parting out my wrecked Z28

Cooter_Z28
06-23-2002, 02:27 PM
Ok here is what i need though. I need a plce for the car since it is still at the towing yard so i can part it out. They are charging me $13 a day storage.

I will have pics of the car soon.

Let me know what you are looking for, i will have a list soon.

------------------
Chris Myers-
*Black '94 Z28 A4
Stock: 14.4s @ 96mph
best et 14.42
best trap 99.12 (spinning 1st and into 2nd)
SLP CAI, ZR1 17x9.5/11 chrome, Progressive Rate Drop Springs, Talor 8mm, 3.42
-- Under construction --
DynoMax Catback, STB,

Thebeast431
06-23-2002, 02:56 PM
I want the drop springs. Email me type and drop size. Also the STB, what color is it?

Thebeast431@aol.com

Travis


------------------
1996 Sebring Silver Z28 A4
GMMG chambered exhaust
SLP CAI JBA Headers Catless
http://cards.webshots.com/cp-15152517-AgPW-album/30435759RUuMfxXqKi

Manaz101
06-23-2002, 04:36 PM
Can i get the drivers side window and all the mechanics to it, tack and the all the insides?



------------------
~Wilson........
Smoked out Black 93 Z28
EGA behind passenger window...
Sleeping Midnight Blue 89 GSX-R 750

Cooter_Z28
06-23-2002, 05:12 PM
Here is the info on the car when i was going to sell it alittle while ago. now everthing from the radiator forward is gone/smashed to he!!


5.7L LT-1 V-8
4 spd Automatic 4L60E
145k miles
Power Windows, Power Door Locks, Cold AC, No T-tops
Red and Black Cloth interior

Oil changed every 3k, (every 4k since I got it with Mobil 1)
New
Transmission, 3 year 60k warranty from GM, running Amsoil synthetic tranny fluid
Torque Converter
Heavy Duty U-joints and yokes (drive shaft balanced as well)
Transmission mount
Replaced at 140k
Drivers power window motor
Exhaust manifold gaskets
Front and rear shocks
Replaced at 125k
AC: compressor, condenser, and accumulator
Water Pump
Opti Spark
Mods
Performance Friction Brake Pads
NGK TR55 spark plugs (140k)
Taylor Spiral Pro 8mm Racing wires (140k)
3.42 gears with new posi unit (130k)
SLP Cold Air with K&N recharge kit
Granatelli Progressive Rat Springs, 1.5 in drop in front and 1 in drop in rear
Custom Chip, includes Laptop with TunerCAT and Free Scan software, and cable
Dyno Max Catback exhaust, needs to be installed
Granatelli Strut Tower Brace, needs to be installed

Clear Head light covers
JVC El Chameleon Head unit
Custom Speaker Box for a single 12” with amp rack that sits on hump in the back
Chrome ZR1 Rims, 17x9.5 front with Yokohama AVS Intermediates 275/40/17 and 17x11 rear with Goodyear GS-C 315/35/17

'94 Bad A Z28
06-23-2002, 07:09 PM
Hey Cooter this is Eddie. How much for the Laptop and all the stuff with it?

------------------
AIM: Bad A 94 Z28
CFFB #141
'94 Z28 A4 T-Tops and Power everything.
MODS:
SLP flowbooster (airfoil) SLP John Aims lowering Pkg. (eibach sport kit) Removed MAF screen SLP adjustable fuel pressure regulator. SLP CAI Meziere Electric Water Pump (HD) SL{/YANK 2800 Stall T/C
Other:
JVC El Kameleon head unit. Two Rockferd Fostgate Punch 12's inside custome box.
Mods to come
Xtreme Energy 224/230. True duels. Ultra Z Pkg.
Bests: (No no new times with the T/C)
R/T ... .556
60' ... 1.916
1/4 ... 13.511 @ 101.56
MPH ... 101.97
(Everything I drive my car on the street with, I run down the track with. No weight reduction at all.)

nvader
06-23-2002, 08:17 PM
You got mail

------------------
Rick CFFB #32
'93 Z28 Patriot Red A4
'01 Dakota R/T Graphite Metallic

Enter the Lair (http://www.mindspring.com/~nvader/)

MustangEater82
06-23-2002, 08:21 PM
i am interested in the springs and shocks, any prices?

they dropped the front 1.5 in. and the rear 1 in.?

jsut checking cuz the norm for v8 springs on a v6 is about a .5 to 1 in. drop in the front due to motor sizes, fornt being a .5 in. higher shouldn't affect my car too much.

------------------
1994 Medium Quaser Blue Camaro 3.4L V6 w/ 5-speed
Homeade CAI with a huge K&N cylinder filter, Single outlet Flowmaster with resonator, Accel 8mm ignition wires, Splitfire plugs, 3.42 gears and posi off a 97 WS6, 1 piece steel driveshaft, Converted to 4-wheel disc brakes, 1LE transmision mount, 1LE sway bars, Prothane bushings and endlinks, BMR Strut tower brace, ASP underdrive pulleys
Lightest Weight W/out driver: 3160
15.696@86.22 with a 2.214 60'!
Best R/T .507
Best 60' 2.106
Father's Stock 2000 Navy Blue Camaro 3.8L V6 w/ 5-speed
15.875@88.25 With wheel spin in 1st
AIM: MustangEater82

Lasombra52
06-23-2002, 08:37 PM
What are you asking for the set of the four ZR1's? I'm looking for 17's for my car. let me now please.

Lasombra52@aol.com

And I'm sorry to hear about your car.

------------------
CFFB Member #148
Jason Bridgewater

www.geocities.com/lasombra52/Lasombra52.html

SLP CAI 04/16/02, Dynomax Muffler with Z28 tips,11/7/2001. Z28 catback, Booster Wire,11/21/2001. Ground effects. Rear Spoiler. Custom rims. Timing adjustment. Red w/ black racing stripes. STB 12/25/01. Flame guages 1/28/02, 10 neons throughout the car, Camaro embroidered floor mats 3/23/02, Scott Settlemire's Signature 2/16/02.

mnypitTA
06-23-2002, 09:21 PM
Sent you mail on the driver window motor

SuprSpdDB7
06-23-2002, 09:22 PM
U HAVE MAIL

teke184
06-23-2002, 09:31 PM
sent mail on some mirrors...

------------------
ARREST-ME RED 96 Z-28, M6...stock for now...but i've only had it three days...1st mod on day 4! TB airfoil...NOW...G2 CAI(modified), K&N, MagnaFlow w/ cutout(closed of course), maf ends, ?cags?, UD pulley, TB bypass, 160stat, SLP fan switch (http://www.slponline.com/view_product.asp?PARTNUMBER=63011), SLP air temp module (http://www.slponline.com/view_product.asp?PARTNUMBER=63010), Hypertech PTM, MSD 6A, Hurst(SS donation) with a Lou's SStick (http://lscamaross.8m.com/lous2.html) and Proform Shiftlight (http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=39231&prmenbr=76), BMR (http://www.bmrfabrication.com) lca, phb and stb, 32/21mm sway bars w/ poly bushings and endlinks, ES poly TA mount, air silencer???
Chrome salad shooters w/ SZ50's
Waiting to go on: 1LE springs, SLP afpr

For Sale: stock exhaust+ sq. tips, 30/19mm sway bars w/ stock bushings

mg95ta
06-23-2002, 10:33 PM
how much for the rear hatch plastic interior panels that cover the speakers and what color are they?

Thebeast431
06-24-2002, 07:04 AM
Email me about the speakers pls. If you have pics pls send them also..

Thebeast431@aol.com
Travis

------------------
1996 Sebring Silver Z28 A4
GMMG chambered exhaust
SLP CAI JBA Headers Catless
http://cards.webshots.com/cp-15152517-AgPW-album/30435759RUuMfxXqKi

DaSilverZ28
06-25-2002, 03:06 AM
Hey Cooter its Jake with the Silver LS1 Z28...

I need a passenger mirror housing and the mirror and your AC compressor...They are the same on the LS1s right???

Jake

------------------
98 Sebring Silver Z28
A4
REAL SLOW

OutKast
06-25-2002, 06:14 PM
I'm interested in the rear axle assembly...Would you be willing to take $200 for it. No shipping required and I could probably come over and give you a hand pulling it out.

I need to find one asap that's still in good shape. So, I would be willing to do it this weekend if possible.

[This message has been edited by OutKast (edited June 25, 2002).]

Miller96Z
06-25-2002, 09:08 PM
How much for the entire air condition unit....compressor condensor etc.

mg95ta
06-25-2002, 10:14 PM
cooter how much for your damaged body if you know what i mean?

mnypitTA
06-26-2002, 07:38 PM
I sent you an email but got no response. I need a driver side window motor pretty bad.

thanks

------------------
John Peacock

96 Z28 Silver droptop
95 LandRover Discovery FOR SALE-$9995OBO
00 Mazda 626 V6 5sp (15.1 93.2mph)No Mods

MadKilla
06-27-2002, 09:43 AM
If people want the driver side door glass and motor i will take the driver door shell. I have manual windows and don't need it anyway. Hey chris, when you get the car out of towing let me know, I will come by and grab dozens of little parts I need, and some big ones. I need a rear bumper, dashboard, turn signal stalk, ashtray, fender retainers, screws, bolts, radiator, a cheap battery, hood struts, rear hatch glass, your plastic roof, headliner, etc etc Just let me know and I will give you cash and take some parts. I'll give you money for the things that would sit in your garage for years, and help you take it apart to get to them. I can strip down a car in 3 hours, I have lots of practice http://web.camaross.com/bb/mad.gif http://web.camaross.com/bb/biggrin.gif Let me know.

------------------
[URL=http://www.geocities.com/jpw32811/znred.html [/URL]

2002 NBM SS
13.3@108<-- 1st and only pass ever in M6
94 Z28 Mid 12's with some traction

Gun control is hitting what you aim at

OutKast
06-27-2002, 02:51 PM
Someone else can have the rear...found one in Tampa this morning. Not that you seem to be responding to anyone anyway.

mnypitTA
06-27-2002, 06:33 PM
Nevermind I am getting a new one. I cant wait for you. ARE YOU THERE??? You could probably sell most of your parts if you responded to someone.



------------------
John Peacock

96 Z28 Silver droptop
95 LandRover Discovery FOR SALE-$9995OBO
00 Mazda 626 V6 5sp (15.1 93.2mph)No Mods

Cooter_Z28
06-27-2002, 06:37 PM
Sorry about not responding. I have been busy with work and school, i havent had time to get to a computer recently. Right now i am working on responding to everyone. I have responded to all the emails now i am working on the posts.

What i REALLY NEED is a place for the car while it is being parted out

MadKilla- If you can get me a place to put the car while i part it out i'll let you have the shell of the car for dirt cheap.

Everyone, please eamil me what you are interested in and make an offer. It will make things alot easier on me and i will be able to respond quicker.

Cooter_Z28
06-27-2002, 06:40 PM
Oh ya i have a brand new poly tranny mount the i just got from thunderracing.com that i dont need now.

UnderDogRS
06-28-2002, 04:09 AM
cooter.. call me tomarrow... i thinking about getting your motor and trans..
later,
Alex

teke184
06-28-2002, 08:46 AM
have you tried a self storage place for the car? seems like i've heard of them charging ~$50 a month to store cars...pay for one month, strip it and then junk what's left!

just a thought

MadKilla
06-28-2002, 01:03 PM
I will work on Fiance about keeping it in the Garage, on condition that the car is still mobile when its near done, wheels and tires, steering wheel, brakes, so I can get it out. When its off the tow bed and in the junk yard we can remove everything thats left. K-frame, a-arms, wheels, brakes etc.. And they can crush whats left, or keep it. How bad is the damage? I might just buy the whole car from you.

Cooter_Z28
06-29-2002, 12:06 PM
The car can roll fine. It isnt too badly damaaged, except the car has 147k on it so it is too much for me to have fixed.

all the damage is is infront of the motor, nose clip, headlights, winshild washer resavor, radiator, radiator support, donky dong, hood and fenders, bumper impact beam, windshild that dash piece with the defrostor(from the airbags).


[This message has been edited by Cooter_Z28 (edited June 29, 2002).]

97' Drone
06-29-2002, 03:46 PM
I'll buy youre panhard bar,2 lower control arms,and stabilizer bar ($150.if it sounds good to you) and sorry about youre loss.

------------------
97 Z28 A4 white w/black top,k&n fipk,flowmast amethunder,hpp3,160 stat,+free mods.

S. Holley
06-29-2002, 05:47 PM
what about your driver and passenger seats?

S. Holley
07-01-2002, 11:36 PM
curious about the seats ....color...how much?

would you take 1200 for motor and trans...

it would look nice in my vette..

------------------
-holleywood 84 camaro, broke rear-end! Best time 7.46@ 96mph in the 1/8. That's with juice! Brand New 2000 SS SLP with all the goodies except level II suspension. BEST Time aahh 12.9 @ 113. And a sorry 2.36 60ft! 1977 Corvette...project car, with 270 comp cam, intake, 2400 stall, mid america cambered exhaust.

danner
12-17-2002, 05:47 PM
i am looking for a turn signal stalk - the piece that the turn signal fits into

2002Z28SSConv
12-18-2002, 11:10 AM
Talk about resurecting the dead... :D

That's Easter - not Christmas.

BadAssed93Z
12-19-2002, 08:27 AM
i remember this post. a lot of people wrecked there cars around the same time this summer.

danner
12-19-2002, 09:16 AM
Thats funny, did a search and this and a few other post came. did not notice the date. I am trying to help a freind out locally that does not have a computer. Anyway, If you dont have this than DEAD THREAD!!!!!!!!!!!!!!!!:D

SuprSpdDB7
12-22-2002, 01:06 AM
you still have the rearend??
how much would you be willing to sell it for?
no shipping needed...

MadKilla
12-24-2002, 10:03 AM
What's the scoop on the car? Do you stll need a place for it. I can keep it at my place for about 2-3 weeks still if you need. The only thing is we will have to tear the car down to parts during that time. We can have a stripped down to the frame in those 2 weeks. I will get my friend's cherry picker and the fuel rail plate to pull the motor. We can get down to a bare rolling frame, the only thing I question being able to pull is the rear since it will have to roll. If we do this though I expect an excellent deal on the parts a need ;) , no drivetrain parts needed though. Let me know man we'll get it done.

darkoverlift
12-27-2002, 11:08 PM
SLP CAI still for sale.. I need a CAI bad...

2002Z28SSConv
12-28-2002, 08:23 AM
Heads up people.

Cooter hasn't even posted on this site since September. The car was wrecked in June. I doubt he's gonna see your messages.

You might try emailing him instead. But chances are good that the car is already gone.